search query: @keyword modeling / total: 119
reference: 18 / 119
Author: | Kivivuori, Jaakko |
Title: | Optinen emissiospektrometria (OES-PDA) teräksen sulkeumien mittauksessa |
Characterization of steel inclusions using OES-PDA-method | |
Publication type: | Master's thesis |
Publication year: | 2014 |
Pages: | iv + 95 s. + liitt. 1 Language: fin |
Department/School: | Materiaalitekniikan laitos |
Main subject: | Materiaalien valmistus (MT302-3) |
Supervisor: | Louhenkilpi, Seppo |
Instructor: | Oksman, Pilvi |
Electronic version URL: | http://urn.fi/URN:NBN:fi:aalto-201412123223 |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 2576 | Archive |
Keywords: | steel inclusion thermodynamical model modeling teräs sulkeuma OES-PDA termodynaaminen malli mallintaminen |
Abstract (eng): | Nowadays, the quality of steel products has to be excellent. The products should have correct strength, ductility and machinability properties. One of the facts affecting the quality prop-erties is inclusions in steel. Most important factors when producing steel owing as good mechani-cal properties as possible are composition, amount, size and shape of the inclusions. Several methods can be used when analyzing the composition of inclusions. One of those methods is OES-PDA method. When using this method the complete analysis of elements and inclusions can be measured. Nowadays, OES-PDA-method can be used only for analyzing inclusion structure at room temperature. Analyzing inclusion structures at process temperature, more than 1500 °C, is not possible with traditional OES-PDA method. For this reason the OES-PDA method needs a sep-arate thermodynamical model to enable modeling the inclusion structures at process temperature. In this study both literature and experimental parts are presented. Steel making processing, origi-nating mechanism of inclusions and the principles of OES-PDA method are presented in the litera-ture part. In experimental part the modeling of the inclusions compositions at process tempera-ture condition is investigated by using OES-PDA method. The aim of this work is to create a thermodynamical model which could predict the inclusion structures at high process temperatures. On the basis of the results obtained in this work should be considered that OES-PDA-method can be utilized as an analyzing method both room temperature and at process temperatures. Developing of the thermodynamical model aimed in this work was satisfied. Also the unclear correlation between oxygen content and the amount of inclusions has been solved during this work. |
Abstract (fin): | Nykyään terästuotteilta vaaditaan paljon. Tuotteilla tulee olla muun muassa oikeanlaiset lujuus-, sitkeys- ja työstettävyysominaisuudet. Eräs näistä teräksen laatuominaisuuksiin vaikuttavista seikoista on sen sisältämät sulkeumat. Sulkeumien koostumus, koko, määrä ja muoto ovatkin tärkeitä tekijöitä, kun halutaan tuottaa mahdollisimman hyvät mekaaniset ominaisuudet omaavaa terästä. Sulkeumien koostumusta pystytään tarkastelemaan useilla menetelmillä, yksi näistä menetelmistä on OES-PDA-menetelmä. Sen avulla teräksestä saadaan täysi alkuaineanalyysi ja sulkeumien koko- sekä koostumusanalyysi. Tällä hetkellä OES-PDA-menetelmän ongelmana on se, että sillä saadut tulokset kertovat sulkeumarakenteista ainoastaan huoneenlämpötilassa, eikä itse prosessilämpötilassa. Tämän takia OES-PDA-menetelmä tarvitsee avukseen termodynaamisen mallin, jolla voidaan mallintaa sulkeumarakennetta myös prosessilämpötiloissa. Tämä tutkimus koostuu kirjallisuusselvityksestä ja kokeellisesta osasta. Kirjallisuusosassa tarkastellaan terästen valmistusta, sulkeumien syntymekanismeja ja OES-PDA-menetelmän periaatteet. Työn kokeellisessa osassa tarkastellaan, miten OES-PDA-menetelmällä saatua raakadataa voidaan käyttää avuksi mallinnettaessa sulkeumakoostumuksia prosessilämpötiloissa. Tarkoituksena on tehdä termodynaaminen malli, jolla sulkeumarakenteita voidaan selvittää myös prosessilämpötiloissa. Työssä saatujen tulosten perusteella voidaan todeta, että OES-PDA-menetelmää voidaan hyödyntää sulkeumien analyysimenetelmänä sekä huoneenlämmössä että prosessilämpötiloissa. Työn tavoitteena olleen termodynaamisen mallin kehittäminen onnistuttiin saavuttamaan. Myös epäilyksen alla olleen happipitoisuuden korrelaatio sulkeumien määrään selviää työstä. |
ED: | 2014-12-21 |
INSSI record number: 50231
+ add basket
INSSI