search query: @keyword corrosiometer / total: 1
reference: 1 / 1
« previous | next »
Author: | Joutti, Marianne |
Title: | Corrosion sensors for measuring industrial electronics lifetime |
Korroosioanturi teollisuuselektroniikan eliniän määritykseen | |
Publication type: | Master's thesis |
Publication year: | 2014 |
Pages: | 65 s. + liitt. 5 Language: eng |
Department/School: | Materiaalitekniikan laitos |
Main subject: | Soveltava materiaalitiede (MT3001) |
Supervisor: | Franssila, Sami |
Instructor: | Kohvakka, Mikko |
Electronic version URL: | http://urn.fi/URN:NBN:fi:aalto-201404161671 |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 1871 | Archive |
Keywords: | PCB corrosion of electronics GR-63-Core corrosiometer piirikortti elektroniikan korroosio korroosioanturi |
Abstract (eng): | The purpose of this Master's Thesis was to find and test a sensor for Printer Circuit Board (PCB) corrosion monitoring and life cycle estimations. Commercial options and sensor structures presented in literature were inspected, but none of them could meet the demands for low price and spacing demands. Therefore, a novel corrosiometer was needed to be designed and tested. The corrosiometer presented in this Master's Thesis can be manufactured by same processes and materials as the PCB itself. Therefore, it does not raise manufacturing costs and it has the same production quality as the PCB itself. This sensor was tested in an artificial corrosion test called "GR-63-Core". This corrosiometer measures resistance change inside sensor copper patterns. It consists of two copper trace patterns, one of which measures insulation resistance of a PCB and the other measures the aging of copper traces. Four material combinations were tested: bare copper, immersion tin, solder resist and conformal coating coated copper traces. This sensor is meant to be used as a pair, in which the other sensor is made of corroding material and the other has been coated with corrosion preventive coating, and it works as reference sensor. Together with these patterns also typical PCB components were inserted in the sensor plate to simulate corrosion aging on PCB. These components were plated through holes, quad flat packages and resistors in serial of parallel connection patterns. The results of experimental tests pointed out, that corrosiometer presented in this Master's Thesis works. It can used both for life-cycle analysis and condition monitoring of PCB. The best material combinations for corroding sensor was found to be bare copper and for reference sensor solder resist or conformal coated sensor. |
Abstract (fin): | Tämän diplomityön tarkoituksena oli löytää ja testata korroosioanturi piirikortin kunnonval-vontaan ja eliniänseurantaan. Kaupallisia ja kirjallisuudesta löytyviä anturimalleja tutkittiin, mutta mikään näistä vaihtoehdoista ei täyttänyt anturin alhaista tilavaatimusta ja riittävän matalaa hintaa. Tämän takia uusi anturi piti suunnitella ja testata. Tässä diplomityössä esitelty anturi voidaan valmistaa samoilla materiaaleilla ja menetelmillä kuin itse piirikortti. Täten se ei nosta valmistuskustannuksia ja sillä on sama tuotantolaatu kuin piirikortilla. Tämä anturi testattiin laboratoriossa tehdyllä korroosiotestillä, joka nou-datti standardia "GR-63-Core". Tämä anturi mittaa resistanssin muutosta anturiin kuuluvilla kuparivedoilla. Anturi koostu kahdesta erillisestä kuparivetokuviosta, joista toinen mittaa johdin- ja toinen eristysresistanssia. Anturin materiaalivaihtoehtoina käytettiin paljasta ku-paria sekä tinalla, juotteenestopinnoitteella tai lakalla päällystettyä kuparia. Tätä anturia on tarkoitus käyttää pareittain siten, että toinen antureista on valmistettu korrodoituvasta mate-riaalista ja toinen kuvio toimii samanaikaisesti referenssianturina. Tämä referenssianturi on päällystetty korroosion estävällä pinnoitteella. Näiden anturi kuvioiden lisäksi testikortille lisättiin elektronia komponentteja simuloimaan piirikortin komponenttien ikääntymistä. Tässä diplomityössä esitettyjen tulosten mukaan testattava anturi toimii ja se sopii sekä elin-ikämäärityksiin että piirikortin kunnonvalvontaan. Parhaiten korrodoituvan anturin materi-aaliksi sopii testitulosten mukaan paljas kupari ja referenssianturille taas juotteenestopinnoi-tettu tai lakattu kupari. |
ED: | 2014-04-20 |
INSSI record number: 48905
+ add basket
« previous | next »
INSSI