search query: @keyword preventive maintenance / total: 11
reference: 6 / 11
« previous | next »
Author:Myllymäki, Kristian
Title:Vaahdotusmekanismin ennakoiva kunnonvalvonta
Preventive maintenance of the flotation mechanism
Publication type:Master's thesis
Publication year:2010
Pages:(5) + 53      Language:   fin
Department/School:Koneenrakennustekniikan laitos
Main subject:Koneensuunnitteluoppi   (Kon-41)
Supervisor:Kuosmanen, Petri
Instructor:Rinne, Antti
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  4716   | Archive
Keywords:preventive maintenance
stator
flotation
ennakoiva kunnonvalvonta
staattori
vaahdotus
Abstract (eng): Froth flotation is one of the ore concentration methods used in concentrators.
Process wise the flotation locates in flow sheet after grinding.
The concentrate produced with froth flotation will be dried and transported to intermediate storage or to smelter.

In this thesis it was surveyed the measuring methods which could be used in measuring the abrasion of the stator of flotation mechanism.
The stator is located on the bottom of the flotation cells.
Due to the stator location it is exposed to erosion caused by slurry jet.
In addition, there are also flotation chemicals, which will increase the demands in point of view measuring and data transfer.

The thesis was divided in three sections.
In the literature survey it is dealt with the potential options of the measuring methods.
Due to large number of the options VTT was asked to prepare the preliminary study about the methods.
Based on the preliminary study the number of possible methods was decreased to eleven.
Then by using different product development methods eight options were eliminated.
Finally there were three measuring methods.
Prototypes of each of three methods were built and installed to flotation cell for testing.

During the prototype building a lot of important information concerning the structural challenges was gathered.
The most significant discovery was uncertainty related to connection points and data transfer.
The components which are moulded are thus on safe from slurry jet.
Based on the trial assemblies the critical point will be abrasion resistance of the data transfer cable.

The measuring information presented in this thesis gives guidelines for selection of the measuring method in the future.
There are still some needs with manufacturing development to be done with presented methods.
Anyway, the method for measuring abrasion of the lining was found.
Abstract (fin): Malmien rikastamisessa eräs menetelmä on vaahdotuskennoissa suoritettava vaahdotus.
Vaahdotus sijaitsee rikastuspiirissä jauhatuksen jälkeen.
Vaahdotuksessa saatu rikaste kuivataan ja kuljetetaan joko välivarastoon tai sulattoon.

Tässä diplomityössä tutkittiin mittausmenetelmiä, joilla saataisiin mitattua vaahdotusmekanismin staattorin lavan pinnoitteen kulumista.
Staattori sijaitsee vaahdotuskennon pohjalla ja altistuu roottorin aiheuttamalle, eroosiokuluttavalle lietevirtaukselle.
Kulumisen lisäksi kennossa vaahdotuksessa käytetään syövyttäviä kemikaaleja, jotka osaltaan lisäävät ympäristön vaativuutta mittauksen ja tiedonsiirron näkökulmasta.

Työ jakautui kolmeen osaan.
Kirjallisuusselvityksessä käsitellään potentiaalisia mittausmenetelmävaihtoehtoja.
Vaihtoehtojen suuresta lukumäärästä johtuen pyydettiin VTT:tä tekemään esiselvitys mittausmenetelmien toimivuudesta.
Esiselvityksen perusteella menetelmien lukumäärä saatiin supistettua yhteentoista.
Näistä menetelmistä karsittiin erilaisin arviointiperustein vielä kahdeksan pois päätyen kolmeen menetelmävaihtoehtoon.
Kustakin kolmesta menetelmästä rakennettiin prototyyppi ja asennettiin vaahdotuskennoon testattavaksi.

Prototyyppien rakentamisessa saatiin tärkeää tietoa eri mittausmenetelmiin liittyvistä rakenteellisista haasteista.
Merkittävä havainto oli se, miten monta epävarmuustekijää liittyy liitoskohtiin ja tiedon siirtämiseen.
Lavan sisällä olevat komponentit ovat suojassa lietevirtaukselta, mutta tiedonsiirtokaapelin kestävyys on koeasennuksen kriittisin kohta.

Työssä esitetty mittausmenetelmätieto antaa suuntaviivoja mittausmenetelmän valintaan tulevaisuudessa.
Esitetyissä menetelmissä on valmistusteknisesti vielä kehitettävää, mutta työn tavoitteena ollut toimiva mittausmenetelmä löytyi.
ED:2010-10-25
INSSI record number: 41198
+ add basket
« previous | next »
INSSI