search query: @keyword muovituotteet / total: 2
reference: 1 / 2
« previous | next »
Author: | Tiihonen, Juha Heikki |
Title: | Jäysteidenpoiston automatisointi muovituotteiden valmistuksessa |
Automation of trimming in plastic product manufacturing industry | |
Publication type: | Master's thesis |
Publication year: | 2010 |
Pages: | 60 Language: fin |
Department/School: | Koneenrakennustekniikan laitos |
Main subject: | Koneensuunnitteluoppi (Kon-41) |
Supervisor: | Pietola, Matti |
Instructor: | Ant-Wuorinen, Lauri |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 4755 | Archive |
Keywords: | extrusion blow molding automation robotics plastic manufacturing puhallusmuovaus automatisointi robotiikka muovituotteet |
Abstract (eng): | Purpose of this thesis was to find and study an economical way to automate the trimming of blow molded plastic products. Blow molding technique utilizes two mold parts and after blowing plastic to final shape there is usually a seam between the two mold halves. The seam has to be trimmed and cut to finalize the product. This work is usually done by hand using knife. Besides trimming the product, an automation system has also to be able to move product from the blow molding machine to a trimming workstation and from there to a pallet. Because of the complexity of the process an industrial robot is needed to achieve both trimming and moving tasks. As a result this thesis has recommendations how to initialize and carry out industrial automation project in plastics industry. |
Abstract (fin): | Tutkimuksen tavoitteena oli selvittää miten muovituotteiden valmistuksessa syntyvien jäysteiden poiston voi automatisoida ja onko se taloudellisesti kannattavaa. Puhallusmuovaamalla valmistetun tuotteen kaksi eri muotinpuoliskoa jättävät tuotteeseen jäystesauman joka poistetaan manuaalisesti veitsellä tuotteen viimeistelemiseksi. Tavoitteena oli myös käyttää samaa automaatiojärjestelmää tuotteen siirtämiseksi puhallusmuovauskoneesta työstöpaikalle ja siitä edelleen valmiiden tuotteiden kuljetinhihnalle. Monimutkaisen työprosessin suorittamiseksi käytetään teollisuusrobotteja jolloin samalla laitteella voidaan suorittaa varsinainen työstön lisäksi tuotteen siirtely. Tässä työssä perehdytään teollisuusautomaation ja robotiikan suunnitteluun ja käyttöönottoon kilpailuedun saavuttamiseksi muovituotteiden valmistuksessa. |
ED: | 2010-11-08 |
INSSI record number: 41273
+ add basket
« previous | next »
INSSI