search query: @keyword tuotannon ylösajo / total: 2
reference: 2 / 2
« previous | next »
Author:Turppo, Ahti
Title:Tuotantoinsinöörin systemaattinen toiminta tuotannon ylösajovaiheessa
Program Engineer`s Systematic Action Model during Production Ramp-Up Phase
Publication type:Master's thesis
Publication year:2004
Pages:88      Language:   fin
Department/School:Tuotantotalouden osasto
Main subject:Teollisuuden kehittäminen ja johtaminen   (TU-117)
Supervisor:Kauranen, Ilkka
Instructor:Keskinen, Niina
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto     | Archive
Keywords:ramp up
milestone
NPI-process
tuotannon ylösajo
etappi
NPI-prosessi
Abstract (eng):The main purpose of this study was to create a Program Engineer's Handbook to quide Program Engineers' actions in various phases of the production ramp-up.
These tasks and responsibilities specified in the Handbook had to support an action model based on subtargets or milestones.
The goal was to create a systematic production ramp-up action model which can be used as a common set of instructions when performing tasks and training personnel.

To realize this, information has been collected from feedback meetings held with the customers, from defect analysis based on everyday practices at the Eimo-company and from studies published in the literature.
The result of this development work, the Program Engineer's Handbook, has been tested in a demanding production ramp-up of a new project.
The obtained experiences were also systematically evaluated at project feedback meetings.

The developing of the Program Engineer's Handbook consisted of several subprojects.
Customer needs were clarified by a customer inquiry.
To help with assigning project resources a tool measuring the project work load was also developed.
Rump-up checklists were produced to quarantee a systematic ramp-up and to measure the results of the ramp-up.

The Program Engineer's Handbook and the Work Load Tool help the Program Engineers to evaluate their resources easier than previously.
The production checklists in the Program Engineer's Handbook enable the collection of real-time information and lead to process improvement.
Abstract (fin):Työn tavoitteena oli luoda tuotantoinsinöörin käsikirja, joka ohjaa tuotantoinsinöörien toimintaa ylösajon eri vaiheissa.
Käsikirjaan kirjattujen tehtävien ja vastuiden tuli tukea toimintatapaa, joka perustuu välitavoitteisiin eli etappeihin.
Käsikirjan avulla pyrittiin luomaan systemaattinen tuotannon ylösajon toimintamalli, jota voidaan käyttää yleisenä ohjeena työtehtävien suorittamisessa ja henkilöstön kouluttamisessa.

Työn toteutuksessa käytettiin apuna asiakkaiden kanssa järjestettyjä projektin palautekeskustelutilaisuuksia, käytännön toiminnan epäkohdista saatuja palautteita ja alan kirjallisuudessa julkaistuja tutkimustuloksia.
Kehitystyön tuloksena syntynyttä tuotantoinsinöörin käsikirjaa testattiin eräässä vaativassa uuden tuoteprojektin käynnistämishankkeessa.
Siitä saatuja käyttökokemuksia arvioitiin systemaattisesti myös osana projektien palautekeskusteluja.

Tuotantoinsinöörin käsikirjan kehittäminen koostui useista osahankkeista.
Asiakkaan tarpeet selvitettiin asiakaskyselyn avulla.
Tuotantoresurssien jakamisen avuksi kehitettiin työkuormaa jäljittelevä työkalu.
Järjestelmällisen tuotannon ylösajon turvaamiseksi ja tavoitteiden mittaamiseksi kehitettiin tuotannon ylösajon tarkistuslistoja.

Tuotantoinsinöörin käsikirjan ja työkuormaa jäljittelevän työkalun avulla voidaan arvioida tuotantoinsinööriresursseja aikaisempaa paremmin.
Käsikirjan käyttöön liittyvät tuotannon ylösajon tarkastuslistat mahdollistavat reaaliaikaisen tiedon keräämisen sekä auttavat hankkeen etenemisen käsikirjassa esitettyjen tehtäväkokonaisuuksien mukaisessa järjestyksessä.
ED:2004-05-18
INSSI record number: 25246
+ add basket
« previous | next »
INSSI