search query: @keyword remote control / total: 13
reference: 3 / 13
« previous | next »
Author:Shroff, Mickey
Title:Design and Implementation of a Profile-based Protocol for Remote Industrial Automation Control
Profiilipohjaisen protokollan suunnittelu ja toteutus teollisuusautomaation etäohjaukseen
Publication type:Master's thesis
Publication year:2010
Pages:56      Language:   eng
Department/School:Informaatio- ja luonnontieteiden tiedekunta
Main subject:Tietokoneverkot   (T-110)
Supervisor:Aura, Tuomas
Instructor:Tuominen, Pasi
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  6823   | Archive
Keywords:fieldbus
Internet
profile
protocol design
remote management
remote control
TCP/IP
etähallinta
etäohjaus
Internet
kenttäväylä
profiili
protokollasuunnittelu
TCP/IP
Abstract (eng): In today's automation scene remote management is a hot topic.
New business models are built around remote access.
A protocol is needed which enables remote access over TCP/IP networks to the automation boundary in efficient manner.

The main objective of this thesis is to design and implement a profile-based protocol for industrial automation remote control.
The protocol should support transferring of field bus data and common data exchange mechanisms.
In addition, the implementation must be easily extensible and platform dependent.

This thesis also studies field buses and automation environments in general, as well as the levels of automation, starting from the bit and the device level and ending with the process and plant levels.
Furthermore, Internet readiness of field buses is reviewed.
Protocol security is also considered.

Work objectives were successfully achieved.
The protocol design and implementation produced expected results.
Also the literature study was conducted successfully.

The protocol could he developed further by opening its specification to the public for wider review.
The protocol specification could be published first to the Internet community as Internet draft.
Abstract (fin): Tämä diplomityö sai alkukipinän, kun havaittiin, että tarvitaan protokolla, jonka avulla voidaan siirtää dataa kenttäväylärajapinnasta TCP/IP-verkkoon ja toisin päin.

Diplomityön päätavoitteena on suunnitella ja toteuttaa profiilipohjainen protokolla teollisuusautomaation etäohjaukseen.
Protokollan läpi tulee voida lähettää kenttäväylädataa kaksisuuntaisesti.
Toteutuksessa tulee olla tuettuna yleisimmät tiedonsiirtotavat.
Lisäksi toteutuksen tulee olla helposti laajennettava ja sen tulee myös olla alustariippumaton.

Työssä esitellään itse suunnittelun ja toteutuksen lisäksi myös kenttäväyliä yleisemmällä tasolla sekä automaatiota sen eri tasoilla lähtien laitetasolta ja päättyen prosessi- ja tehdastasolle.
Myös kenttäväylien Internet-valmiutta tarkastellaan.
Työssä käydään läpi protokollien tietoturvaan liittyviä näkökohtia ja niiden käyttöönoton mukanaan tuomia haasteita.

Työlle asetetut tavoitteet onnistuttiin saavuttamaan hyvin.
Itse protokollan suunnittelu ja toteutus tuottivat odotetunlaiset tulokset.
Myös kirjallisuuskatsauksen osalta asetetut tavoitteet toteutuivat.
Jatkokehitysmahdollisuuksia työn toteutukselle olisi varmasti löydettävissä runsaasti.
Yksi tapa uusien kehityssuuntien ja ideoiden hankkimiseksi olisi protokollan avaaminen suuremmalle yleisölle arvioitavaksi.
Protokollakuvauksen voisi julkaista jossakin avoimessa, Internet-standardeja kehittävässä yhteisössä ja viedä sitä kautta protokollan standardointiprosessia eteenpäin.
ED:2010-09-01
INSSI record number: 40366
+ add basket
« previous | next »
INSSI