search query: @keyword condebelt / total: 1
reference: 1 / 1
« previous | next »
Author: | Castrén, Sakari |
Title: | ED-kuivaajan toiminnan optimointi viilun laadun kannalta |
Optimization of the ED-dryer in the point of view of veneer quality | |
Publication type: | Master's thesis |
Publication year: | 2013 |
Pages: | 64 s. + liitt. 15 Language: fin |
Department/School: | Puunjalostustekniikan laitos |
Main subject: | Puutekniikka (Puu-28) |
Supervisor: | Kairi, Matti |
Instructor: | Paajanen, Olli |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 2358 | Archive |
Keywords: | contact drying condebelt optimization veneer drying kontaktikuivaus optimointi viilu kuivaus |
Abstract (eng): | Condebelt drying is a drying technology that stems from the paper industry. It utilizes both a hot contact plate and a vacuum to dry cardboard. The ED-dryer used in this study utilizes the same principle as the condebelt-technology. Because this project has moved from the laboratory phase into the pilot phase, some difficulties have been encountered due to this change in scale. This study focuses on solving these difficulties and optimization of the ED-dryer. The goal of this study was to find the functioning parameters of the ED-dryer needed to produce quality veneer. This study focuses on the finding and adjusting of those parameters. The most crucial parameters being drying time and temperature. With the adjusting of these parameters it was sought to produce dried veneer with low and even moisture content. The change in scale from a laboratory one to a pilot one caused unexpected changes especially in the adjusting of the drying temperature. In the end however optimal drying parameters were discovered that led to an even and low moisture content in the dried veneer. Other functioning parameters were also optimized in a way that allowed the ED-dryer to dry quality veneer efficiently. |
Abstract (fin): | Condebelt-kuivaus on paperiteollisuudesta peräisin oleva kartongin kuivausmenetelmä, joka hyödyntää kontaktikuivausta ja alipainetta. Tämän työn keskeisessä osassa on ED-kuivaaja, joka toimii tämän condebelt-teknologian pohjalta. Koska kyseinen hanke on siirtynyt laboratoriovaiheesta pilottivaiheeseen, seuraa tästä mittakaavanmuutoksesta odottamattomia hankaluuksia. Tässä työssä keskityttiin näiden ongelmakohtien ratkaisuun ja ED-kuivaajan toiminnan optimointiin. Työn tavoitteena oli selvittää ED-kuivaajan toimintaa ohjaavat parametrit viilun laadun kannalta. Työssä keskityttiin kuivaajan toimintoihin ja niiden säätöihin. Olennaisimmat toiminnot viilun laadun kannalta oli tasainen kuivauslämpötila, sekä kuivausaika. Näitä parametreja optimoimalla pyrittiin saamaan kuivattavaan viiluun tasaiseen ja alhainen loppukosteus. Mittakaavanmuutos laboratoriovaiheesta pilottivaiheeseen aiheutti odottamattomia muutoksia etenkin lämpötilan säädön osalta. ED-kuivaajan käyttöparametrit saatiin kuitenkin optimoitua viilun laadun kannalta siten, että viilun loppukosteus oli alhainen ja tasainen. Myös muut käyttöparametrit saatiin optimoitua, jotta ED-kuivaajalla olisi mahdollista kuivata tehokkaasti laadukasta viilua. |
ED: | 2013-04-24 |
INSSI record number: 46125
+ add basket
« previous | next »
INSSI