search query: @keyword planar / total: 2
reference: 1 / 2
« previous | next »
Author:Ruusunen, Vesa
Title:Implementation and verification of a dynamic solid oxide fuel cell system model
Kiinteäoksidipolttokennojärjestelmän dynaamisen mallin toteutus ja verifiointi
Publication type:Master's thesis
Publication year:2005
Pages:71 s. + liitt.      Language:   eng
Department/School:Automaatio- ja systeemitekniikan osasto
Main subject:Automaatiotekniikka   (AS-84)
Supervisor:Halme, Aarne
Instructor:Suomela, Jussi
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark TKK  6557   | Archive
Keywords:SOFC
planar
system
fuel cell
ATR
zero-dimensional
model
Apros
simulation
SOFC
planaarinen
järjestelmä
polttokenno
ATR
nolla-ulotteinen
malli
Apros
simulointi
Abstract (eng): Fuel cells are seen as new greener way to produce energy.
Fuel cells types vary and suitable cell type depends on the application.
Computer modelling has become a commonplace and modelling is often used when developing systems before coming in to market.

This diploma thesis was made at VTT Technical Research Centre of Finland as part of FINSOFC project.
The aim was to model existing 5 kWe solid oxide fuel cell demonstration unit and verify the model against the measurements.

The focus of this thesis is in the implementation of the system model with Apros -process simulation software and tuning the SOFC-module to correspond to the actual 1 kWe stack installed in the system for the commissioning.
The zero-dimensional SOFC-model in Apros is developed at VTT.
To support the modelling describes the literature part the basis of fuel cell operation and computer modelling.
The basic mathematics and physics of cell reactions that can be used in modelling a fuel cell are explained.
Basis of auto thermal reforming is described as there is such reformer in the demonstration unit.
The demonstration unit is presented briefly.

Results of this thesis can be used when the SOFC-model is developed further.
Model can be used as a tool when demonstration unit is developed further and model of reformer is implemented and verified.
Abstract (fin): Polttokennot nähdään uutena vihreämpänä tapana tuottaa energiaa.
Polttokennotyyppejä on monta erilaista ja sopiva kennotyyppi riippuu käytettävästä kohteesta.
Tietokonemallinnuksesta on tullut jokapäiväistä ja mallinnusta käytetään uusien järjestelmien kehityksessä ennen markkinoille tuontia.

Tämä diplomityö on tehty Valtion teknillisessä tutkimuskeskuksessa osana FINSOFC projektia.
Tarkoituksena oli mallintaa olemassa oleva 5 kWe kiinteäoksidipolttokennodemonstraatiolaitos ja verifioida malli mittaustuloksia vastaan.

Tämä diplomityö käsittelee erityisesti järjestelmän mallin toteutusta Apros -prosessien simulointiohjelmalla, sekä SOFC-moduulin viritystä vastaamaan 1 kW kennostoa, joka oli asennettuna järjestelmän käyttöönottoa varten.
Aproksen nollaulotteinen SOFC-malli on tehty VTT:lla.
Mallinnuksen tueksi esitellään kirjallisuusosassa perusteet polttokennon toiminnasta ja tietokonemallinnuksesta.
Työssä selitetään yksinkertaiset matemaattiset ja fysikaaliset kennoreaktiot joita voi käyttää polttokennon mallinnuksessa.
Autotermisen reformoinnin perusteet esitetään ja demonstraatioyksikkö kuvataan lyhyesti.

Tämän työn tuloksia voidaan hyödyntää kun SOFC-mallia kehitetään.
Mallia voidaan käyttää työkaluna kun demonstraatioyksikköä kehitetään ja reformerin malli toteutetaan ja verifioidaan.
ED:2005-04-01
INSSI record number: 28247
+ add basket
« previous | next »
INSSI