search query: @author Koskela, Jesse / total: 2
reference: 1 / 2
« previous | next »
Author: | Koskela, Jesse |
Title: | Palosammutusjärjestelmän laukaisuventtiilin toiminnan kehittäminen |
The development of release valve for fire extinguishing system | |
Publication type: | Master's thesis |
Publication year: | 2012 |
Pages: | (5) + 57 s. + liitt. 9 Language: fin |
Department/School: | Koneenrakennustekniikan laitos |
Main subject: | Koneensuunnitteluoppi (Kon-41) |
Supervisor: | Pietola, Matti |
Instructor: | Helasuo, Jarmo |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 6476 | Archive |
Keywords: | water mist pre-action system release valve vesisumu ennakkolaukaisujärjestelmä laukaisuventtiili |
Abstract (eng): | This Master's Thesis deals with high pressure water mist fire protection systems. The aim of the Thesis was to study requirements and standards of double-interlock pre-action systems. According to these regulations and Marioff based requirements, the goal was to develop a double-interlock pre-action valve assembly. The literary study of this Thesis examined the properties of water mist to extinguish fires and explored a variety of water mist applications and installation types of water mist systems. In this Thesis were explored other water mist manufacturers such as Marioff systems. The purpose of this literary study was to compose basic knowledge of requirements to develop pre-action valve assembly. The valve cabinet product development process followed Marioff process based on general R&D process. The process began by specifying requirements for the product. Then the prototype was built based on the requirements. After developing phase, the cabinet was determined sprinkler type and tubing volume limits by tests and simulations. These limits were tested by the standards requiring 60 seconds maximum activation time for system. By simulations, the water bottle measuring environment was validated. The valve assembly had burst and leakage tests. At the final stage of the product development process, instructions were made for valve cabinet installation, operation, maintenance and spare parts. The cabinet potential risks were evaluated in the risk analysis, which occurred the most significant drawbacks were fixed. In the finishing phase, the product costs were analysed by detailing each manufactured and purchased component production and assembly costs. The result of the development process was the double-interlock pre-action system for high pressure water mist extinguishing system. This valve assembly was commercialized as the part of Marioff Corporation product line. |
Abstract (fin): | Tämä diplomityö käsittelee korkeapainevesisumujärjestelmiä. Työn tavoitteena oli selvittää kaksoislukittua ennakkolaukaisujärjestelmää koskevat standardit ja hyväksynnät. Näiden asetusten sekä Marioffin määrittämien vaatimusten pohjalta kehitettiin kaksoislukittu ennakkolaukaisuventtiilikokoonpano. Työn kirjallisuustutkimuksessa perehdyttiin vesisumun ominaisuuksiin palojen sammutuksessa. Näiden lisäksi tarkasteltiin erilaisia sovelluskohteita sumusammutuksessa ja näiden järjestelmien asennustyyppejä. Kehitettävän venttiilikokoonpanon pohjustukseksi etsittiin ja tutkittiin muiden valmistajien vesisumujärjestelmiä. Venttiilikaappikokoonpanon tuotteistaminen eteni Marioffin tuotekehitysprosessin mukaan. Tämä prosessi noudatti pääosin yleisiä tuotekehitysprosesseja. Prosessi aloitettiin määrittämällä vaatimukset tuotteelle. Vaatimusten pohjalta rakennettiin prototyyppi. jota kehitettiin ja paranneltiin prosessin aikana. Kehityksen lopputuloksena rakennettiin venttiilikaappi, jolle määritettiin suutinkohtaiset raja-arvot eri putkitilavuuksille testeillä ja simuloinneilla. Nämä arvot määräytyivät standardien edellyttämästä 60 sekunnin laukeamisajasta järjestelmälle. Simuloimalla varmistettiin alueputkistona toimivien vesipullojen validius testiympäristönä. Venttiilikokoonpano testattiin koeponnistamalla sekä vuototestillä. Tuotekehitysprosessin viimeisessä vaiheessa venttiilikaapille laadittiin ohjeet asennusta varten sekä käyttö-. huolto ja varaosaohje. Kaappikokoonpanon mahdolliset riskit arvioitiin riskianalyysissa. jossa esiintyneet merkittävimmät epäkohdat korjattiin. Viimeistelyvaiheessa tuotteesta tehtiin kustannusanalyysi, jossa eriteltiin jokaisen valmistetun ja ostetun komponentin tuotantoja kokoonpanokustannukset. Työn lopputuloksena kehitettiin kaksoislukittu ennakkolaukaisuventtiilikokoonpano. Tämä venttiilikokoonpano tuotteistettiin osaksi Marioff Corporation Oy:n tuotevalikoimaa. |
ED: | 2012-05-09 |
INSSI record number: 44441
+ add basket
« previous | next »
INSSI