haku: @keyword calibration / yhteensä: 64
viite: 3 / 64
| Tekijä: | Nguyen, Pham Huy |
| Työn nimi: | Development of high-performance radiometer calibration switch for millimetre waves |
| Julkaisutyyppi: | Diplomityö |
| Julkaisuvuosi: | 2016 |
| Sivut: | (10) + 69 Kieli: eng |
| Koulu/Laitos/Osasto: | Sähkötekniikan korkeakoulu |
| Oppiaine: | Radio Science and Engineering (ELEC 3038) |
| Valvoja: | Räisänen, Antti |
| Ohjaaja: | Lahtinen, Janne |
| Elektroninen julkaisu: | http://urn.fi/URN:NBN:fi:aalto-201611025258 |
| Sijainti: | P1 Ark Aalto 5047 | Arkisto |
| Avainsanat: | ferrite switch radiometer calibration higher order modes |
| Tiivistelmä (eng): | In microwave remote sensing radiometers, calibration switches are needed in the application of internal calibration references. Very low insertion loss is beneficial in view of low receiver noise and good radiometric resolution (ÎT). Low insertion loss can be achieved with ferrite junction switches. In developing millimetre wave ferrite junction switches, however, the small dimensions of the ferrite become a challenge. Targeting towards W band (89 GHz), two frequency-scaled switches at Ka band (36.5 GHz) have been developed and manufactured in the current work. One of the switches applies higher order mode operation, resulting in larger ferrite dimensions. A reference switch to apply dominant mode operation has been developed as well. Through the development of two Ka band ferrite switches, the feasibility of both dominant mode and higher order mode operation switches has been confirmed, and relatively good compliance between electromagnetic simulations and measurement results is observed. The switches have average insertion losses of 0.85 dB and 0.3 dB over 1.0 GHz and 4.7 GHz, respectively. |
| ED: | 2016-11-13 |
INSSI tietueen numero: 54793
+ lisää koriin
INSSI