search query: @keyword LWC / total: 14
reference: 4 / 14
« previous | next »
Author:Salo, Tuomo
Title:New multilayer coatings with conventional and novel coating methods
Monikerrospäällysteet uudella sovelletulla päällystysmenetelmällä
Publication type:Master's thesis
Publication year:2010
Pages:iv + 75 s. + liitt. 12      Language:   eng
Department/School:Puunjalostustekniikan laitos
Main subject:Paperi- ja painatustekniikka   (Puu-21)
Supervisor:Paltakari, Jouni
Instructor:Sundholm, Patric
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  2220   | Archive
Keywords:multilayer coatings
LWC
spray coating
blade coating
monikerrospäällystys
spraypäällystys
teräpäällystys
Abstract (eng): The goal of this work was to develop a multilayer coating structure, which would improve both smoothness and opacity of a low basis weight printing paper.
The opacity was aimed to be improved with a coloured, absorbing pre-coating layer.
The novel coating method used in this work was a high-pressure spray combined with a doctor blade.
The spray was chosen since it is capable of producing several coating layers with low coat weight and a coating which follows the base paper surface structure.
The blade was added to improve the otherwise relatively unsatisfactory smoothness, inherent for the spray coating.

The literature review covered the coating materials and conventional coating methods used in production of printing papers today.
The theories behind high pressure spraying process of paper coating colours as well as blade metering were given a closer view.

The coating experiments gave information about the influence of different blade loading pressures on the coating result.
Also the impact of adding the number of coating layers from one to up to six layers as well as the significance of absorbing layer was determined.
The blade begins to affect the coating result at coat weights from 3 to 4 g/m2 and above.
Of the measured properties blade has biggest influence on paper porosity; higher blade loading pressure decreases porosity considerably.
Multilayer structures are more porous than single coated papers at the same grammage.
The two layer structure had lowest PPS roughness and highest ISO brightness values.
What comes to opacity, the double coated samples were slightly behind the six times coated one.
The results regarding the absorbing layer were inconsistent to some extent.
However, at best the opacity was improved three times more than what was lost in ISO brightness.
Also the novel coating method comprising high-pressure spray and a doctor blade proved to be a viable coating method, capable of producing smooth surface and good coating coverage even at low coat weights.
Abstract (fin): Työn tavoitteena oli kehittää uusi monikerrospäällyste, joka parantaisi sekä painopaperin sileyttä että opasiteettia.
Opasiteettia oli tarkoitus parantaa värjätyllä, valoa tehokkaasti absorboivalla esipäällystekerroksella.
Työssä käytetty uudenlainen päällystysmenetelmä oli spray- ja teräpäällystyksen yhdistelmä.
Spraypäällystyksellä on mahdollista tehdä erittäin ohuita päällystekerroksia, jotka mukailevat hyvin paperin pintaa.
Terää käytettiin päällysteen tasoittamiseen, sillä pelkällä spraypäällystyksellä ei saavuteta riittävää sileyttä.

Kirjallisuusosassa käsiteltiin paperin päällystykseen käytettäviä materiaaleja, menetelmiä sekä yleisesti päällystämisellä haettavia hyötyjä.
Korkeapainespraypäällystykseen liittyvää teoriaa pisaran muodostumisesta ja leviämisestä käsiteltiin tarkemmin, kuten myös terän käyttöä päällystämisessä.

Päällystyskokeilla saatiin tietoa terän käytön vaikutuksista päällystetyn paperin ominaisuuksiin.
Myös päällystekerrosten lukumäärän merkitystä tutkittiin vertaamalla yksi-, kaksi-, kolme- ja kuusikerroksista rakennetta samassa päällysteen kokonaisvahvuudessa.
Lisäksi tutkittiin absorboivan esipäällystekerroksen merkitystä.
Terän käytöllä näyttää olevan merkitystä päällystystulokseen vasta 3-4 g/m2 päällystemääristä ylöspäin.
Terällä on suurin vaikutus paperin huokoisuuteen; suurempi teräpaine vähentää huokoisuutta.
Vastaavasti monikerrosrakenne on huokoisempi kuin kerran päällystetty.
Kahdella päällystekerroksella saavutettiin matalin PPS karheus ja paras ISO-vaaleus.
Opasiteetissa parhaaseen tulokseen päästiin kuudella kerroksella.
Värjätyllä esipäällystekerroksella saatiin vaihtelevia tuloksia.
Parhaimmillaan opasiteetti kuitenkin parani 3 yksikköä, kun ISO-vaaleus vastaavasti putosi yhden yksikön verran.
Sprayn ja terän yhdistelmä todettiin toimivaksi päällystysmenetelmäksi, jolla on mahdollista tuottaa tasaista pintaa ja hyvä peittävyys jo pienillä päällystemäärillä.
ED:2010-06-02
INSSI record number: 39711
+ add basket
« previous | next »
INSSI