search query: @keyword Taguchi / total: 11
reference: 1 / 11
« previous | next »
Author:Lempiäinen, Petteri
Title:Porttaalirobotin tarkkuuden tutkiminen Taguchi -menetelmän avulla
Study of pose repeatability of portal robot with the means of Taguchi method
Publication type:Master's thesis
Publication year:2010
Pages:44 + liitt. 26      Language:   fin
Department/School:Koneenrakennustekniikan laitos
Main subject:Auto- ja työkonetekniikka   (Kon-16)
Supervisor:Juhala, Matti
Instructor:Kerosuo, Pekka
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  3983   | Archive
Keywords:portal robot
Taguchi
pose repeatability
porttaalirobotti
Taguchi
toistotarkkuus
Abstract (eng): Portal robots are automation equipments belonging to industrial robots of which the movements take place in linear coordinates.
Portal robots are mainly used to transport products from workstation to another.
The accuracy of portal robot is a fundamental requirement for the operation of a system.

Erikkilä Nostotekniikkaa Oy (Ltd) is first and foremost a crane manufacturer but also a manufacturer of portal robots based on crane technology.
Any measured data on the accuracy of robots manufactured by the company did not exist.
The purpose of this thesis was to investigate the impact of different components on the accuracy of robotic cranes of Erikkilä Nostotekniikkaa Oy.

The objective of this thesis was to find that combination of components, which can cost-effectively optimize the accuracy of a modular portal robot based on light crane system to less than ±1 mm pose repeatability.
The objective was also to prove that less than ±1 mm accuracy is achievable with light crane system linear profiles.

The thesis was carried out as case-study.
A portal robot made of light crane system modules was manufactured and definition with different combinations of components was investigated. 3D forward section in space (EPLA) method was used to measure different combinations of components and over 5280 coordinate positions were measured.

With the help of Taguchi -method it was possible to examine a large number of component combinations in a reasonable number of experiments.
Measuring results were analyzed by using Taguchi signal/noise -ratio and orthogonal matrices.
At the same time application of the Taguchi -method as an industrial engineering design tool was learned.

As a result of this study the optimal combination of components was discovered and better understanding of the impact of different components to the accuracy was gained.
As a result of this thesis new development targets were found and their study was started.
Abstract (fin): Porttaalirobotit ovat teollisuusrobotteihin kuuluvia automaatiolaitteita, joissa liikkeet tapahtuvat lineaarikoordinaatistossa.
Porttaalirobotteja käytetään pääasiassa tuotteiden siirtoon työpisteestä toiseen.
Porttaalirobotin tarkkuus on laitteiston toiminnan perusvaatimus.

Erikkilä Nostotekniikkaa Oy on ennen kaikkea nosturivalmistaja, mutta myös nosturitekniikkaan perustuvien porttaalirobottien valmistaja.
Mitattua tietoa yrityksen valmistamien robottien tarkkuudesta ei ollut olemassa.
Diplomityön tarkoituksena oli tutkia eri komponenttien vaikutusta Erikkilä Nostotekniikkaa Oy:n robottinostureiden tarkkuuteen.

Työn tavoitteena oli löytää komponenttiyhdistelmä, jolla voidaan optimoida piennosturijärjestelmään perustuvan modulaarisen porttaalirobotin tarkkuus alle ± 1 mm toistotarkkuuteen kustannustehokkaasti.
Tavoitteena oli myös osoittaa, että alle ±1 mm toistotarkkuus on saavutettavissa piennosturijärjestelmän lineaariprofiileilla.

Työ toteutettiin case-tutkimuksena, jossa valmistettiin porttaalirobotti piennosturijärjestelmän moduleista ja tutkittiin sen toistotarkkuus erilaisilla komponenttiyhdistelmillä.
Eri komponenttiyhdistelmillä suoritettiin 3D-mittaukset eteenpäinleikkaus avaruudessa (EPLA)-menetelmällä ja mitattiin kaiken kaikkiaan 5280 koordinaattipistettä.

Taguchi-menetelmää hyödyntäen pystyttiin tutkimaan suuri joukko komponenttiyhdistelmiä kohtuullisella määrällä kokeita.
Mittaustulokset analysoitiin Taguchin signaali-kohinasuhdetta ja ortogonaalimatriisia hyödyntämällä.
Samalla opittiin soveltamaan Taguchi- menetelmää teollisen koesuunnittelun työkaluna.

Työn tuloksena löydettiin optimikokoonpano ja opittiin ymmärtämään paremmin eri komponenttien vaikutuksesta tarkkuuteen.
Työn tuloksena löydettiin kehityskohteita ja aloitettiin niiden tutkiminen.
ED:2010-10-22
INSSI record number: 41179
+ add basket
« previous | next »
INSSI