haku: @keyword FEM / yhteensä: 110
viite: 38 / 110
Tekijä: | Silwal, Bishal |
Työn nimi: | Computation of eddy currents in a solid rotor induction machine with 2-D and 3-D FEM |
Julkaisutyyppi: | Diplomityö |
Julkaisuvuosi: | 2012 |
Sivut: | ix + 62 Kieli: eng |
Koulu/Laitos/Osasto: | Sähkötekniikan laitos |
Oppiaine: | Sähkömekaniikka (S-17) |
Valvoja: | Arkkio, Antero |
Ohjaaja: | Belahcen, Anouar |
Elektroninen julkaisu: | http://urn.fi/URN:NBN:fi:aalto-201209213171 |
OEVS: | Sähköinen arkistokappale on luettavissa Aalto Thesis Databasen kautta.
Ohje Digitaalisten opinnäytteiden lukeminen Aalto-yliopiston Harald Herlin -oppimiskeskuksen suljetussa verkossaOppimiskeskuksen suljetussa verkossa voi lukea sellaisia digitaalisia ja digitoituja opinnäytteitä, joille ei ole saatu julkaisulupaa avoimessa verkossa. Oppimiskeskuksen yhteystiedot ja aukioloajat: https://learningcentre.aalto.fi/fi/harald-herlin-oppimiskeskus/ Opinnäytteitä voi lukea Oppimiskeskuksen asiakaskoneilla, joita löytyy kaikista kerroksista.
Kirjautuminen asiakaskoneille
Opinnäytteen avaaminen
Opinnäytteen lukeminen
Opinnäytteen tulostus
|
Sijainti: | P1 Ark Aalto 1397 | Arkisto |
Avainsanat: | electrical machines finite element method FEM eddy currents coupled models |
Tiivistelmä (eng): | Although a two-dimensional numerical analysis of an electrical machine provides an approximately accurate solution of the electromagnetic field in the machine, a three-dimensional study is needed to understand the actual phenomena. But due to the large problem size and the complex geometries, the three dimensional model requires a huge amount of degrees of freedoms (DoFs) to be solved, which is not possible with a limited computing resources. Therefore, a coupled 2D-3D model can be the best alternative to solve such type of problems. In this thesis, a 2-D finite element analysis is performed on a solid rotor induction motor by an in-house software FCSMEK. The eddy current in the solid steel rotor was computed. A 3-D model for the same machine was built and solved in COMSOL MultiphysicsTM. To reduce the computation time of the 3-D model, the solution of the 2-D model was used as the source to the 3-D model where the stator current density is used as a transferred variable. The eddy currents are computed and the results from both 2-D and 3-D simulations are compared. Other quantities of interest such as the torque of the machine computed with the 2-D and 3-D models are also computed and compared. |
ED: | 2012-08-20 |
INSSI tietueen numero: 45058
+ lisää koriin
INSSI