haku: @keyword mobile robots / yhteensä: 6
viite: 4 / 6
Tekijä:Cabrera Garcia, Felix
Työn nimi:Immersive methods for long distance teleoperation with time delay
Julkaisutyyppi:Diplomityö
Julkaisuvuosi:2007
Sivut:67      Kieli:   eng
Koulu/Laitos/Osasto:Automaatio- ja systeemitekniikan osasto
Oppiaine:Automaatiotekniikka   (Aut-84)
Valvoja:Halme, Aarne ; Hyyppä, Kalevi
Ohjaaja:Saarinen, Jari
OEVS:
Sähköinen arkistokappale on luettavissa Aalto Thesis Databasen kautta.
Ohje

Digitaalisten opinnäytteiden lukeminen Aalto-yliopiston Harald Herlin -oppimiskeskuksen suljetussa verkossa

Oppimiskeskuksen suljetussa verkossa voi lukea sellaisia digitaalisia ja digitoituja opinnäytteitä, joille ei ole saatu julkaisulupaa avoimessa verkossa.

Oppimiskeskuksen yhteystiedot ja aukioloajat: https://learningcentre.aalto.fi/fi/harald-herlin-oppimiskeskus/

Opinnäytteitä voi lukea Oppimiskeskuksen asiakaskoneilla, joita löytyy kaikista kerroksista.

Kirjautuminen asiakaskoneille

  • Aalto-yliopistolaiset kirjautuvat asiakaskoneille Aalto-tunnuksella ja salasanalla.
  • Muut asiakkaat kirjautuvat asiakaskoneille yhteistunnuksilla.

Opinnäytteen avaaminen

  • Asiakaskoneiden työpöydältä löytyy kuvake:

    Aalto Thesis Database

  • Kuvaketta klikkaamalla pääset hakemaan ja avaamaan etsimäsi opinnäytteen Aaltodoc-tietokannasta. Opinnäytetiedosto löytyy klikkaamalla viitetietojen OEV- tai OEVS-kentän linkkiä.

Opinnäytteen lukeminen

  • Opinnäytettä voi lukea asiakaskoneen ruudulta tai sen voi tulostaa paperille.
  • Opinnäytetiedostoa ei voi tallentaa muistitikulle tai lähettää sähköpostilla.
  • Opinnäytetiedoston sisältöä ei voi kopioida.
  • Opinnäytetiedostoa ei voi muokata.

Opinnäytteen tulostus

  • Opinnäytteen voi tulostaa itselleen henkilökohtaiseen opiskelu- ja tutkimuskäyttöön.
  • Aalto-yliopiston opiskelijat ja henkilökunta voivat tulostaa mustavalkotulosteita Oppimiskeskuksen SecurePrint-laitteille, kun tietokoneelle kirjaudutaan omilla Aalto-tunnuksilla. Väritulostus on mahdollista asiakaspalvelupisteen tulostimelle u90203-psc3. Väritulostaminen on maksullista Aalto-yliopiston opiskelijoille ja henkilökunnalle.
  • Ulkopuoliset asiakkaat voivat tulostaa mustavalko- ja väritulosteita Oppimiskeskuksen asiakaspalvelupisteen tulostimelle u90203-psc3. Tulostaminen on maksullista.
Sijainti:P1 Ark Aalto  5133   | Arkisto
Avainsanat:planetary exploration
mobile robots
immersive teleoperation user interfaces
predictive motion displays
telepresence
Tiivistelmä (eng): The use of robotic assistance has become extremely important for many reasons.
To be remarked is the fact that a robot may provide us with access to remote sites and therefore a detailed knowledge on certain environments.
This information could be used to recreate and simulate specific scenarios on which astronauts may be afterwards trained, being this aspect of a vital importance in human exploration.
Another example would be the spacecraft landing.
It is a critical phase on which a tele-operated probe would give fundamental information for a future manned mission.
Just remark at this time the success of the ESA probe "Huygens" landing on Titan.
From the beginning of the entry on Titan until the batteries died only lasted for less than two hours, but the information gathered within this interval was proved to be of an incalculable value.
Due to all this, the development of reliable immersive teleoperation user interfaces is claimed to be one of the previous and more important milestones for any future space human exploration mission.

Space applications imply long distances, so time delays such that remote control may become unfeasible.
Predictive motion displays (PMD) stand as one of the possible solutions to overcome this constraint.
These displays show the movement of the simulated teleoperator without any time delay while the real teleoperator would simply follow the simulated one after the delay.
A further step is represented by the "Telepresence", in which the operator would be actually immersed into the remote site.
The telepresence is based on the provision of enough natural sensory information (images, voice, haptics...) so that the operator would feel as if located in the simulated scenario.
This field represents a fascinating subject, whose applications have been proved to be vital for the future of human space exploration.

Therefore, this thesis aims to build a teleoperated system that may be used to evaluate and quantify the effect of immersion and time delay on work performances.
A set of teleoperation tests will be developed in order to identify those tasks that may be improved with the assistance of telepresence.
The tests will also pursue to search the limits of the given schemes (direct teleoperation with time delay, with PMD and with telepresence) and will support both space and ground operations (capable of simulating different scenarios, e.g. teleoperation from a space station orbiting a planet, or from a stationary camp on Moon).
ED:2008-09-24
INSSI tietueen numero: 36305
+ lisää koriin
INSSI