search query: @keyword mänty / total: 13
reference: 7 / 13
« previous | next »
Author:Laine, Kristiina
Title:Wood surface densification by compression: Analysing the effect of process parameters
Puun pintatiheyden kasvattaminen puristamalla; prosessiparametrien vaikutusten analysointi
Publication type:Master's thesis
Publication year:2010
Pages:77 + [13]      Language:   eng
Department/School:Puunjalostustekniikan laitos
Main subject:Puutekniikka   (Puu-28)
Supervisor:Hughes, Mark
Instructor:Rautkari, Lauri
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  2333   | Archive
Keywords:surface densifying
Scots pine
wood compression
density profile
pintatiheyden kasvattaminen
tihentyminen
mänty
puun puristaminen
tiheysprofiili
Abstract (eng): Density is one of the most significant factors affecting the mechanical properties of wood.
Scots pine has a relatively low density and increasing its density would widen the range of applications for this species.
In this study Scots pine sapwood samples were densified by compressing the porous structure under heat and moisture.
Densifying one side of wood aims at applications that require only one harder surface, such as flooring.

This study evaluated the significance of different process parameters (temperature, closing time, holding time, moisture content, and compression ratio) on wood surface densification and their effect on the wood density profile.
Furthermore, microscopic analysis was performed on a selection of samples.
The literature part describes the theory of densification including previous studies related to wood compression.

The results of this study indicate that a shorter closing time of 0.5 minutes resulted in the deformation being significantly higher and closer to the densified sample surface than with a longer closing time of 5 minutes.
Using a compression temperature of 150 °C the density curve also exhibited a higher peak closer to the sample surface, while a higher temperature of 200 °C resulted in the highest density peak being lower and further from the surface.
A longer holding time of 10 minutes exhibited a density increase over a wider section of the sample thickness than when using a shorter holding time of 1 minute.
However, the highest peak was slightly closer to the sample surface with the shorter closing time.
Higher moisture content led to deeper deformation.
However, the highest moisture content of 13.5 % exhibited a lower densification ratio than moisture contents of 11 % or 8.5 %.

The manner of wood deformation in compression can be controlled by optimizing the process parameters and thus achieving desired properties.
This method of densifying wood has not been widely investigated but it already shows great potential and requires further investigation for commercial production.
Abstract (fin): Tiheys vaikuttaa merkittävästi puun mekaanisiin ominaisuuksiin.
Metsämännyn (Pinus Sylvestris) tiheys on suhteellisen pieni ja tiheysominaisuuksia parantamalla voitaisiin laajentaa männyn käyttömahdollisuuksia.
Tässä tutkimuksessa männyn pintatiheyttä kasvatettiin puristamalla puun huokoista rakennetta lämmön ja kosteuden avulla metallilevyjen välissä.
Vain toinen puristuslevy oli lämmitetty, jolloin vain toinen pinta muovautuu.
Yhdeltä puolelta puristettua puuainesta voidaan käyttää sovelluksissa, joissa vain yhden pinnan ominaisuudet ovat korostettuja, kuten lattiamateriaaleissa.

Tässä tutkimuksessa selvitettiin eri prosessiparametrien (lämpötila, sulkemisaika, puristusaika, puun kosteus ja puristussuhde) merkitystä puristetun puun tiheysprofiiliin.
Lisäksi suoritettiin mikroskooppinen tutkimus osalle näytekappaleista.
Kirjallisuusosiossa esitettiin puun puristamisen ja tihentymisen teoriaa.

Lyhyemmällä puristusajalla (0.5 min) saavutettiin korkeampi tiheyshuippu lähempänä puun pintaa kuin pidemmällä puristusajalla (5 min), jolloin vain sisäkerrokset muovautuivat.
Käytettäessä matalampaa lämpötilaa (150 °C) tiheysprofiilissa ilmeni korkeampi tiheyshuippu lähempänä puun pintaa kuin käytettäessä korkeampaa lämpötilaa (200 °C), jolloin paksumpi osuus puusta muovautui hieman kauempana puristetusta pinnasta.
Pidempää puristusaikaa (10 min) käytettäessä hieman paksumpi osuus puusta muovautui kuin lyhyemmällä puristusajalla (1 min).
Korkeammalla kosteusprosentilla kappaleille saavutettiin korkeampi tiheyshuippu mutta puristuvuussuhde jäi matalammaksi kuin matalammilla kosteuksilla.

Puun muovaamista puristamalla voidaan hallita optimoimalla prosessiparametreja haluttujen ominaisuuksien mukaan.
Puun muovaamista vain toiselta puolelta ei ole laajasti tutkittu, mutta suurta potentiaalia on havaittavissa tämän tutkimuksen perusteella.
Jatkotutkimuksilla voitaisiin selvittää myös teollisen mittakaavan tuotannon mahdollisuuksia.
ED:2010-10-11
INSSI record number: 41024
+ add basket
« previous | next »
INSSI