search query: @keyword surface roughness / total: 16
reference: 5 / 16
« previous | next »
Author:Huttunen, Saara
Title:Development of an improved boundary-layer model for a wind turbine blade icing code
Rajakerrosmallin kehittäminen tuulivoimalan lapojen jäätymisen simulointiohjelmaan
Publication type:Master's thesis
Publication year:2013
Pages:iv + 77 s. + liitt. 3      Language:   eng
Department/School:Sovelletun mekaniikan laitos
Main subject:Lentotekniikka   (Kul-34)
Supervisor:Siikonen, Timo
Instructor:Dillingh, Jeroen
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  4010   | Archive
Keywords:differential boundary-layer model
algebraic turbulence model
surface roughness
transition
heat transfer
icing
ice accretion
flat plate
wind power
wind turbine
cold climate
differentiaali rajakerrosmalli
algebrallinen turbulenssimalli
pinnankarheus
lämmönsiirto
jäätyminen
jään muodostuminen
tasolevy
NACA 0012
tuulivoima
tuulivoimala
tuuliturbiini
jäätävät olosuhteet
Abstract (eng): An improved boundary-layer model for the ice accretion software TURBICE was developed in this study.
Special attention was paid to the surface roughness that is present in icing phenomena.
Methods were selected based on requirements posed by detailed mass and heat transfer analyses related to the ice build-up.

The developed differential boundary-layer model relies on transformation to describe an airfoil by a flat plate surface with a rectangular grid.
Keller's box method is applied to solve the differential boundary-layer equations.
An algebraic turbulence model based on mixing length is applied and modified for rough surfaces.
The airfoil is simulated in a downstream marching order and, therefore, only flows without separation and reversed flow can be simulated.
The model estimates the transition point by means of en method for smooth surfaces.
A criterion based on the height of the sand-grain roughness is used with rough surfaces.

The model was tested on a flat plate and a NACA 0012 airfoil, both for smooth and rough surfaces.
Two additional transition models were also adopted for testing.
Transition results together with the boundary-layer parameters were compared to theoretical models and experimental data.
Results of the boundary-layer flow for a flat plate accurately coincide with theory.
For a NACA 0012 airfoil, the results compare well with the angles of attack ranging from e.g. -5 to +5 degrees depending on the Reynolds number.
Transition location was estimated with good accuracy.
Inconsistencies were located on the leading edge and in the transition region.

The rapid change of the boundary-layer parameters near the transition point was unphysical and could be estimated more effectively with a two-way coupled structure.
Numerical behaviour, grid settings and the skin-friction coefficient definition caused the values of the skin-friction and heat-transfer coefficients to be overestimated on the leading edge.
Heat transfer coefficient distributions were compared to the current version of TURBICE and experimental tests.
Both the new model and TURBICE compared well with the experimental results for a smooth surface, but as the roughness was added, the new model produced more accurate results than TURBICE.

One of the benefits of the new model is the more accurate local velocity profiles within the boundary layer, which enables more advanced heat and mass transfer analyses and application of a two-dimensional icing model in the future.
Another benefit stems from the application of the inverse method, which allows the model to simulate short laminar separation bubbles.
This is the first step towards simulating the regions of separated flow behind the horn type ice shapes.
Abstract (fin): Tässä työssä kehitettiin parannettu rajakerrosmalli jäätymistä simuloivaan TURBICE ohjelmaan.
Huomiota kiinnitettiin erityisesti pinnan karheuteen. jota esiintyy jäätymisilmiössä.
Menetelmien valinnassa painotettiin yksityiskohtaisen massan- ja lämmönsiirtoanalyysin vaatimuksia jään kertymisessä.

Kehitetty differentiaalinen rajakerrosmalli muuntaa siipiprofiilin tasolevyksi ja kuvaa sen suorakaiteen muotoisella laskentahilalla.
Differentiaalimuotoiset rajakerrosyhtälöt ratkaistaan Kellerin laatikkomenetelmällä.
Mallissa käytetään sekoituspituuteen perustuvaa algebrallista turbulenssimallia. joka on muokattu käytettäväksi karheilla pinnoilla.
Siipiprofiilia simuloidaan järjestyksessä virtauksen suuntaisesti. joten ainoastaan kiinnittynyttä virtausta ilman virtauksen irtoamista ja takaisinvirtausta voidaan mallintaa.
Malli arvioi transitiopisteen sijainnin en menetelmällä sileällä pinnalla.
Karhealla pinnalla käytetään pinnankarheuden suuruuteen perustuvaa menetelmää.

Mallia testattiin tasolevyllä ja NACA 0012 siipiprofiililla sekä sileälle että karhealle pinnalle.
Kahta muuta transitiomallia käytettiin myös testaukseen.
Transition tuloksia ja rajakerroksen parametreja verrattiin teoreettisiin malleihin ja kokeellisista tutkimuksista saatuihin tuloksiin.
Tasolevyn tulokset vastaavat teoriaa tarkasti.
NACA 0012 siipiprofiilille tulokset ovat hyviä esimerkiksi kohtauskulmien -5° ja +5° välillä riippuen Reynoldsin luvusta.
Transitiopisteen sijainti arvioitiin hyvin.
Epäkohtia tuloksissa löytyi johtoreunalla ja transitioalueella.

Rajakerrosparametrien nopea muutos transitiopisteen lähellä oli luonnotonta ja niiden arviointia voitaisiin parantaa kaksisuuntaisella kytkennällä rajakerrosmallin ja kitkattoman virtauksen ratkaisijan välillä.
Kitkakertoimen ja lämmönsiirtokertoimen arvot johtoreunalla olivat liian suuria yhtälöiden ratkaisun numeerisesta luonteesta, laskentahilan asetuksista ja kitkakertoimen määritelmästä johtuen.
Lämmönsiirtokertoimen jakaumia verrattiin nykyiseen TURBICE versioon ja kokeellisiin tuloksiin.
Sekä uuden mallin että TURBICE -ohjelman tulokset vastasivat hyvin kokeellisia tuloksia sileällä pinnalla, mutta karhealla pinnalla uusi rajakerrosmalli tuotti tarkempia tuloksia kuin TURBICE.

Yksi uuden mallin etu on, että rajakerroksen paikalliset nopeusjakaumat voidaan mallintaa tarkasti.
Se mahdollistaa edistyneemmän massan- ja lämmönsiirtoanalyysin sekä kaksiulotteisen jäätymismällin käytön tulevaisuudessa.
Toinen etu on, että kun käänteinen menetelmä lisätään malliin, sillä voidaan mallintaa lyhyitä laminaareja irtoamiskuplia.
Se on ensimmäinen askel kohti irronneen virtauksen alueen mallinnusta virtausta häiritsevien epäaerodynaamisten jäänmuotojen takana.
ED:2013-10-18
INSSI record number: 47353
+ add basket
« previous | next »
INSSI