search query: @keyword electric drive / total: 18
reference: 1 / 18
« previous | next »
Author:Mäkinen, Sami
Title:Analysis of Vibration and Shocks for Preventing Failures in Electric Drives During Operation and Transportation
Tutkimus taajuusmuuttajiin kohdistuvasta tärinästä ja iskuista vikojen estämiseksi käytön ja kuljetuksen aikana
Publication type:Master's thesis
Publication year:2014
Pages:vii + 57      Language:   eng
Department/School:Signaalinkäsittelyn ja akustiikan laitos
Main subject:Signaalinkäsittely   (S3013)
Supervisor:Wichman, Risto
Instructor:Martinmaa, Juha
Electronic version URL: http://urn.fi/URN:NBN:fi:aalto-201412303343
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  2505   | Archive
Keywords:vibration
shock
electric drive
accelerometer
gyroscope
magnetometer
tärinä
isku
taajuusmuuttaja
kiihtyvyysanturi
gyroskooppi
magnetometri
Abstract (eng):This Master's thesis studies vibration and shocks on electric drives during operation and transportation.
A battery operated application with low power consumption utilizing MEMS-technology sensors and embedded processing is planned and built to analyze characteristics of vibration and shocks in real time.
The analysis of vibration is provided using a method that combines simultaneous detection of peaks and zero-crossings of acceleration data.
Samples of raw data are also saved for later analysis to inspect vibration characteristics in the frequency domain.
Theory for estimating other inertial factors such as velocity, displacement and rotation is also provided by using data gathered from the accelerometer, gyroscope and magnetometer.

The practical part of this thesis consists of describing the test setups and presenting the results.
The measured results show that the vibration analyzer can reliably estimate the amplitude and frequency of the vibration if the signal is mainly sinusoidal.
The amplitude and the amount of shocks are also saved correctly and with the knowledge of orientation, it can be seen if the device has fallen down.
The measured inertial data from a transit bus and an airplane indicates that it is possible to detect whether the device is being transported by land or air.
Heading estimates are also calculated from the gyroscope and magnetometer which could possibly be used later in an inertial navigation system.
Abstract (fin):Tässä diplomityössä tutkitaan taajuusmuuttajiin kohdistuvaa tärinää ja iskuja käytön sekä kuljetuksen aikana.
Tärinän ja iskujen ominaispiirteitä tutkitaan suunnittelemalla ja toteuttamalla paristokäyttöinen vähän virtaa kuluttava laite, joka hyödyntää MEMS-teknologiaa ja sulautettua prosessointia.
Tärinän analysointi toteutetaan käyttämällä menetelmää, joka perustuu yhtäaikaiseen kiihtyvyysdatassa esiintyvien piikkien ja nollakohtien havaitsemiseen.
Raakadataa kerätään myös talteen, jotta tärinän ominaisuuksia voidaan myöhemmin tarkastella taajuustasossa.
Työssä esitetään myös teoriaa, kuinka nopeutta, siirtymää ja rotaatiota voidaan laskea kiihtyvyysanturilta, gyroskoopilta ja magnetometriltä kerätystä datasta.

Työn käytännön osuus sisältää kuvauksen käytetyistä testausmenetelmistä ja esittää mitatut tulokset.~Tärinän osalta näistä tuloksista voidaan päätellä, että käytetty sovellus estimoi luotettavasti tärinän amplitudin ja taajuuden, mikäli signaali on pääosin sinimuotoista.
Iskujen määrät ja niiden amplitudit saadaan myös tallennettua oikein, ja orientaation avulla voidaan myös selvittää, mikäli laite on kaatunut.
Lähiliikennebussista ja lentokoneesta kerätystä inertiaalisesta datasta voidaan myös päätellä, onko laitetta kuljetettu maa- vai ilmateitse.
Suuntaestimaatteja on myös laskettu gyroskoopilla sekä magnetometrillä ja tätä dataa voidaan mahdollisesti käyttää myöhemmin kehitettäessä inertiaalista navigointia.
ED:2015-01-18
INSSI record number: 50402
+ add basket
« previous | next »
INSSI