search query: @keyword abrasive wear / total: 1
reference: 1 / 1
« previous | next »
Author:Meskanen, Jukka
Title:Hiilipölypolttimen materiaalinvalinta
Material selection for pulverized coal burners
Publication type:Master's thesis
Publication year:2012
Pages:70 s. + liitt.      Language:   fin
Department/School:Koneenrakennustekniikan laitos
Main subject:Koneenrakennuksen materiaalitekniikka   (Kon-67)
Supervisor:Hänninen, Hannu
Instructor:Heinolainen, Antti
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto     | Archive
Keywords:coal power generation
pulverized coal
abrasive wear
erosive wear
creep-fatigue
corrosion
hiilivoima
hiilipöly
abraasiokuluminen
eroosiokuluminen
virumisväsyminen
korroosio
Abstract (eng): A significant amount of world's energy is produced by coal power generation.
The emission levels of already operational coal power plants can be diminished by improving the power plant's combustion technology.
The pulverized coal burners are exposed to high temperatures and aggressive fireside atmosphere.
In the power plants the operational reliability is emphasized, in general.
Therefore material selection for pulverized coal burners is the key issue in burner design.
This master thesis studied the material selection of pulverized coal burners.

The operational conditions of the burners are presented in the beginning of the thesis.
The pulverized coal is pneumatically transported to the boiler which causes erosive and abrasive wear of the component surfaces.
The fireside ends of the burners are exposed to temperatures above 1000°C and the aggressive fireside atmosphere.
These conditions degrade the lifetime of the burner components and component failures from different power plants are presented.

This thesis focused on the critical components of the burner in which the majority of component failures have occurred.
The high temperatures induce thermal and thermo mechanical stresses to the components next to the fireside causing fracture.
High temperature corrosion also contributes to component lifetime degradation.
The inner components of the burners show fractures in the wear resistant materials.
The theories related to these phenomena are presented in the thesis.

The component failures were analysed by Finite Element modelling.
The thermal loads for calculations were defined from temperature measurements from different power plants.
The results of the analyses and the component failures seen in power plants show that the primary causes for component failures is thermal shocks induced from altering boiler operating conditions.
The lifetime of the components can be improved by optimizing the material selection and the mechanical construction of the components.
As a result of the thesis suggestions for component material selection and mechanical construction are presented.
Abstract (fin):Merkittävä osuus maailman energiasta tuotetaan hiilivoimalla. Käytössä olevan hiilivoimakapasiteetin pienhiukkas- ja kasvihuonepäästöjä pyritään pienentämään voimalaitosten polttotekniikkaa kehittämällä. Hiilivoimalaitosten polttimet altistuvat korkeille lämpötiloille sekä aggressiiviselle polttoympäristölle. Voimalaitosten tulee olla käyttövarmoja, jolloin polttimien materiaalien valintojen merkitys korostuu. Tässä diplomityössä tutkittiin materiaalin valintoja hiilivoimalaitoksen polttimia varten.

Tutkimuksen alussa on esitetty hiilipolttimen käyttöolosuhteet voimalaitoksen käytön aikana. HUH poltetaan jauhetussa muodossa, pölynä, jonka pneumaattinen kuljetus aiheuttaa eroosio- ja abraasiokulumista virtauskanavan sisäpinnoilla. Polttimen tulipesän puoleinen pääty altistuu yli 1000 °C lämpötiloille ja aggressiiviselle polttoympäristölle. Käyttöolosuhteiden aiheuttamia vauriotapauksia on esitetty eri voimalaitoksilta.

Tutkimuksen painopiste oli hiilipolttimien kriittisissä komponenteissa käytössä havaittujen vaurioiden perusteella. Tulipesän puoleisissa komponenteissa esiintyy termisten ja termomekaanisten kuormitusten aiheuttamia murtumia sekä kaasuatmosfäärin aiheuttamaa korroosiota. Polttimien sisällä kulutusta kestävissä materiaaleissa esiintyy lämpötilavaihteluiden aiheuttamia murtumia. Tutkimuksen teoriaosuudessa on esitetty havaittuihin vauriotapauksiin liittyvä teoria.

Komponenttien vaurioita analysoitiin FEM-laskennalla. Analyysien lämpökuormat mallinnettiin voimalaitoksilta kerättyjen lämpötilamittaustulosten perusteella. Analyysien tuloksien ja käytössä havaittujen vaurioiden perusteella komponenttien primäärivaurioiden aiheuttajat ovat voimakkaat lämpötilagradientit, joita kattilan eri käyttöolosuhteissa esiintyy. Tutkimuksen lopputuloksena on esitetty parannusehdotuksia komponenttien materiaalinvalintaan sekä mekaaniseen rakenteeseen.
ED:2012-10-01
INSSI record number: 45310
+ add basket
« previous | next »
INSSI