search query: @keyword geneettiset algoritmit / total: 16
reference: 4 / 16
« previous | next »
Author:Sironen, Juha
Title:Freeness estimation for TMP mainline refining
Freeneksen estimointi TMP jauhatuksen päälinjassa
Publication type:Master's thesis
Publication year:2011
Pages:[9] + 67      Language:   eng
Department/School:Automaatio- ja systeemitekniikan laitos
Main subject:Systeemitekniikka   (AS-74)
Supervisor:Koivo, Heikki
Instructor:Kosonen, Mika ; Puonnas, Matti
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  4692   | Archive
Keywords:TMP refining
refiner
freeness
vibration
specific energy consumption
freeness estimate
linear regression
genetic algorithms
neural network
Kalman filter
correlation
standard deviation
TMP-jauhatus
jauhin
värähtely
energian ominaiskulutus
freeness-estimointi
lineaarinen regressio
geneettiset algoritmit
neuroverkko
Kalman-suodin
korrelaatio
keskihajonta
Abstract (eng): The main purpose of this thesis was to examine a freeness estimate, developed for the TMP process, and to determine its suitability for the process control.
The estimate (FET model) was developed in previous studies, by linear regression.
The functionality of the estimate has not been studied previously when a reference sample from the freeness analyser has been available.
In the previous studies, the reference results were made in the laboratory and the sample interval of the freeness measurement were about eight hours.
In this thesis the sample interval is approximately fifty minutes.

Freeness estimation is, however, very difficult, due to two main disturbances: slowly occurring wearing of refiner plates and more rapid variations in raw material quality.
Also strongly noising measurements bring their own challenges to the estimation.
At first, this thesis focuses on the TMP process and refiners in general.
After this, the thesis covers the most relevant measurements, from the point of view of the thesis, and presents the process control methods of the TMP process, including the FET model.
In addition, the thesis briefly presents the mathematical methods which were used.
Furthermore, the obtained results are presented.
Based on these results, a new self-tuned freeness estimate is developed which is based on state estimator.

The new model is updated by the extended Kalman filter each time when the measurement of the freeness analyser has been completed.
The developed model is much more accurate and more reliable than the earlier freeness estimate.
Currently, the new model is not implemented into the automation system of the TMP plant and it remains the task of future studies.
The developed model is quite simple and it is suitable for other TMP lines without any significant equipment purchases.
Abstract (fin): Diplomityön ensisijaisena tavoitteena oli tutkia. kuinka TMP prosessille kehitetty freeness estimaatti soveltuu prosessin hallintaan.
Estimaatti (FET) on kehitetty aikaisemmissa tutkimuksissa lineaarisella regressiolla.
Estimaatin toimintaa ei ole aikaisemmin tutkittu, kun käytettävissä on korjaava tulos freeness-analysaattorilta.
Aikaisemmissa tutkimuksissa vertailutuloksena on käytetty freeness-laboratoriomääritystä, jolloin näyteväli on ollut noin kahdeksan tuntia.
Tässä työssä analyysin näyteväli on käytännössä ollut noin 50 minuuttia.

Freeneksen estimointi on kuitenkin hyvin hankalaa, johtuen kahdesta päähäiriöstä: jauhimen terien kuluminen ja raaka-aineen vaihtelu.
Myös voimakkaasti kohisevat mittaukset tuovat estimointiin oman haasteensa.

Tämä diplomityö käsittelee ensin yleisesti TMP-prosessia ja jauhimia.
Tämän jälkeen työssä käydään läpi työn osalta oleellisimpia TMP-prosessin mittauksia ja prosessinhallintamenetelmiä, mukaan lukien aikaisemmin kehitetty FET-malli.
Myös työssä käytetyt matemaattiset työkalut esitellään.
Lisäksi työssä esitetään tuloksia jo olemassa olevan freeness-estimaatin toiminnasta.
Näihin tuloksiin perustuen työssä kehitetään itse virittyvä estimaatti tilaestimoinniIla.

Lopputuloksena luotua mallia päivitetään laajennetulla Kalman-suotimella aina, kun uusi freeness-analyysi valmistuu analysaattorilta.
Kehitetty estimaatti toimii huomattavasti paremmin kuin aikaisemmat estimaatit.
Mallia ei tosin ajan puutteen vuoksi ehditty luomaan tehtaan automaatiojärjestelmään.
Tämä jää tulevien tutkimuksien tehtäväksi.
Kehitetty malli on suhteellisen yksinkertainen ja soveltuu käytettäväksi muillakin TMP-linjoilla, ilman suurempia laitehankintoja.
ED:2011-08-16
INSSI record number: 42651
+ add basket
« previous | next »
INSSI