search query: @keyword test / total: 12
reference: 5 / 12
« previous | next »
Author:Turkia, Ville
Title:Lujitemuovilaminaattien ohutpinnoitteet
Thin coatings on reinforced plastic laminates
Publication type:Master's thesis
Publication year:2010
Pages:ix + 90 s. + liitt. 6      Language:   fin
Department/School:Sovelletun mekaniikan laitos
Main subject:Lentotekniikka   (Kul-34)
Supervisor:Saarela, Olli
Instructor:Brander, Timo
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  4274   | Archive
Keywords:reinforced plastic
composite
wear
thin coating
thermal spray
test
erosion
lujitemuovi
komposiitti
kuluminen
ohut
pinnoitus
terminen ruiskutus
testaus
eroosio
Abstract (eng): Reinforced plastics have an excellent weight to strength ratio but their wear resistance is quite poor.
With the help of an appropriate coating, the wear could be decreased.
In literature part of this thesis different kinds of coatings, their manufacturing and test methods are reviewed.
In addition, some practical examples on coating of reinforced plastics are presented.
The coatings under consideration were metals, ceramics or corresponding materials.
In experimental part of this thesis hard metal and ceramic coatings on glass and carbon fiber reinforced plastic laminates were tested.

The experimental coatings were manufactured by using thermal plasma and arc spray.
To be able to achieve a good adhesion between the laminate and the coating in thermal spraying the use of a bond layer is required.
A thin steel wire mesh was used as the bond layer but this concept failed during the coating process due to poor adhesion to the laminate.
Thus, the coatings had to be deposited on the resin layer on top of the wire mesh.
The varying quality of the resin and bare spots on the wire mesh caused some problems.
With additional bond layers in between, the coatings turned out to be satisfactory on some of the laminates.

The test results showed the coatings to be satisfactory in quality and adhesion but insufficient for structural applications.
The erosion wear resistance of the laminates did not increase significantly when coated.
For future studies, the use of different type of metal mesh or deposition of gradient epoxy-particle bond layer was recommended.
Abstract (fin): Lujitemuovit ovat painoonsa nähden erinomaisia kuormaa kantavissa rakenteissa, mutta niiden pinta on herkkä kulumiselle.
Sopivalla pinnoitteella kulumista voidaan hidastaa.
Tässä työssä esitellään ensin kirjallisuuskatsauksen muodossa eri pinnoitteita, niille soveltuvia valmistus- ja testausmenetelmiä sekä käytännön esimerkkejä maailmalla tehtyihin pinnoitetutkimuksiin viitaten.
Asioita tarkastellaan erityisesti lujitemuovien asettamat rajoitukset huomioiden.
Pinnoitteina ovat metallit, keraamit tai vastaavat materiaalit.
Lopuksi tutkitaan kokeellisesti, miten kova metallipinnoite ja keraamipinnoite soveltuvat lasi- ja hiilikuitulaminaatin pinnalla käytettäviksi.

Kokeellisessa osuudessa pinnoitteet valmistettiin termisellä plasma- ja valokaariruiskutuksella.
Tällöin laminaatin pinnan ja pinnoitteen välissä tulee käyttää sidoskerrosta riittävän tartunnan aikaansaamiseksi.
Sidoskerrokseksi valittiin ohut haponkestävä teräsverkko, joka ei kuitenkaan toiminut, koska verkko irtoili pinnoituksen aikana.
Tämän seurauksena pinnoitteet jouduttiin tekemään verkon päällä olevan hartsikerroksen päälle.
Ongelmia aiheuttivat hartsikerroksen vaihteleva laatu ja paljaat kohdat verkossa.
Ylimääräisiä tartuntakerroksia käyttämällä pinnoitteet saatiin lopulta valmistettua tyydyttävästi osalle laminaateista.

Tehtyjen testien perusteella pinnoitteiden tartunta laminaattien pintaan oli tyydyttävällä tasolla, mutta riittämätön vaativiin rakenteellisiin käyttötarkoituksiin.
Pinnoitteet eivät myöskään lisänneet laminaattien eroosiokulumisen kestoa merkittävästi.
Jatkossa ehdotetaan tutkittavaksi muun muassa erilaisen verkon tai gradienttisen epoksi-partikkeli -sidoskerrosratkaisun käyttöä.
ED:2010-03-19
INSSI record number: 39326
+ add basket
« previous | next »
INSSI