search query: @supervisor Saarela, Olli / total: 148
reference: 28 / 148
« previous | next »
Author:Mäkelä, Satu
Title:Experimental study of the adhesive flow in injection bonding
Liiman virtaavuuden kokeellinen tutkimus injektioliimauksessa
Publication type:Master's thesis
Publication year:2011
Pages:vii + 73 s. + liitt. 16      Language:   eng
Department/School:Sovelletun mekaniikan laitos
Main subject:Lentotekniikka   (Kul-34)
Supervisor:Saarela, Olli
Instructor:
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  4031   | Archive
Keywords:adhesively bonded joint
adhesive flow
filling time
viscosity
joint-material
liimaliitos
liiman virtaavuus
täyttymisaika
viskositeetti
saumamateriaali
Abstract (eng): The main goal of the thesis is to study the adhesive flow in a new structural bonding method, injection bonding, through experimental testing.
In addition, the goal is to estimate the applicability of the method as a respectable alternative for the commonly used adhesive pastes and films.
Moreover, the aim is to develop a numerical model to estimate the pressure difference between the ends of a joint gap and further to develop a program that estimates adhesive filling times using the obtained pressure difference values.

In injection bonding, liquid adhesive is injected between two adherends using vacuum pressure.
The joint gap is kept open using either spacers or a joint material.
The thesis investigates the effect of joint thickness, injection pressure, adhesive viscosity, joint material and surface roughness on the adhesive flow and filling time.
The failure mode and strength of injection bonded specimens are examined by means of tension tests.
The viscous nature of the adhesives is determined by measuring the viscosity curves using rotational rheometer.
The use of injection bonding in a composite bridge application is examined by assuming built-in feeding and suction trails.

Experimental injection tests showed that injection bonding provides fast spreading and uniform bond line.
The method is applicable with adhesives having a viscosity lower than or around 80 Pas at a shear rate of 0.2 1/s.
The use of a joint material provided more advantageous flow pattern than did the metallic spacers.
The tension tests showed that the failure mode was completely interfacial with peel ply treated specimens thus suggesting incomplete wetting, whereas, a cohesive failure of an adherend was observed with the grit blasted specimens.
These results suggested that the failure strength of a bond is not dependent on the studied bonding method if adequate surface pre-treatment is used.
The results obtained from the numerical model did not correlate well with the experimental injection test results.
Therefore, it was decided not to further develop the program to estimate the adhesive filling times.
Abstract (fin): Työn päätavoite on tutkia kokeellisesti liiman virtaavuutta uudessa rakenneliimaukseen käytettävässä menetelmässä, injektioliimauksessa, ja edelleen arvioida menetelmän soveltuvuutta vaihtoehtona pasta- ja kalvoliimaukselle.
Työn tavoitteena on myös kehittää numeerinen malli, jonka avulla pystytään arvioimaan paine-eroa liimasauman päiden välillä ja edelleen kehittää ohjelma, joka arvioi sauman täyttymisaikoja edellä mainittujen paine-erojen avulla.

Injektioliimauksessa liima injektoidaan kahden pinnan väliin alipaineella.
Liimasauma pidetään auki joko käyttämällä ohuita lankoja tai saumamateriaalia.
Tässä työssä tutkitaan sauman paksuuden, injektiopaineen. liiman viskositeetin, saumamateriaalin ja pinnanlaadun vaikutusta liiman virtaavuuteen ja täyttymisaikaan.
Injektoimalla valmistettujen koekappaleiden murtumismoodia ja murtumisjännitystä arvioidaan vetokokeilla.
Liiman viskoosinen luonne selvitetään mittaamalla viskositeettikäyrät rotaatioreometrilla.
Injektioliimausmenetelmän soveltamista komposiittisillassa kuvataan olettaen syöttö- ja imukanavat sisäänrakennetuiksi.

Injektiokokeet osoittivat, että injektioliimaus mahdollistaa nopean levittämisen ja tasaisen liimasauman.
Menetelmä soveltuu käytettäväksi liimoilla, joiden viskositeetti 0,2 1/s leikkausnopeudella on alhaisempi kuin tai noin 80 Pas.
Saumamateriaalilla saavutettiin paremman muotoinen virtaus kuin langoilla.
Vetokoetulokset osoittivat, että karhennuskankaalla käsiteltyjen koekappaleiden murtuminen tapahtui liiman ja laminaatin rajapinnassa kun taas oksidipuhallutetuilla koekappaleilla murtuminen tapahtui laminaatin sisällä.
Nämä tulokset osoittivat, että sauman murtumisjännitys ei ollut riippuvainen käytetystä liimausmenetelmästä, kun riittävää pintakäsittelymenetelmää oli käytetty.
Numeerisesta mallista saadut tulokset eivät vastanneet kokeellisesti määritettyjä tuloksia.
Tästä syystä ohjelmaa täyttymisajan arvioimiseksi ei kehitetty.
ED:2011-09-13
INSSI record number: 42758
+ add basket
« previous | next »
INSSI