search query: @author Arrenius, Pasi / total: 1
reference: 1 / 1
« previous | next »
Author: | Arrenius, Pasi |
Title: | Evaluation environment for new technologies in automation design |
Automaatiosuunnittelun uusien tekniikoiden arviointiympäristö | |
Publication type: | Master's thesis |
Publication year: | 2006 |
Pages: | 73 s. + liitt. Language: eng |
Department/School: | Automaatio- ja systeemitekniikan osasto |
Main subject: | Systeemitekniikka (AS-74) |
Supervisor: | Koivo, Heikki |
Instructor: | |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark TKK 6731 | Archive |
Keywords: | pulp batch cooking batch automation IEC 61499 ISA 88.01 sellun eräkeitto panosautomaatio IEC 61499 ISA 88.01 |
Abstract (fin): | Tämä diplomityö on osa Teknillisen Korkeakoulun Automaation tietotekniikan laboratorion USVA - tutkimusprojektia. USVA lyhenne tarkoittaa uusien standardien ja tekniikoiden vaikutusta automaatiosuunnittelussa. Diplomityön rooli tutkimusprojektissa oli rakentaa fyysinen laitteistoympäristö, jossa voidaan testata uusia automaatiosuunnittelun tekniikoita kuten ohjausjärjestelmiä ja ohjelmointikieliä. Alustana arviointiympäristölle toimi tutkimus- ja opetuskäyttöön tarkoitettu Feston Didactic laboratorioprosessilaitteisto. Arviointiympäristön rakentamisen taustalle haluttiin löytää teollisuuden prosessi, joka olisi mahdollista toteuttaa hyvin myös Feston laitteistolla. Lisäksi haluttiin, että prosessi olisi ohjaustehtäviltään hyvin monipuolinen, mikä johti siihen, että teollisuuden referenssiprosessiksi valittiin sellun eräkeiton lipeäkierto. Sellun eräkeitto on panosprosessi, jonka ohjauksessa käytetään sekä jatkuvaa säätöä, että epäjatkuvaa sekvenssiohjausta. Täten uusia automaatiosuunnittelutekniikoita voitiin testata mahdollisimman monipuolisella laitteistolla. Sekä fyysinen laitteisto, että sellun eräkeitto-ohjaus mallinnettiin panosautomaatiostandardin ISA 88.01 mukaisesti. Saadun laitteistomallin ja eräkeiton- sekvenssimallin avulla voitiin määritellä ensimmäisen ohjaussovelluksen toteutus. Ensimmäinen tutkittava automaatiosuunnittelutekniikka oli uusi IEC 61499 toimilohko-ohjelmointistandardi, jolla toteutettiin tässä työssä ensimmäinen prosessin ohjaus. Diplomityön lopputuloksena saatiin laitteiston lisäksi myös sovitus käytössä olevan panosautomaatiostandardin ja uuden IEC 61499 standardin välille. |
ED: | 2006-07-06 |
INSSI record number: 32133
+ add basket
« previous | next »
INSSI