haku: @keyword 2-methylfuran / yhteensä: 1
viite: 1 / 1
« edellinen | seuraava »
Tekijä: | Castellazzi, Sara |
Työn nimi: | Hydrotreatment of furfural to 2-methylfuran with carbon catalysts |
Julkaisutyyppi: | Final Project-työ |
Julkaisuvuosi: | 2015 |
Sivut: | vii + 110 Kieli: eng |
Koulu/Laitos/Osasto: | Kemian tekniikan korkeakoulu |
Oppiaine: | Industrial Chemistry (KE-40) |
Valvoja: | Lehtonen, Juha |
Ohjaaja: | Jaatinen, Salla ; Karinen, Reetta |
Elektroninen julkaisu: | http://urn.fi/URN:NBN:fi:aalto-201506303452 |
Sijainti: | P1 Ark Aalto 4611 | Arkisto |
Avainsanat: | 2-methylfuran furfural liquid-phase hydrogenation carbon catalysts |
Tiivistelmä (eng): | 2-methylfuran (2-MF) production through liquid-phase catalytic hydrogenation of furfural using 2-propanol as solvent was investigated over carbon-supported catalysts in a batch reactor. Acceptable values of 2-MF yields and selectivity were achieved using impregnated catalysts supported over activated carbon Norit® RB4C. The best results were observed using 2%/2% CuFe catalysts after 5 hours reaction time at 230°C: 42.75% yield and 42.82% selectivity. Nevertheless, with some nickel-based catalysts, such as 2% and 10% Ni, almost 33% and 41% yields of 2-MF were achieved, respectively. An important outcome was that copper catalysts, historically the best catalysts suitable for 2-MF production, showed better results when used in combination with other metals, such as Fe or Ni. Moreover, it is advisable to reduce Cu at lower temperature ( 200°C) in order to improve catalytic performances. Other types of support (i.e. acid-washed Norit® RX3) and preparation techniques (i.e. atomic layer deposition) were tested showing poor results. |
ED: | 2015-08-16 |
INSSI tietueen numero: 51862
+ lisää koriin
« edellinen | seuraava »
INSSI