search query: @keyword centrifigural blower / total: 1
reference: 1 / 1
« previous | next »
Author: | Sonni, Niilo |
Title: | Päistään tuetun keskipakoispuhaltimen suunnittelu |
Designing of the centerhung structured centrifigural blower | |
Publication type: | Master's thesis |
Publication year: | 2010 |
Pages: | 87 + [3] Language: fin |
Department/School: | Insinööritieteiden ja arkkitehtuurin tiedekunta |
Main subject: | Koneensuunnitteluoppi (Kon-41) |
Supervisor: | Kuosmanen, Petri |
Instructor: | Majamäki, Olli |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 5980 | Archive |
Keywords: | centrifigural blower centerhung systematic method of product development keskipakoispuhallin centerhung-rakenne systemaattinen konstruktiosuunnittelu |
Abstract (eng): | Centrifugal blowers are used in several industrial processes. Operating conditions are challenging because of high temperatures, pressures and heavy dynamic forces on processes. The impeller, located either between the bearings or only on the other side, defines the fan performance. The first structure is called centerhung and the latter overhung. In this thesis a large-size centerhung industrial blower is designed. The centerhung structure gives a better tolerance for the rotor imbalance, compared to overhung structure, and therefore higher rotation speeds. The design requirements consisted of the specifications from API 673 standard published by the American Petroleum Institute (API) and of the blower manufacturer's own requirements. API 673 standard is commonly used for the blower design in the heavy industries. The manufacturer's most essential requirements were a gas-tight structure, restrictions in the blower geometry and the applicability to the product series. The design process followed the steps of the systematic method of the development guideline VDI 2222 in its applicable parts. Pro/ENGINEER 3D design program was greatly exploited to concretise alterative structural solutions and to analyse their properties, such as functionality, manufacturability, easy assembling and cost-effectiveness. As the final result of this thesis the centerhung structured centrifugal blower was designed fulfilling the requirements specified. Specific characteristics for this blower include one horizontal splitting plane and integrated hood and inlet box. These solutions provide remarkable advantages in improving gas tightness and reducing the distance between the bearings. Meanwhile the mounting and alignment of the blower structure and installing became easier and simpler. In this thesis, to achieve the final blower structure a large number of different solutions for the blower structure and components are presented, compared and selected. |
Abstract (fin): | Keskipakoispuhaltimia käytetään monissa teollisuuden prosesseissa. Prosessiolosuhteet ovat haasteelliset aggressiivisten väliaineiden, korkeiden lämpötilojen ja paineiden sekä suurten dynaamisten kuormitusten vuoksi. Puhaltimen suorituskyvyn määrittelevä siipipyörä on joko laakeroinnin välissä tai pelkästään toisella puolella. Edellistä rakennetta kutsutaan centerhung-rakenteeksi ja jälkimmäistä overhung-rakenteeksi. Tässä työssä suunniteltiin suurikokoinen, korkeita paineita tuottava centerhung-rakenteinen teollisuuspuhallin. Valitulla rakenteella saavutetaan overhung-rakennetta parempi roottorin epätasapainon sieto ja siten suurempia pyörimisnopeuksia. Tämä työ perustuu amerikkalaisen öljy- ja kaasuteollisuutta edustavan kauppajärjestön, American Petroleum Institute:n (API) julkaisemaan 673 -standardiin ja valmistajan omiin vaatimuksiin. API 673 -standardia käytetään yleisesti raskaan teollisuuden puhaltimille. Valmistajan omista vaatimuksista tärkeimmät olivat kaasutiiveys, valittujen puhallingeometrioiden rajoitukset ja soveltuvuus tuotesarjaan. Suunnitteluprosessi noudatti soveltuvin osin systemaattisen konstruktiosuunnittelumetodin VDI 2222 -ohjeistoa. Työssä hyödynnettiin Pro/ENG1NEER-mallinnusohjelmaa, jonka avulla konkretisoitiin eri ratkaisuja ja analysoitiin niiden toimivuutta valmistuksen, asentamisen ja teknillistaloudellisten kriteerien suhteen. Suunnitteluprosessin tuloksena kehitettiin etukäteen asetetut vaatimukset täyttävä, asiakkaan tilauksen mukaan räätälöitävissä oleva puhallinkonstruktio. Lopullisen konstruktion ominaispiirteitä ovat yksi vaakatasoinen jakotaso sekä integroitu kaapu ja imulaatikko. Näillä ratkaisuilla saavutetaan huomattavia etuja kaasutiiveyden varmistamisessa ja laakerivälin lyhentymisessä. Samalla puhallinkokoonpanon asentaminen yksinkertaistui ja perustukseen kiinnittäminen ja linjaaminen helpottuivat. Työssä on esitetty runsaasti erilaisia puhallinrakenteen ja -komponenttien ratkaisuvaihtoehtoja, niiden vertailua ja lopullisen kokoonpanorakenteen valintaa. |
ED: | 2010-10-29 |
INSSI record number: 41259
+ add basket
« previous | next »
INSSI