search query: @supervisor Kuosmanen, Petri / total: 195
reference: 78 / 195
Author: | Nikula, Eemeli |
Title: | Telan pintaan syntyvän hiomajäljen syntymekanismin selvittäminen |
Investigation of the formation of surface mark on roll grinding | |
Publication type: | Master's thesis |
Publication year: | 2009 |
Pages: | 56 Language: fin |
Department/School: | Koneenrakennustekniikan laitos |
Main subject: | Koneensuunnitteluoppi (Kon-41) |
Supervisor: | Kuosmanen, Petri |
Instructor: | Pirttiniemi, Jukka |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark TKK 6547 | Archive |
Keywords: | roll grinding grinding chatter chatter marks telahionta hiomavärähtelyt hiomajälki |
Abstract (eng): | The purpose of this research was to investigate the formation of the surface mark that occurs during roll grinding. The aim was to find out what factors in the grinding process affect to the surface mark. Roll grinding requires extremely high standards of accuracy, because when the rolls are m operation, even small errors in the dimensional accuracy might cause problems. The surface mark examined here is more of an optical surface quality error than a dimensional error in the roll. The hypothesis was that it is a grinding vibration based problem, which is a usual reason for similar surface marks. In the literature study, grinding surface mark related literature and basic theory for grinding chatter are presented. In experimental section, research methods and equipments are presented. Laboratory tests were carried out using the roll grinder m the Laboratory of the Department of Engineering Design and Production in the Helsinki University of Technology. The study consisted of vibration measurement and analysis m different grinding conditions and other tests with grinding equipments. The principle was to measure the vibrations occurring during the grinding and to find out what factors in the grinding process affect to the formation of the surface mark. As a result of the study, the formation mechanism of the surface mark could not be found. Thus the main objective of this research was not achieved. However, as a result of the experiments, much information was obtained on the matters which have no effect to the surface mark. |
Abstract (fin): | Tutkimuksessa selvitettiin telan pintaan hionnassa syntyvää hiontajälkeä. Tavoitteena oli löytää hiomajäljen syntymekanismi ja selvittää millä hiomaprosessin osatekijöillä on vaikutusta jäljen syntymiseen. Telahionnassa on erittäin suuret tarkkuusvaatimukset, koska telojen ollessa käytössä pienetkin virheet mittatarkkuudessa aiheuttavat ongelmia. Tutkittava hiomajälki on enemmänkin optinen pinnanlaatuvirhe kuin mitattavissa oleva telan geometriavirhe. Lähtöoletuksena oli, että kyseessä on hiontavärähtelyyn liittyvä ongelma, mikä on tavallinen syy vastaavien hiomajälkien esiintymiseen. Kirjallisuusosassa on selvitetty telahiontaan ja hiomavärähtelyyn liittyviä perusasioita ja etsitty vastaaviin hiontajälkiin liittyviä tutkimuksia. Kokeellisessa osuudessa on esitetty käytettävät laitteistot ja tutkimusmenetelmät. Kokeellinen tutkimus tehtiin Teknillisen korkeakoulun koneenrakennustekniikan laitoksen telahiomakoneella. Tutkimus koostui pääasiassa värähtelymittauksista telahionnan aikana, joiden lisäksi suoritettiin muita tarvittavia kokeita. Periaatteena oli mitata hionnan aikana ilmeneviä värähtelyjä ja liikkeitä, sekä selvittää systeemin eri osatekijöiden vaikutukset jäljen syntymiseen. Tutkimuksen tuloksena ei löydetty hiomajäljen syntymekanismia eikä näin saavutettu päätavoitetta. Kokeiden tuloksena saatiin kuitenkin paljon tietoa asioista, jotka eivät vaikuta hiomajälkeen sekä tämä dokumentti hiontajäljen selvittämiseen liittyvistä tutkimuksista. |
ED: | 2010-02-03 |
INSSI record number: 38850
+ add basket
INSSI