search query: @instructor Kokkonen, Jani / total: 2
reference: 2 / 2
« previous | next »
Author: | Hakkarainen, Pertti |
Title: | WAP Downlink Performance Evaluation in UMTS Network |
WAP-vastaanottolinkin suorituskyvyn arviointi UMTS-verkossa | |
Publication type: | Master's thesis |
Publication year: | 2004 |
Pages: | x + 69 Language: eng |
Department/School: | Sähkö- ja tietoliikennetekniikan osasto |
Main subject: | Tietoverkkotekniikka (S-38) |
Supervisor: | Virtamo, Jorma |
Instructor: | Kokkonen, Jani ; Aalto, Samuli |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark S80 | Archive |
Keywords: | WAP WTP TCP IP UMTS WCDMA |
Abstract (eng): | The change from GSM networks to third generation (3G) networks brings new requirements for the use of WAP applications. Implementations that have been done for the previous versions do not necessarily fit to the new environment, nor are they efficient. WAP protocol supports circuit switched networks and it is optimized for a narrow bandwidth and quite long network delays. The bandwidth has increased and delays have decreased along with the 3G network and, in addition, traffic has become packet switched. TCP/IP supports better packet switched traffic than WAP protocol and this is a more inherent option for 3G networks. Internet applications are possible to implement with the same programming languages for both wired and wireless Internet. This makes for a cost efficient programming environment. The object of this study is to compare the performance of the WAP and TCP/IP protocol WAP applications in the 3G network. The aim is to study how well different protocols can utilize the performance of the 3G network. Measurements are conducted in the Nokia test network. The first section introduces the UMTS network, why it was implemented and describes both UMTS network architecture and WCDMA radio technology. Then WAP and TCP/IP protocols are presented and how they are optimized to the wireless environment. The measurement section introduces the used tools, the measurement environment, and then we analyse and compare the measurement results. Finally, we draw conclusions from our study. |
Abstract (fin): | Muutos GSM-verkoista 3G-verkkoihin tuo myös uudet vaatimukset WAP-sovellusten käytölle. Uuden teknologian myötä aikaisempiin protokolliin tehdyt ratkaisut eivät välttämättä sovellu eivätkä ole tehokkaita uudessa toimintaympäristössä. WAP-protokolla tukee piirikytkentäisiä verkkoja ja on optimoitu pienille kaistanleveyksille ja suurille verkkoviiveille. Kolmannen sukupolven verkkojen myötä kaistanleveys on kasvanut, viiveet ovat pienentyneet ja liikenne on tullut pakettipohjaiseksi. TCP/IP, joka tukee paremmin pakettipohjaista liikennettä kuin WAP, on siten luonnollisempi vaihtoehto 3G-verkkoihin. Sovellukset Internetissä on mahdollista tehdä samoilla ohjelmilla sekä kiinteille Internetyhteyksille että liikkuvaan ympäristöön, joten samoilla kustannuksilla saadaan suurempi käyttäjämäärä. Tämän työn tarkoitus on vertailla WAP- ja TCP/IP-protokollalla toteutettujen WAP-palvelujen suorituskykyä kolmannen sukupolven verkossa. Tavoitteena on tutkia, kuinka hyvin eri protokollat pystyvät hyödyntämään 3G-verkon suorituskykyä. Työn mittaukset on toteutettu Nokian testiverkossa. Työ alkaa UMTS-verkon esittelyllä, miksi UMTS on toteutettu, sekä kerrotaan UMTS verkon arkkitehtuurista ja WCDMA:n radioteknologiasta. Seuraavaksi kerrotaan WAP- ja TCP/IP-protokollista ja niiden optimoinnista liikkuvaan ympäristöön. Mittausosa esittelee käytetyt työkalut ja mittausympäristön ja siinä käydään läpi mittaustulokset ja niiden vertailu. Lopuksi tehdään yhteenveto saavutetuista tuloksista. |
ED: | 2004-12-21 |
INSSI record number: 26576
+ add basket
« previous | next »
INSSI