search query: @keyword transmitter / total: 12
reference: 4 / 12
« previous | next »
Author:Lemberg, Jerry
Title:An Upconverting Digital-to-Analog Converter
Ylössekoittava digitaali-analogiamuunnin
Publication type:Master's thesis
Publication year:2013
Pages:ix + 62      Language:   eng
Department/School:Sähkötekniikan korkeakoulu
Main subject:Elektroniikka ja sovellukset   (S3007)
Supervisor:Ryynänen, Jussi
Instructor:Stadius, Kari
Electronic version URL: http://urn.fi/URN:NBN:fi:aalto-201401101102
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  1096   | Archive
Keywords:transmitter
up-conversion
D/A converter
RF-DAC
timing error
lähetin
ylössekoitus
D/A muunnin
ajoitusvirhe
Abstract (eng):This masters thesis was part of a research project where the target was to design a cellular transmitter for LTE.
The research was conducted with Enrico Roverato.
Enrico's thesis holds the details of system level design and the design of the digital front-end.
A part of the digital front-end is a noise shaper, which decreases receiver band noise levels to the extent where SAW-filters are no longer required.
The essential part of this thesis is the design of a segmented 10-bit radio-frequency digital-to-analog converter (RF-DAC).
When a traditional direct-conversion transmitter is replaced with an RF-DAC, several problems related to analog circuit design can be avoided as nearly all signal processing is performed digitally.
Our transmitter requires only one digital-to-analog converter, thus our approach does not suffer from typical amplitude and phase discrepancies between converters.
The challenges in the chosen transmitter architecture culminate to amplitude and timing errors in the output stage.
It is also shown in this work how linearity requirements set by the noise shaper are extremely difficult to meet with the chosen transmitter architecture, as timing errors in the high sample-rate digital-to-analog converter generate unacceptable amount of distortion.The transmitter demonstrated in this work is able to up-convert two 10-bit 20 MHz digitally shaped baseband signals on 2 GHz frequency with 10 dBm output power while consuming only 165 mW.
Abstract (fin):Tämä diplomityö tehtiin osana tutkimusprojektia, jossa tarkoituksena oli suunnitella lähetinpiiri LTE radioverkoille.
Tutkimustyö on tehty yhdessä Enrico Roveraton kanssa, jonka diplomityössä kuvataan projektin syysteemitason suunnittelu, sekä digitaalisen esiasteen toteutus.
Osana digitaalista esiastetta on kohinanmuokkain, jolla pyritään madaltamaan vastaanottimen kaistan kohinatasoa jottei SAW-suodattimia tarvita.
Tämän työn keskeisin osa on suoraan kantoaallolle ylössekoittavan 10-bittisen segmentoidun digitaali-analogiamuuntimen (RF-DAC) suunnittelu.
Muuntimella vältetään suuri osa tavanomaista suoramuunnoslähetintä vaivaavista analogisen signaalinkäsittelyn ongelmista korvaamalla perinteiset analogiset operaatiot digitaalisilla vastineillaan.
Suunnitellussa lähettimessä tarvitaan vain yksi digitaali-analogiamuunnin, jolloin tyypillisesti kahden muuntimen välillä olevat amplitudi-, ja vaiheongelmat voidaan välttää.
Valitun lähetinarkkitehtuurin ongelmat kulminoituvatkin lähtöasteen amplitudi-, ja ajoitusvirheisiin.
Työssä esitetään myös miten kohinanmuokkaimen vaatima lineaarisuus on kuitenkin hyvin haastava toteuttaa valitunlaisella lähetinarkkitehtuurilla, sillä korkean näytteistystaajuuden omaavan digitaalianalogiamuuntimen ajoitusvirheet johtavat signaalin liialliseen säröytymiseen.
Työssä esitetty lähetin kykenee ylössekoittamaan kaksi 10-bittistä, 20MHz:n digitaalisesti muokattua kantataajuussignaalia 2 GHz:n taajuudelle 10 dBm:n lähtöteholla käyttäen vain 165 mW.
ED:2014-01-19
INSSI record number: 48434
+ add basket
« previous | next »
INSSI