search query: @keyword steel pipe coating / total: 1
reference: 1 / 1
« previous | next »
Author: | Leidén, Anders |
Title: | Mittalaite teräsputken pinnoitteen kiinnipysyvyyden testaamiseksi |
Device for measurement of peel strength of coating on steel pipes | |
Publication type: | Master's thesis |
Publication year: | 2010 |
Pages: | (6) + 56 Language: fin |
Department/School: | Koneenrakennustekniikan laitos |
Main subject: | Koneensuunnitteluoppi (Kon-41) |
Supervisor: | Juhanko, Jari |
Instructor: | Smått, Rauno |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 6810 | Archive |
Keywords: | steel pipe coating peel strength test teräsputken pinnoitus kiinnipysyvyyskoe |
Abstract (eng): | Steel pipelines that are built to transport crude oil or natural gas over long distances over land or sea are often protected from environmental degradation using multilayer plastic coatings. Pipes are coated in factories. Their ends are left uncoated to allow for welding and the weld seam and its surroundings are coated using a field joint. To ensure the quality of the coating, standards require peel strength tests to be done on the coating. The purpose of this thesis is to clarify standard requirements and practical issues regarding the peel strength test. On basis of the study a device for carrying out the test in different environments is designed. The device consists of measurement equipment and necessary hardware and software for storing test data and creating reports. These are reviewed in this thesis. The result is an important tool for quality control and method development in the industry. |
Abstract (fin): | Teräksiset putkilinjat joita käytetään siirtämään raakaöljyä tai maakaasua pitkiä matkoja maalla tai meressä suojataan ympäristön vaikutuksilta yleisesti useasta kerroksesta muodostuvalla muovipinnoitteella. Putket pinnoitetaan tehtaassa ja niiden päät jätetään pinnoittamatta kentällä tapahtuvaa hitsausta varten. Hitsaussauman ympäristö pinnoitetaan kenttäsaumalla asennustyömaalla. Pinnoitteen laadun varmistamiseksi standardeissa vaaditaan tehtäväksi pinnoitteen kiinnipysyvyyskoe. Tämän työn tavoite on selvittää standardien vaatimat menetelmät ja käytännön haasteet kiinnipysyvyyskokeen tekemisessä. Selvityksen perusteella työssä suunniteltiin laite, jonka avulla koe voidaan suorittaa eri ympäristöissä. Laite muodostuu mittalaitteesta sekä mittaustiedon tallentamiseen ja raporttien luomiseen tarvittavista laitteista ja ohjelmistoista, jotka selostetaan työssä. Työ tuotti tärkeän työkalun pinnoitteiden laadun varmennukseen sekä uusien menetelmien kehitykseen. |
ED: | 2010-10-22 |
INSSI record number: 41178
+ add basket
« previous | next »
INSSI