haku: @keyword defibration / yhteensä: 1
viite: 1 / 1
« edellinen | seuraava »
Tekijä: | Wang, Jiajun |
Työn nimi: | Defibration of wood chips during delignification |
Julkaisutyyppi: | Diplomityö |
Julkaisuvuosi: | 2010 |
Sivut: | iii + 65 + [3] Kieli: eng |
Koulu/Laitos/Osasto: | Puunjalostustekniikan laitos |
Oppiaine: | Puunjalostuksen kemia (Puu-19) |
Valvoja: | Vuorinen, Tapani |
Ohjaaja: | Engström, Johan |
OEVS: | Sähköinen arkistokappale on luettavissa Aalto Thesis Databasen kautta.
Ohje Digitaalisten opinnäytteiden lukeminen Aalto-yliopiston Harald Herlin -oppimiskeskuksen suljetussa verkossaOppimiskeskuksen suljetussa verkossa voi lukea sellaisia digitaalisia ja digitoituja opinnäytteitä, joille ei ole saatu julkaisulupaa avoimessa verkossa. Oppimiskeskuksen yhteystiedot ja aukioloajat: https://learningcentre.aalto.fi/fi/harald-herlin-oppimiskeskus/ Opinnäytteitä voi lukea Oppimiskeskuksen asiakaskoneilla, joita löytyy kaikista kerroksista.
Kirjautuminen asiakaskoneille
Opinnäytteen avaaminen
Opinnäytteen lukeminen
Opinnäytteen tulostus
|
Sijainti: | P1 Ark Aalto 2251 | Arkisto |
Avainsanat: | kraft cooking oxygen delignification defibration |
Tiivistelmä (eng): | In this thesis work, the possibility of producing softwood craft pulp without mechanical disintegration in the fiber line was investigated. Delignification was extended in two oxygen stages to achieve normal kappa level before bleaching. Cooking chip thickness had only little impact on delignification performance. The defibration point was found at 3 hour cooking at cooking temperature 150°C and EA charge of 17.5%. Kappa number at this point was 80 and yield was 50%. A two-stage oxygen delignification was applied after the tested cooking. The results suggested that an intermediate washing was not necessary between the oxygen stages. Up to 75% of Pignin could be removed in O1/O2 stages. Kappa number of 4 hour cooked pulp after O1/O2 was 15. The total yield of 4 hour cooked pulp arrived at 47%. At the defibration point the value was around 48%. The rejects content after O1/O2 stage was close to zero. In addition, contents of phenolic lignin in pulp samples were measured by reflectance UVNis spectrometer. |
ED: | 2010-11-29 |
INSSI tietueen numero: 41377
+ lisää koriin
« edellinen | seuraava »
INSSI