haku: @keyword gasification / yhteensä: 16
viite: 10 / 16
Tekijä:Sah, Sanjay Kumar
Työn nimi:Feasibility study of bio-refining routes
Julkaisutyyppi:Diplomityö
Julkaisuvuosi:2010
Sivut:v + 111 s. + liitt. 23      Kieli:   eng
Koulu/Laitos/Osasto:Biotekniikan ja kemian tekniikan laitos
Oppiaine:Tehdassuunnittelu   (Kem-107)
Valvoja:Hurme, Markku
Ohjaaja:Melin, Kristian
OEVS:
Sähköinen arkistokappale on luettavissa Aalto Thesis Databasen kautta.
Ohje

Digitaalisten opinnäytteiden lukeminen Aalto-yliopiston Harald Herlin -oppimiskeskuksen suljetussa verkossa

Oppimiskeskuksen suljetussa verkossa voi lukea sellaisia digitaalisia ja digitoituja opinnäytteitä, joille ei ole saatu julkaisulupaa avoimessa verkossa.

Oppimiskeskuksen yhteystiedot ja aukioloajat: https://learningcentre.aalto.fi/fi/harald-herlin-oppimiskeskus/

Opinnäytteitä voi lukea Oppimiskeskuksen asiakaskoneilla, joita löytyy kaikista kerroksista.

Kirjautuminen asiakaskoneille

  • Aalto-yliopistolaiset kirjautuvat asiakaskoneille Aalto-tunnuksella ja salasanalla.
  • Muut asiakkaat kirjautuvat asiakaskoneille yhteistunnuksilla.

Opinnäytteen avaaminen

  • Asiakaskoneiden työpöydältä löytyy kuvake:

    Aalto Thesis Database

  • Kuvaketta klikkaamalla pääset hakemaan ja avaamaan etsimäsi opinnäytteen Aaltodoc-tietokannasta. Opinnäytetiedosto löytyy klikkaamalla viitetietojen OEV- tai OEVS-kentän linkkiä.

Opinnäytteen lukeminen

  • Opinnäytettä voi lukea asiakaskoneen ruudulta tai sen voi tulostaa paperille.
  • Opinnäytetiedostoa ei voi tallentaa muistitikulle tai lähettää sähköpostilla.
  • Opinnäytetiedoston sisältöä ei voi kopioida.
  • Opinnäytetiedostoa ei voi muokata.

Opinnäytteen tulostus

  • Opinnäytteen voi tulostaa itselleen henkilökohtaiseen opiskelu- ja tutkimuskäyttöön.
  • Aalto-yliopiston opiskelijat ja henkilökunta voivat tulostaa mustavalkotulosteita Oppimiskeskuksen SecurePrint-laitteille, kun tietokoneelle kirjaudutaan omilla Aalto-tunnuksilla. Väritulostus on mahdollista asiakaspalvelupisteen tulostimelle u90203-psc3. Väritulostaminen on maksullista Aalto-yliopiston opiskelijoille ja henkilökunnalle.
  • Ulkopuoliset asiakkaat voivat tulostaa mustavalko- ja väritulosteita Oppimiskeskuksen asiakaspalvelupisteen tulostimelle u90203-psc3. Tulostaminen on maksullista.
Sijainti:P1 Ark Aalto  3430   | Arkisto
Avainsanat:gasification
biomass
F-T biofuel
bio-methanol
Tiivistelmä (eng): Alternative to petroleum fuels for example: diesel, gasoline and jet fuel are becoming major challenges for scientists due to requirement of energy concentrated liquid fuel for the transporting vehicles.
The main objective of this thesis work is to investigate the feasible route to produce bio fuel from biomass.
The study has been focussed on thermal route of biomass gasification process.
The two alternatives: F-T bio fuel and bio methanol have been studied in terms of investment and cost of products.
The cost of products (F-T bio fuel and bio-methanol) and sensitivity analysis has been applied for the comparison with the price of respective fuel replacements as basis for the feasibility study.
PRO/lI has been used as simulating tool.

The fixed cost investment require 223 and 225 million Euros for F-T bio fuel (119 400 t/a) and bio methanol (239 580 t/a) plant with normal pay back period of 9.71 and 10.12 years respectively.
The yields of F-T bio fuel and bio methanol are 37.68 % and 75.62 %.
The yield of bio methanol is nearly twice as much that of F-T bio fuel.
The recycling increases the yield significantly both in F-T bio fuel and bio methanol plant.
The cost of product of F-T bio fuel was found 116 Euros/barrel which is nearly 1.5 times higher than price of crude oil (56 Euros/barrel).
Similarly, the cost of product of bio methanol was 457 Euros/ton which is nearly twice as much market price of methanol (250 Euros/ton).

F-T bio fuel process might be feasible in near future when the crude oil supply becomes scarce and price high.
Among the two thermal processes, gasification has promising future since it produces Fischer - Tropsch bio fuel (F-T oil) which is almost free of sulphur.
This thesis work has the direct advantage of utilization of this knowledge in other gasification process.
Gasification technology has been applied to convert coal into synthetic fuels in many countries including South Africa and Australia.
ED:2010-10-12
INSSI tietueen numero: 41054
+ lisää koriin
INSSI