search query: @keyword birch / total: 13
reference: 4 / 13
Author: | Mäki, Veli-Matti |
Title: | The characteristic study of Effective Drying-manufactured plywood |
Tutkimus Effective Drying-menetelmä vanerin ominaisuuksista | |
Publication type: | Master's thesis |
Publication year: | 2012 |
Pages: | viii + 77 + [17] Language: eng |
Department/School: | Puunjalostustekniikan laitos |
Main subject: | Puutekniikka (Puu-28) |
Supervisor: | Kairi, Matti |
Instructor: | Paajanen, Olli |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 2369 | Archive |
Keywords: | Effective Drying veneer plywood birch flatness glue bond bending ED viilu vaneri koivu tasomaisuus liimasauma taivutus saanto |
Abstract (eng): | The purpose of the thesis was to study plywood board manufactured by using Effective Drying (ED) method developed and patented at Aalto University. The ED is a new practice for veneer drying. The process uses innovative technology that operates differently than traditional veneer drying methods. The study examined the yield of ED process and approached the plywood characteristics by performing four different tests which measured flatness behaviour, glue bond quality, bending characteristics and tension bending. Three different plywood board types were manufactured for the study. The ED and two separate reference plywood boards. The manufacturing processes were divided between Aalto University and Koskisen Oy plywood mill. The performed tests showed that the ED plywood flatness behaviour and tension bending were worse than the reference boards. The mechanical strength experiments revealed that the ED samples performed similarly in the glue bond quality test and better in the bending experiments than the reference samples. It was discovered during the tests that the ED method requires further study to improve the drying quality. Also new ideas rose for new alternative actions to attach into the drying process. |
Abstract (fin): | Diplomityön tavoitteena oli tutkia Aalto-yliopistossa kehitetyn ja patentoidun Effective Drying (ED) menetelmän vaikutusta viilun ja siitä valmistetun vanerin ominaisuuksiin. ED on uusi tapa kuivata viiluja missä prosessi käyttää innovatiivista teknologiaa, joka eroaa perinteisistä viilun kuivausmenetelmistä. Tämä tutkimus ottaa kantaa ED prosessin saantoon ja lähestyy vanerin ominaisuuksia neljän eri testin kautta, jotka ovat vanerin tasomaisuus, liimasauman laatu, taivutus ominaisuudet ja paksuusjännitys vanerin sisällä. Tutkimusta varten tuotettiin kolmea erityyppistä vaneria, jotka olivat ED vaneri ja kaksi erilaista referenssivaneria. Valmistusprosessit jakautuivat Aalto-yliopiston ja Koskisen Oy vaneritehtaan välille. Suoritetut testit osoittivat, että ED vanerin tasomaisuus ja paksuusjännitys olivat huonommat kuin referenssivanereiden. Vanerin mekaanisten ominaisuuksien tutkimukset näyttivät, että verrattuna referenssivanereihin ED vanerit käyttäytyivät samoin liimasauman laadussa ja paremmin taivutusominaisuuksissa. Tutkimusten aikana huomattiin, että ED kuivaustekniikka vaatii lisätutkimuksia, jotta kuivauksen laatu paranisi. Lisaksi uusia ideoita nousi, kuinka kyseistä uutta tekniikkaa voitaisiin käyttää kuivauksen ohella tapahtuvaan viilun muokkaamiseen. |
ED: | 2013-01-09 |
INSSI record number: 45773
+ add basket
INSSI