search query: @instructor Peralta, José-Luis / total: 2
reference: 1 / 2
« previous | next »
Author: | Kusumah, Ferdi Perdana |
Title: | Foot force sensor implementation and analysis of ZMP walking on 2D bipedal robot with linear actuators |
Publication type: | Master's thesis |
Publication year: | 2011 |
Pages: | 92 s. + liitt. Language: eng |
Department/School: | Automaatio- ja systeemitekniikan laitos |
Main subject: | Automaatiotekniikka (AS-84) |
Supervisor: | Halme, Aarne ; Hyyppä, Kalevi |
Instructor: | Peralta, José-Luis |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 5170 | Archive |
Keywords: | bipedal robot center of pressure legged locomotion sensor calibration strain gage trajectory generator zero moment point |
Abstract (eng): | The objectives of this study were to implement force sensors on the feet of a bipedal robot and analyse their response at different conditions. The data will be used to design a control strategy for the robot. The powered joints of the robot are driven by linear motors. A force sensor circuit was made and calibrated with different kinds of weight. A trajectory generator and inverse kinematics calculator for the robot were made to control the robot walking movement in an open-loop manner. The force data were taken at a certain period of time when the robot was in a standing position. Experiments with external disturbances were also performed on the robot. The ZMP position and mass of the robot were calculated by using the data of force sensors. The force sensor circuit was reliable in taking and handling the data from the sensor although the noise from the motors of the robot was present. |
ED: | 2011-10-04 |
INSSI record number: 42846
+ add basket
« previous | next »
INSSI