search query: @author Vedenpää, Mikko / total: 1
reference: 1 / 1
« previous | next »
Author: | Vedenpää, Mikko |
Title: | Paperikoneen värähtelyn kustannusvaikutusten mittaaminen |
Measuring of cost effects of vibration in a paper machine | |
Publication type: | Master's thesis |
Publication year: | 2010 |
Pages: | 61 Language: fin |
Department/School: | Informaatio- ja luonnontieteiden tiedekunta |
Main subject: | Teollisuustalous (TU-22) |
Supervisor: | Juhanko, Jari |
Instructor: | Juhanko, Jari |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto | Archive |
Keywords: | TPN OEE paper machine vibration TPN OEE KNL paperikone värähtely |
Abstract (eng): | Vibrations in a paper machine are commonly recognized as serious problems in the process of papermaking. One way to avoid or lessen these problems is by investing on new technology in order to enable the paper mill to operate as smoothly as possible. Although the problem is recognized as being a substantial one, there is no clear knowledge on its magnitude. Therefore, in order to assess the profitability of investments on new technology, it is necessary to define a set of measurement tools, with which the cost effects of vibrations can be measured. The aim of this study is to produce such a set of measurement tools. The basis of this study rests on OEE-model (Overall Equipment Effectiveness), which in turn is based on TPM-philosophy (Total Productive Maintenance). In the OEE-model manufacturing efficiency is measured using three terms; availability (operating rate), performance rate and quality rate. Great improvement, compared to most calculations standards used in paper industry, is the inclusion of performance rate, which is typically neglected while concentrating on losses caused by lack of availability or poor quality rate. The lEE model is known in Finnish as KNL-model, the name of which derives from Finnish expression for the operating, performance and quality rates. Although the OEE-model is originally developed for use in electronics industry, it has been successfully utilized in measuring paper mill effectiveness. The main problem with measuring costs of vibrations is the difficulty of coupling problems with their causes. This study attempts to define the correct measurement system for connecting costs to their causes. As a result of this study, a new set of measurements named KNLvär was developed for measuring the cost effects of vibrations in papermaking process. In addition a set of requirements for measurement was given, which should help in connecting costs to their underlying causes. The set of measurements, as presented in this study, has not yet been implemented or tried out in practice, so the value and significance of the study remain unknown. There are, however, no clear hindrances preventing the trying of the measurement system defined in this study. Given that, at least a small-scale pilot-project utilizing the system given is recommended. |
Abstract (fin): | Paperikoneen värähtely tiedostetaan yleisesti merkittäväksi ongelmaksi paperinvalmistuksessa. Näistä häiriöistä pyritään eroon investoimalla uuteen tutkimukseen ja teknologiaan, jolla pyritään mahdollistamaan paperikonelinjan mahdollisimman häiriötön toiminta. Vaikka värähtelyongelman olemassaolo tiedostetaan, sen suuruudesta tai edes suuruusluokasta ei ole tarkkaa tietoa. Näin ollen, jotta voitaisiin arvioida paperinvalmistuksen kehittämiseen suunnatuiden investointien kannattavuus, on välttämätöntä kehittää mittaristo ja määritellä mittausmenetelmät, joilla värähtelyn kustannukset pystytään edes summittaisella tasolla laskemaan. Tässä työssä on pyritty kehittämään tarkoitukseen sopiva mittaristo. Työn pohjana on käytetty TPM-filosofiaan (Total Productive Maintenance) pohjautuvaa OEE-mallia (Overali Equipment Effectiveness), joka Suomessa tunnetaan KNL-mallina. Suomenkielinen lyhenne tulee mallissa laskettavan tehokkuuskertoimen osatekijöistä, jotka ovat Käytettävyys, Nopeus ja Laatu. Erityisesti nopeustermin käyttöönotto erottaa KNL-mallin muista paperiteollisuudessa tyypillisesti käytetyistä malleista joissa mittaristo yleisesti painottuu käytettävyys- ja laatuhävikkien arvioimiseen. Vaikka KNL-malli onkin alkujaan kehitetty etupäässä elektroniikkateollisuutta ajatellen, sitä on sovellettu menestyksekkäästi myös paperikoneen tuotantotehokkuuden mittaamisessa. Suurin ongelma värähtelykustannusten mittaamisessa on häiriöiden syiden kohdistamisen vaikeus. Tätä ongelmaa ratkaisemaan työssä määriteltiin KNLvär-mittaristo, jolla pyritään yhdistämään paperinvalmistuksessa tapahtuneet häiriöt ja katemenetykset nimenomaan värähtelyyn. Lisäksi esitettiin mitattaessa huomioitavia tekijöitä joiden avulla kustannuksia voidaan kohdentaa niiden alkusyihin. Esitettyä mittaristoa ei ole vielä käytännössä kokeiltu, joten työn tuloksen luotettavuutta on vaikea arvioida. Mitään ratkaisevaa estettä mittariston toimivuudelle ei ole kuitenkaan tullut ilmi, joten sen käyttöönotto ainakin pilottiluonteisessa projektissa lienee suositeltavaa. |
ED: | 2010-09-13 |
INSSI record number: 40762
+ add basket
« previous | next »
INSSI