search query: @keyword testaus / total: 122
reference: 25 / 122
« previous | next »
Author:Vastaranta, Olli
Title:Hammasvaihteiden koeajon kehittäminen vaihdetehtaassa
The development of gear test drive in a gear factory
Publication type:Master's thesis
Publication year:2011
Pages:vii + 83 s. + liitt.      Language:   fin
Department/School:Koneenrakennustekniikan laitos
Main subject:Tuotantotekniikka   (Kon-15)
Supervisor:Aaltonen, Kalevi
Instructor:Mattila, Mika
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  3151   | Archive
Keywords:gear
test drive
test run
testing
quality assurance
hammasvaihde
koeajo
koekäyttö
testaus
laadunvarmistus
Abstract (eng): The objective of this Master Thesis was to develop test driving of gears produced in a heavy gear factory.
In order to achieve this goal, target was to define the most critical development areas of the test drive arrangement.
Current test arrangement has certain imperfections.
Because of these imperfections, the safety and quality assurance level of the test drive system does not correspond to targets set in the gear factory.
The most significant problems relate to old-fashioned gear testing devices based on V-belt drives.

In the theory part of this thesis work gears were examined as test driven products.
Additionally, literature investigation was done on test drive and final inspection of gears.
The investigation focused particularly on alternative test drive methods of gears and typical measurements conducted during gear test runs.
Furthermore, current status of gear factory's test drive, and also condition monitoring and warranty maintenance of gears were analysed.
Present procedures were questioned by benchmarking test drive arrangements of two Finnish gear manufacturers.

Based on the literature investigation, current status analysis and benchmarking, the most critical development areas of the test drive arrangement were defined and argued.
After this, the results of the development work were discussed and proposals for further development were given.
The most relevant results of this thesis are: layout plan of assembly section including test drive area, pre-plan of a new test rig, requirement list concerning test drive apparatus and test run report proposal.
Abstract (fin): Työn tavoitteena oli kehittää vaihdetehtaan valmistamien hammasvaihteiden koeajoa.
Tavoitteen saavuttamiseksi työssä pyrittiin määrittämään tehtaan koeajojärjestelyn kriittiset kehityskohteet.
Vaihdetehtaan nykyisessä koeajojärjestelyssä on puutteita, joista johtuen koeajon turvallisuuden ja laadunvarmistuksen taso ei vastaa vaihdetehtaan tavoitteita.
Merkittävimmät ongelmat liittyvät vanhentuneisiin kelahihnakäyttöisiin vaihteiden koeajolaitteisiin.

Työn teoriaosiossa tarkasteltiin hammasvaihteita koeajettavina tuotteina, minkä lisäksi tehtiin kirjallisuusselvitys hammasvaihteiden koeajosta ja lopputarkastuksesta.
Selvitys kohdistui erityisesti vaihtoehtoisiin hammasvaihteiden koeajomenetelmiin sekä tyypillisimpiin koeajon yhteydessä suoritettaviin mittauksiin.

Kirjallisuustutkimuksen ohella työssä analysoitiin vaihdetehtaan koeajon sekä koeajoon välillisesti liittyvien vaihteiden kunnonvalvonnan ja takuuhuollon nykytilat.
Tehtaan nykyiset toimintamallit kyseenalaistettiin kahden suomalaisen vaihdetehtaan koeajojärjestelyihin kohdennetuilla vertailuanalyyseilla.
Kirjallisuustutkimuksen, nykytilan analysoinnin ja vertailuanalyysien pohjalta esitettiin koeajon keskeisimmät kehityskohteet argumentteineen.
Tämän jälkeen käsiteltiin kehitystyön tuloksia ja annettiin kehitysehdotuksia koeajon edistämiseksi jatkossa.
Työn oleellisimpia tuloksia ovat: kokoonpano-osaston layout-suunnitelma koeajoalueineen, uuden koeajolaitteen esisuunnitelma, koeajolaitteiston vaatimuslista sekä ehdotus vaihteiden koeajopöytäkirjaksi.
ED:2011-07-06
INSSI record number: 42641
+ add basket
« previous | next »
INSSI