search query: @keyword production management / total: 14
reference: 4 / 14
« previous | next »
Author:Huttunen, Soili
Title:Vanerilaatikoiden valmistusprosessin analysointi ja vaihtoehtoisten valmistusmenetelmien etsiminen
Analyzing the production process of customized plywood cases and finding alternative production methods
Publication type:Master's thesis
Publication year:2013
Pages:iv + 55      Language:   fin
Department/School:Puunjalostustekniikan laitos
Main subject:Puutekniikka   (Puu-28)
Supervisor:Paltakari, Jouni
Instructor:Kairi, Matti ; Kotilahti, Timo
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  2372   | Archive
Keywords:production management
lead-time
layout
investment project
plywood case
tuotannonohjaus
läpimenoaika
layout
investointiprojekti
vanerilaatikko
Abstract (eng): The objective of this Master's Thesis was to analyse the production process of customized plywood cases and survey the possible alternatives to optimize the process.

In present-day operational environment it is necessary for a company to continuously improve its production management and cost efficiency.
In the literary part of this thesis the basics of development of production processes, production management and investment projects are introduced.

The practical part of the thesis begins with analysing the current production process of the plywood cases.
The stages are mapped and the problematic ones identified.
The process was found to be laborious and cost-wise inefficient.
The production capacity was also insufficient under heavy order load.
The layout of the production space was far from ideal.
Two stages were identified to be the most problematic: the manual nailing of the plywood elements and the assembly of the cases in the pressing line.
The possibility to automatize these stages was one focus of the work.
This sort of change in the manufacturing method would require changes also in the structure of the cases and such changes were studied using three different test cases.
A few equipment suppliers for a nailing portal were also contacted during the work.

The results gave indication that it could be possible to change the structure of the cases in a way that the most laborious stages could be automatized and thus optimized.
Some problems occurred, however, in the structures of the test cases and thus some more research is required.
As it turned out that there is equipment for the planned nailing portal available, it could be worthwhile continue the development work in cooperation with the equipment suppliers.
Abstract (fin): Tämän diplomityön tavoitteena oli tarkastella käyttötarkoitustaan varten räätälöityjen vanerilaatikoiden valmistusprosessia ja kartoittaa mahdollisia vaihtoehtoja sen tehostamiseksi.

Tämän päivän toimintaympäristössä teollisen yrityksen on pärjätäkseen pyrittävä jatkuvasti kehittämään tuotantoaan ja parantamaan sen kustannustehokkuutta.
Työn kirjallisuusosiossa tutustuttiin tuotantoprosessien kehittämiseen ja tuotannonohjaukseen sekä käytiin läpi investointiprojektin toteuttamisen perusteet.

Työn käytännön osuuden aluksi laatikoiden valmistusprosessi analysoitiin nykymuodossaan.
Työvaiheet kartoitettiin ja prosessin ongelmakohdat tunnistettiin.
Prosessin todettiin olevan raskas ja kustannustehokkuudeltaan huono.
Miehistökuormitus oli suurta ja tuotantokapasiteetti suuremman tilauskuormituksen alla toisinaan riittämätön.
Tuotantotilojen layout ei myöskään palvellut tehokasta laatikonvalmistusta.

Muutostarpeiden havaittiin kohdistuvan erityisesti kahteen työvaiheeseen: vanerielementtien naulaamiseen ja laatikoiden kokoamiseen puristinlinjalla.
Työssä tutkittiin, olisiko kyseisiä työvaiheita mahdollista automatisoida.
Tällainen valmistusmenetelmän muutos vaatisi muutoksia myös laatikon nykyiseen rakenteeseen.
Työssä tutkittiin myös kolmen erilaisen vaihtoehtoisen rakenteen toimivuutta käyttötarkoituksessaan sekä kartoitettiin mahdollisia laitteistotoimittajia osittain automaattiselle naulausportaalille.

Työn tulokset antoivat viitteitä siitä, että laatikoiden rakennetta olisi mahdollista muuttaa niin, että työläimpiä työvaiheita voitaisiin automatisoida ja näin tehostaa.
Tutkituissa rakenteissa ilmeni kuitenkin myös ongelmakohtia, joten lisätutkimukset aiheesta ovat tarpeen.
Myös laitteistoa suunnitellun kaltaiselle naulainportaalille osoittautui olevan saatavilla, ja kehitystyötä voisikin olla järkevää jatkaa yhteistyössä laitteistotoimittajien kanssa.
ED:2013-05-20
INSSI record number: 46161
+ add basket
« previous | next »
INSSI