search query: @keyword liuotus / total: 13
reference: 7 / 13
Author: | Sara, Timo |
Title: | Delignification of birch pulp in ionic liquid solution |
Koivuselluloosan delignifiointi ionisissa nesteissä | |
Publication type: | Master's thesis |
Publication year: | 2014 |
Pages: | 56 s. + liitt. 2 Language: eng |
Department/School: | Puunjalostustekniikan laitos |
Main subject: | Sellutekniikka (P3002) |
Supervisor: | Sixta, Herbert |
Instructor: | Hummel, Michael |
Electronic version URL: | http://urn.fi/URN:NBN:fi:aalto-201408292537 |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 1656 | Archive |
Keywords: | cellulose ionic liquids hydrogen peroxide dissolution lignin selluloosa ioniset nesteet vetyperoksidi liuotus ligniini |
Abstract (eng): | The objective of this thesis was to investigate the delignification efficiency of birch pulp in an ionic liquid solution. Alkaline ionic liquids provide an appropriate environment for hydrogen peroxide bleaching of prehydrolysis-kraft (PHK) pulps, which are used for the manufacture of regenerated cellulose fibers. Efficient bleaching in the ionic liquid solution could offer an economical alternative for the conventional multi-phase bleaching sequence. The literature part presents the research background and information about the interaction of the chemicals applied in this work. The feasibility of the suggested bleaching method is also evaluated. The experimental part of this thesis was performed by dissolving unbleached PHK pulp in two different ionic liquids, 1-ethyl-3-methylimidazolium acetate ([emim]OAc) and 1-ethyl-3-methylimidazolium dimethyl phosphate ([emim]dmp). In earlier studies, [emim]OAc has been the preferred solvent for lignocellulose material, thus it was used in most of the experiments. The efficiency of delignification was studied by varying the process parameters (temperature, peroxide charge, bleaching time) and the results were analyzed (kappa number, intrinsic viscosity, brightness) from the regenerated pulp samples. The effect of hydrogen peroxide stabilizers and potential process impurities was also determined. Delignification dependency on the process parameters was in accordance with conventional bleaching although with diminished effect, thus the desired removal of residual lignin was not achieved. The regenerated pulps experienced a reduction in brightness level due to formation of new chromophores and residual ionic liquid and its contaminants. Overall, delignification in [emim]OAc at 90 oC and high peroxide charge produced the best results. The intrinsic viscosity of the regenerated pulps was significantly affected even by low hydrogen peroxide charge. However, viscosity stabilization was observed around 400 ml/g as the treatment intensity was increased. |
Abstract (fin): | Tämän työn tarkoituksena oli tutkia valkaisemattoman koivuselluloosan delignifioituvuutta ioninesteliuoksissa. Alkaliset ioniset nesteet tarjoavat sopivat olosuhteet regeneroitujen selluloosakuitujen valmistuksessa käytettävän esihydrolysoidun sulfaattiselluloosan (liukosellu) vetyperoksidivalkaisuun. Tehokas valkaisu ioninesteliuoksessa voisi tarjota taloudellisen vaihtoehdon perinteiselle monivaiheiselle valkaisusekvenssille. Kirjallisuusosassa esitetään työssä sovellettujen kemikaalien tutkimustaustaa sekä niiden kemiallista vuorovaikutusta. Ehdotetun valkaisumenetelmän toteutettavuus on myös arvioitu. Työn kokeellinen osa toteutettiin liuottamalla valkaisematonta PHK-liukoselluloosaa kahteen eri ioniseen nesteeseen, 1-etyyli-3-metyyli-imidatsoliumi asetaatti ([emim]OAc) sekä 1-etyyli-3-metyyli-imidatsoliumi dimetyylifosfaatti ([emim]dmp). Aikaisemmissa tutkimuksissa [emim]OAc on pidetty ominaisuuksiltaan parhaana lignoselluloosan liuottimena, minkä vuoksi suurin osa kokeista suoritettiin sen avulla. Delignifiointitehokkuutta tutkittiin muuttamalla prosessiparametrejä (lämpötila, peroksidiannos, valkaisuaika) ja tulokset analysoitiin (kappaluku, rajaviskositeetti, vaaleus) regeneroiduista sellunäytteistä. Myös vetyperoksidin stabilointiaineiden sekä mahdollisten prosessiepäpuhtauksien vaikutus arvioitiin. Vetyperoksidilla suoritetun delignifioinnin riippuvuus prosessiparametreistä oli tavanomaisen valkaisun mukainen, tosin heikentyneellä vaikutuksella. Siksi tavoiteltua jäännösligniinin vähennystä ei saavutettu. Regeneroiduissa sellunäytteissä ilmeni vaaleuden alenemista johtuen uusista kromoforirakenteista ja jäljelle jääneestä ioninesteestä sekä sen epäpuhtauksista. Kaikkiaan, delignifiointi [emim]OAc:ssa 90 oC:ssa korkealla peroksidiannoksella tuotti parhaat tulokset. Regeneroidun sellun rajaviskositeetti muuttui merkittävästi jo alhaisella peroksidiannoksella. Viskositeetti stabiloitui noin 400 ml/g:n kun käsittelyn intensiteettiä kasvatettiin. |
ED: | 2014-08-31 |
INSSI record number: 49665
+ add basket
INSSI