search query: @supervisor Maloney, Thad / total: 17
reference: 16 / 17
« previous | next »
Author:Juntunen, Valtteri
Title:Kuivapainoprofiilin hallinta ja siihen vaikuttavat tekijät
Controlling of owen dry weight profile and factors affecting on it
Publication type:Master's thesis
Publication year:2010
Pages:86 s. + liitt. 23      Language:   fin
Department/School:Puunjalostustekniikan laitos
Main subject:Paperi- ja painatustekniikka   (Puu-21)
Supervisor:Maloney, Thad
Instructor:Jortama, Pirjo ; Seppä, Tomi ; Lehto, Paavo
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  2219   | Archive
Keywords:oven dry weight profile
streakiness
gapformer
forming wires
profile control
profile adjustment
kuivapainoprofiili
vanaisuus
piikkisyys
kitaformeri
märkäviirat
profiilin säätö
profiilin hallinta
Abstract (eng): The aim of the Thesis was to study causes affecting to appearance of streaks in oven dry weight profile and minimizing of them, develop techniques to control streaking during production and analyze a proposal for updating used version of profile control software made by automation vendor.

It has been noted at the paper machine, that most important single reason behind the appearance of streaks is in changing of the forming fabrics.
Study which was made during Thesis covers this theory.
Streakiness can be noticed to been significantly different after every time when forming fabric has been changed.
Only in one case this has not been valid.

Wetting of the fabrics in the beginning of start-up, controlling of the tension of the fabrics during the start-up phases and maintain of the tension after start-up are critical factors for the fabrics for acting properly during production.
Effect of these factors were minimized during Thesis in three start-ups with new wires by clarifying actions during crawling and by developing automatic tension controlling The possibilities for controlling streakiness during production were studied in test-run which was established based on Taguchi-method.
During test-run, which was made in co-operation with fabric vendor, the effect of under pressure levels on the water removal elements at gap and blade-area, the loading pressure of the MB-blades and tension of bottom fabric were tested.
Target was to have effect on profile 2sigma and on max-min difference of single streaks.
Results show that 2sigma-va!ue can he decreased, but no single streaks can he vanished.

Part of the Taguchi-method was to re-test the best controlling parameters-set found in Taguchi-run for to confirmationo the possibility to reach again the same effect on profile.
During this re-run, further research was made in the field of testing possibilities for controlling profile by studying effect of changing head box consistency and wire water consistency.
Confirmation showed that increase in the profile was reached with optimal controlling parameters-set.
During further research, biggest effect was in formation, although 2sigma was decreased also.

Earlier it has been noticed at the machine, that the effect of the streaks appeared in the profile can be decreased when changing the fabrics position in the CD-direction of the machine.
During Thesis, studies were made to develop this method further in the wire section.
Based to the results reached in the actual and simulated test-runs show that there is high potential to affect to machine reel profile very effectively.
Abstract (fin): Diplomityön tavoitteena oli tutkia kuivapainoprofiilissa ilmenevän vanaisuuden ilmenemiseen vaikuttavia tekijöitä, minimoida niiden syntyminen, kehittää menetelmiä vanaisuuden hallintaan käynnin aikana sekä analysoida automaatiotoimittajan tekemää ehdotusta profiilinsäätöohjelman päivittämiseksi.

Aiemmin on huomattu, että suurin yksittäinen vaikutus kuivapainoprofiilissa ilmenevään vanaisuuteen on viirojen vaihdolla.
Työssä suoritettu tutkimus tukee tätä.
Kahden viimeisen vuoden aikana suoritettujen viiran vaihtojen jälkeen yhtä tapausta lukuun ottamatta profiilissa ilmenevä vanaisuus on ollut merkittävästi eroava.

Viirojen perusteellinen tekeyttäminen ylösajon alkuvaiheessa, kireyden asettelu ja ylläpito koko ylösajon ajan sekä viirojen jälkikiristykset heti ylösajon jälkeen ovat kriittisiä tekijöitä viiran tulevan toimivuuden kannalta.
Näiden tekijöiden vaikutus minimoitiin työn aikana suoritetuissa kolmessa alaviiran vaihdossa, tarkentamalla toimenpiteitä viiraosan ryöminnän aikana sekä kehittämällä viirankiristimen toimintaa automaattisäädöllä.

Mahdollisuuksia profiilissa ilmenevän vanaisuuden hallintaan tutkittiin Taguchi-koesuunnittelumenetelmällä toteutetussa koeajossa.
Kudostoimittajan kanssa yhteistyössä suoritetussa koeajossa testattiin alkuvedenpoistoelementtien alipaineiden, kuormituslistojen kuorman ja viiran kireyden muutosten vaikutusta profiilin 2sigmaan ja yksittäisten profiilipiikkien max-min erotukseen.
Koeajon tulosten perusteella profiiliin saadaan vaikutusta, mutta yksittäisiä vanoja ei saada poistettua.

Taguchi-koeajoon kuuluvan parhaiden ajoparametrien toistettavuuden konfirmointikoeajon yhteydessä testattiin jatkotutkimuksena myös perälaatikon sakeuden ja viiravesisakeuden muutoksen vaikutusta profiiliin.
Konfirmoinnissa voitiin todeta, että Taguchi-kokeessa parhaaksi todetulla ajoparametrikombinaatiolla oli saavutettavissa samantasoinen parannus profiilissa.
Jatkokokeessa suurin vaikutus saatiin formaatioon, mutta profiilin 2sigma parani myös.

Profiilissa ilmenevien vanojen vaikutusta konerullaprofiiliin on paperikoneella huomattu saatavan vähennettyä viiran paikkaa muuttamalla.
Työssä tutkittiin mahdollisuuksia kehittää tätä menetelmää edelleen.
Suoritettujen kokeellisten ja laskennallisten testien perusteella vanojen vaikutusta on mahdollista oleellisesti minimoida.

Automaatiotoimittaja on ehdottanut paperikoneelle tehtäväksi profiilinsäätöohjelman päivitys.
Työssä suoritetussa päivitysversion analysoinnissa selvitettiin edut nykyiseen ohjelmaan nähden.
Päätelmänä ehdotettiin päivityksen testaamista.
Suora parannus profiilien hallintaan liittyen oletetaan pieneksi, sillä aiemmin on todettu nykyisen järjestelmän toimivuus hyväksi.
Uudessa säätöohjelmassa monimuuttuja-algoritmi mahdollistaa sen sijaan profiiliensäätöstrategian kehittämisen ja tällä uskotaan olevan suora vaikutus kuivapainoprofiilin hallinnassa.
Samassa yhteydessä päivityksen kanssa ehdotettiin teetettäväksi kaksi automaatiotoimittajan aiemmin tarjoamaa profiilin optimointiin tarkoitettua ohjelmaa.
ED:2011-02-02
INSSI record number: 41518
+ add basket
« previous | next »
INSSI