search query: @keyword MRP / total: 12
reference: 5 / 12
« previous | next »
Author:Kokkonen, Juha-Matti
Title:Komponenttitehtaan osien ohjausmallin suunnittelu
Designing a control system for parts of a component factory
Publication type:Master's thesis
Publication year:2012
Pages:110 + [9]      Language:   fin
Department/School:Koneenrakennustekniikan laitos
Main subject:Tuotantotekniikka   (Kon-15)
Supervisor:Niemi, Esko
Instructor:Tiainen, Antero
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto     | Archive
Keywords:production planning
inventory control
MRP
valve manufacturing
tuotannonohjaus
varastonhallinta
MRP
venttiilivalmistus
Abstract (eng): The aim of this thesis is to create a control system for standard valve parts required in Metso Automation's new valve factory.
In the factory most manufactured valves, which are mainly standard valves with a fixed price and delivery time, are assembled in the so-called Green assembly line.
In order to achieve the on-time delivery target, the availability of the parts required in the Green assembly line must be improved and maintained at a certain level.

The thesis consists of a literature review, an as-is analysis and a case chapter in which the new control system is designed.
The design of the control system is based on the development areas identified in the as-is analysis by interviews, data-analyses and other observations.
The main targets of the system are improving inventory control and management, increasing visibility of production and warehousing, and levelling the flow of inbound logistics.
Suggestions and best practices found in the literature review are used in the design phase of the thesis.

In addition to material resource planning (MRP) and two-bin control methods already used in the company, three new control policies are introduced in the thesis.
The new methods are reorder-point control, forecast ordering and visual Kanban-based pull-control.
The most critical factors affecting control of the parts are defined and used for segmentation of parts and for selection of the best control policy for each of these part groups.
Moreover, processes and measurements for implementing and maintaining the new system are defined to ensure functionality of the new control system, In future, segmentation and part-level analyses can also be utilized for inbound logistics and warehouse planning and for visualizing the production flow at the shop-floor level.
Abstract (fin): Diplomityön tavoitteena on suunnitella ohjausmalli Metso Automation Oy:n keväällä 2011 avatun venttiilitehtaan vakioventtiilien osille.
Uudessa tehtaassa on eriytetty oma tuotantolinja eli vihreä kokoonpanolinja volyymituotteille, jotka koostuvat pääsiallisesti ennalta sovittuun hintaan ja toimitusaikaan asiakkaille toimitettavista vakioventtiileistä.
Työssä suunniteltavan ohjausmallin tarkoituksena on parantaa vihreän kokoonpanolinjan tarvitsemien vakioventtiilien osien saatavuutta asetettuihin toimitusvarmuustavoitteisiin pääsemiseksi.

Diplomityö koostuu kirjallisuustutkimuksesta, nykytila-analyysista sekä ohjausmallin toiminnan ja käyttöönoton suunnittelusta.
Työssä suunniteltavalla ohjausmallilla pyritään vastaamaan nykytila-analyysissa haastatteluiden ja data-analyysien avulla löydettyihin kehityskohteisiin eli varastonhallinnan menetelmien kehittämiseen, visuaalisuuden lisäämiseen sekä saapuvan materiaalivirran tasoittamiseen.
Ohjausmallin suunnittelussa pyritään hyödyntämään kirjallisuustutkimuksessa esiin tulevia suosituksia ja toimintatapoja.

Työssä suunniteltavassa ohjausmallissa venttiiliosille määritellään kolme uutta ohjaustapaa aiemmin käytössä olleiden tarvelaskenta- ja kaksilaatikko-perusteisten menetelmien rinnalle.
Uudet ohjaustavat perustuvat tilauspiste- ja ennusteohjaukseen sekä visuaaliseen Kanban -ohjaukseen.
Työssä määritellään osien ohjauksen kannalta merkittävimmät tekijät, joiden perusteella venttiiliosat segmentoidaan eri ohjaustapojen mukaisiin ryhmiin.
Työssä suunnitellaan lisäksi prosessit ja mittaristot osien ohjaamisen ylläpitämiseen sekä toiminnan mittaamiseen jatkossa.
Tulevaisuudessa työssä tehtyä osien segmentointia on mahdollista hyödyntää myös tehtaan sisäistä logistiikkaa, töiden visuaalista ohjausta sekä varastojen fyysistä sijaintia suunniteltaessa.
ED:2012-05-09
INSSI record number: 44450
+ add basket
« previous | next »
INSSI