search query: @keyword ohjeistaminen / total: 2
reference: 1 / 2
« previous | next »
Author:Koponen, Anders
Title:Kallion pultituksen ohjeistamisen kehittäminen
Development of a rock bolting manual
Publication type:Master's thesis
Publication year:2011
Pages:70 + [7]      Language:   fin
Department/School:Yhdyskunta- ja ympäristötekniikan laitos
Main subject:Kalliorakentaminen   (Rak-32)
Supervisor:Rinne, Mikael
Instructor:Mikkola, Jannis
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto     | Archive
Keywords:rock bolting
rock reinfortcement
regulations
rockbolt
kallion pultitus
kallion lujitus
ohjeistaminen
kalliopultti
Abstract (eng): The present Finnish rock bolting manual is over 30 years old and is considered outdated.
The goal of this research was to act as a pre-study for a new manual and to compile a proposal for the contents of the manual.

The Finnish manuals and regulations were compared to equivalent Swedish and Norwegian.
In addition, 17 Finnish specialists were interviewed.
The purpose of the interviews was to find out current practices and shortages.

The most remarkable differences between Finnish and other Scandinavian regulations concern preferred quality control methods and the influence of blasting vibrations on the grout during the setting.
Blasting close to grouted dowels during the setting time of the grout is restricted in Finland.

In Finland three different rock bolt types are used for permanent rock reinforcement: grouted dowels, combination bolts and self-drilling bolts.
Use of other bolt types for permanent reinforcement should be considered.
Instructions in relation to appliance of hot galvanizing and epoxy coating given by rock engineers differ a lot from each other.
Instructions about grout properties are also varied.
The quality of rock bolt installation is difficult to verify afterwards.
However, inadequate rock bolt installations have been noted.

A new manual is considered necessary.
Emphasis should be placed on defining different bolt types, grouts, detailed instructions for bolt installation, influence of vibration on grout during setting and quality control.
Abstract (fin): Nykyiset kalliopulttien asennusta ja laadunvalvontaa koskevat ohjeet ovat vuodelta 1977 ja niitä pidetään vanhentuneina.
Tämän työn tavoitteena oli toimia esiselvityksenä uudelle pultitusohjeelle ja laatia ehdotus ohjeistuksesta.

Työssä vertailtiin suomalaisia ohjeita suhteessa ruotsalaisiin ja norjalaisiin ohjeisiin.
Lisäksi haastateltiin 17 Suomessa toimivaa kallion pultituksen asiantuntijaa, pyrkimyksenä selvittää nykyisiä käytäntöjä sekä niissä esiintyviä puutteita.

Merkittävimmät erot suomalaisten ja ruotsalaisten sekä norjalaisten ohjeiden välillä koskevat louhintatärinän vaikutusta juotosmassan sitoutumiseen sekä laadunvalvontamenetelmiä.
Suomessa on rajoitettu juotospulttien asentamista räjäytyskohdan lähettyville, Ruotsissa ja Norjassa vastaavaa rajoitusta ei ole.
Ruotsissa ja Norjassa suositaan laadunvalvontamenetelmistä vetokoetta ja Suomessa juotosmassan sitoutumisvaiheessa tehtävää ulosvetokoetta.

Suomessa käytetään lopulliseen lujitukseen pääsääntöisesti kolmea eri pulttityyppiä: sementtilaastilla juotettua haljateräspulttia, yhdistelmäpulttia ja porapulttia.
Muiden pulttityyppien käyttämistä lopullisena lujituksena tulee tutkia.
Suunnittelijoiden antamat ohjeistukset ja laatuvaatimukset pulttien pinnoituksesta ovat hyvin vaihtelevia.
Ohjeet juotosmassan suhteutuksesta vaihtelevat myös paljon.
Pultituksen laatu on hankala todentaa jälkikäteen mutta pultitustyön laadussa on kuitenkin havaittu vaihtelevuutta.

Kallion pultituksen asiantuntijat pitävät uutta ohjetta tarpeellisena.
Sen laadinnassa tulee keskittyä eri pulttityyppien määrittämiseen, juotosmateriaaleihin, asennustapojen kuvauksiin, louhintatärinän vaikutukseen juotosmassan sitoutumiseen sekä laadunvarmistamiseen.
ED:2012-05-07
INSSI record number: 44389
+ add basket
« previous | next »
INSSI