haku: @keyword fouling / yhteensä: 13
viite: 2 / 13
Tekijä: | Baig, Mirza |
Työn nimi: | Steady state simulation model of vacuum distillation tower for operational use |
Julkaisutyyppi: | Diplomityö |
Julkaisuvuosi: | 2014 |
Sivut: | ix + 98 s. + liitt. 7 Kieli: eng |
Koulu/Laitos/Osasto: | Biotekniikan ja kemian tekniikan laitos |
Oppiaine: | Process Systems Engineering (KE3004) |
Valvoja: | Alopaeus, Ville |
Ohjaaja: | Tamminen, Esa ; Kulin, Mika |
Elektroninen julkaisu: | http://urn.fi/URN:NBN:fi:aalto-201412113208 |
OEVS: | Sähköinen arkistokappale on luettavissa Aalto Thesis Databasen kautta.
Ohje Digitaalisten opinnäytteiden lukeminen Aalto-yliopiston Harald Herlin -oppimiskeskuksen suljetussa verkossaOppimiskeskuksen suljetussa verkossa voi lukea sellaisia digitaalisia ja digitoituja opinnäytteitä, joille ei ole saatu julkaisulupaa avoimessa verkossa. Oppimiskeskuksen yhteystiedot ja aukioloajat: https://learningcentre.aalto.fi/fi/harald-herlin-oppimiskeskus/ Opinnäytteitä voi lukea Oppimiskeskuksen asiakaskoneilla, joita löytyy kaikista kerroksista.
Kirjautuminen asiakaskoneille
Opinnäytteen avaaminen
Opinnäytteen lukeminen
Opinnäytteen tulostus
|
Sijainti: | P1 Ark Aalto 2560 | Arkisto |
Avainsanat: | vacuum distillation tower buffer-cut region liquid entrainment fouling coking simulation model |
Tiivistelmä (eng): | The objective of this thesis is to develop a simulation model of vacuum distillation tower (DA-73001) to monitor the routine activities. Furthermore, the simulation model must illustrate the effect of liquid entrainment and buffer-cut wash bed performance on distillation efficiency. Vacuum distillation column internals, fouling and coking mechanism, VDU fouling and its mitigation have been discussed in the literature part. The formation of coke by decomposition of compounds at high heat flux regions in the furnace can be avoided by the increasing the steam rate in the furnace tube. The minimum liquid entrainment and improved vapor distribution to the wash bed can be achieved by installing a suitable feed inlet device in the flash zone. The wash oil reflux must be maintained above the minimum wetting rate of the packing to prevent wash beds from coking. The simulation model facilitates in the operations to ensure the operational parameter and product quality from the column has been maintained. To make the model convenient to be applicable in the operations, model user-interface on Microsoft Excel has been developed to make it accessible for the users unacquainted with the simulator interface. |
ED: | 2014-12-21 |
INSSI tietueen numero: 50217
+ lisää koriin
INSSI