search query: @keyword nickel / total: 11
reference: 6 / 11
Author: | Toivanen, Vera |
Title: | Tarkkailusuunnitelma Porvoon jalostamoalueen ilman hiukkaspitoisuuksien selvittämiseksi |
Monitoring plan for investigating particulate matter emissions in the Porvoo refinery region | |
Publication type: | Master's thesis |
Publication year: | 2012 |
Pages: | ix + 98 + [11] Language: fin |
Department/School: | Biotekniikan ja kemian tekniikan laitos |
Main subject: | Teknillinen kemia (Kem-40) |
Supervisor: | Lehtonen, Juha |
Instructor: | Westerholm, Henrik |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 2074 | Archive |
Keywords: | particulate matter nickel monitoring oil refinery hiukkaset nikkeli tarkkailu öljynjalostamo |
Abstract (eng): | This thesis is based on Neste Oil Corporation's environmental permit decision 81. It requires to examine the effects of Porvoo refinery's particulate matter and nickel emissions on the air quality in the region. The duration of the measurements is required to be three months and they should be performed at two measurement points. Components to be measured are total suspended particles (TSP), inhalable particles (PM10), fine particles (PM2,5) and nickel (Ni). The purpose of this work was to prepare a monitoring plan according to which the survey is carried out. During the thesis work, related literature was studied in the form of various reports and studies as well as the laws and standards. Information about the characteristics and sources of particulate matter as well as impacts of particulate matter to the health, environment and climate were collected. In addition, the behaviour of particulates in the atmosphere was examined. An important part of the work was to study a variety of particulate matter measurement equipment and assess their suitability for this type of survey. The monitoring plan was prepared on the basis of the data collected from the literature. Both the environmental permit decision and air quality regulations were taken into account while preparing the monitoring plan. The plan sets out a description of the implementation of monitoring (measurement points, measurement method and timing) and interpretation of the results. Also the uncertainties of the measurements have been investigated. The measurements will be carried out between May and August 2012. TSP, PM10 and PM2,5 measurements will be done continuously using automatic equipment. Nickel is determined every day from manually collected PM10 sample. |
Abstract (fin): | Tämän diplomityön taustalla on Neste Oil Oyj:n ympäristölupapäätöksen lupamääräys 81, joka velvoittaa selvittämään kertaluonteisesti Porvoon jalostamon aiheuttamien hiukkas- ja nikkelipäästöjen vaikutukset alueen ilmanlaatuun. Määräyksen velvoittamien mittausten keston tulee olla kolme kuukautta ja mittaukset tulee suorittaa kahdessa mittauspaikassa. Mitattavat suureet ovat kokonaisleijuma (TSP), hengitettävät hiukkaset (PM10), pienhiukkaset (PM2,5) ja nikkeli (Ni). Tämän työn tarkoituksena oli laatia ELY-keskukselle esitettävä tarkkailusuunnitelma, jonka mukaisesti lupamääräyksen mukainen selvitys toteutetaan. Työssä perehdyttiin aiheeseen liittyvään kirjallisuuteen, erilaisten raporttien ja tutkimusten sekä lainsäädännön ja standardien muodossa. Työhön koottiin tietoa hiukkaspäästöjen ominaisuuksista, hiukkaslähteistä sekä hiukkasten aiheuttamista terveys-, ympäristö- ja ilmastovaikutuksista. Lisäksi tarkasteltiin hiukkasten käyttäytymistä ilmakehässä. Tärkeänä osana työtä oli selvittää erilaisia hiukkasmittausmenetelmiä ja arvioida niiden soveltuvuutta ko. hiukkasselvitykseen. Tarkkailusuunnitelman laadinnassa noudatettiin lupamääräyksen ehtoja sekä ilmanlaatuasetuksen säädöksiä. Suunnitelmassa esitetään kuvaus vaikutustarkkailun toteutuksesta (mittauspaikat, mittausmenetelmät, ajankohta) ja tulosten tulkinnasta. Lisäksi suunnitelmassa on kartoitettu mittauksia koskevat epävarmuuslähteet. Tarkkailusuunnitelma on esitetty kokonaisuudessaan tämän työn liitteenä. Mittaukset on määrä suorittaa touko-elokuussa 2012. TSP, PM10 ja PM2,5 mittaukset tehdään jatkuvatoimisilla automaattisilla mittalaitteilla. Nikkeli määritetään laboratoriossa manuaalisesti kerätystä PM10 -fraktiosta. i |
ED: | 2012-05-24 |
INSSI record number: 44636
+ add basket
INSSI