search query: @keyword tuloslajittelu / total: 2
reference: 2 / 2
« previous | next »
Author:Mikkonen, Juha-Matti
Title:Tuloslajittelun käyttöönoton vaikutus sahatavaran lujuuslajitteluun
The effect of introduction of output control on strength grading of timber
Publication type:Master's thesis
Publication year:2012
Pages:108      Language:   fin
Department/School:Puunjalostustekniikan laitos
Main subject:Puutekniikka   (Puu-28)
Supervisor:Kairi, Matti
Instructor:Kotilahti, Timo
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  125   | Archive
Keywords:strength grading
output control
yield
quality control
lujuuslajittelu
tuloslajittelu
saanto
laadunvalvonta
Abstract (eng): The primary aim of this master's thesis is to extend the existing research material concerning output control of timber.
The study particularly focuses on establishing the effect of introduction of output control on strength grading of timber concerning both grading accuracy and the extent of required quality control.

This study is an action research in which case studies are used as research methods.
The case studies deal with a limited amount of both strength grades and dimensions of timber which further determine the scope of application of the study results.

According to the case studies by introduction of output control the grade-specific yield can be relatively improved by 417 % concerning strength grade C45, by 200 % concerning strength grade C40, by 143 % concerning strength grade C35 and by 36 % concerning strength grade C30.
Respectively, the dimension-specific yield can be relatively improved by over 130 % concerning timber widths of 100 mm and 125 mm, by 92 % concerning width of 150 mm and by 63 % concerning width of 200 mm.

According to the study results the grading accuracy of strength grading can be clearly improved by introduction of output control.
Relative improvements are greater in the case of higher strength grades and secondly, lower timber widths.
On the other hand, the extent of required quality control is quite large particularly when it comes to working hours.
Quality control required when grading one dimension to three different strength grades equals over two hours of testing per work shift.

Furthermore, based on the study results and market analyses it can be stated that output control is particularly well suited for the use of roof truss manufacturers.
Theoretical design strength of strength graded timber is enhanced by introduction of output control which further leads to potential growth of a roof truss' sales margin.
Abstract (fin): Tämän työn ensisijaisena tavoitteena on laajentaa olemassa olevaa tutkimusaineistoa sahatavaran tuloslajittelua koskien.
Työn tarkoituksena on erityisesti selvittää tuloslajittelun käyttöönoton vaikutus sahatavaran lujuuslajitteluun niin lajittelutarkkuuden kuin laadunvalvonnan laajuuden osalta.

Tämä työ on toimintatutkimus, jonka tutkimusmenetelmänä on käytetty tapaustutkimuksia.
Tapaustutkimuksissa on käsitelty rajallista määrää sahatavaran lujuusluokkia ja dimensioita, jotka määräävät työn tulosten soveltamisalan.

Tapaustutkimusten perusteella lujuuslajittelussa saavutettavaa lujuusluokkakohtaista saantoprosenttia kyetään suhteellisesti parantamaan lujuusluokan C45 kohdalla 417 %, lujuusluokan C40 kohdalla 200 %, lujuusluokan C35 kohdalla 143 % ja lujuusluokan C30 kohdalla 36 %.
Vastaavasti dimensiokohtaista saantoprosenttia kyetään suhteellisesti parantamaan sahatavaran leveyksien 100 mm ja 125 mm kohdalla reilulla 130 %, leveyden 150 mm kohdalla 92 % ja leveyden 200 mm kohdalla 63 %.

Tutkimustulosten perusteella lujuuslajittelun lajittelutarkkuutta kyetään parantamaan selvästi tuloslajittelun käyttöönoton myötä.
Lajittelutarkkuuden suhteellinen parantuminen on merkittävintä korkeimpien lujuusluokkien, ja taas pienempien sahatavaran leveyksien kohdalla.
Toisaalta, tuloslajittelun edellyttämä tuotannon laadunvalvonta vaatii mittavaa panostusta erityisesti miestuntien osalta.
Yhden sahatavaran dimension lajittelu kolmeen eri lujuusluokkaan vaatii koelankkujen testaamiseen yli kaksi tuntia aikaa työvuoroa kohti.

Lisäksi, tutkimustulosten ja markkina-analyysien perusteella voidaan todeta, että tuloslajittelu soveltuu erityisesti kattoristikkoteollisuuden käytettäväksi.
Tuloslajittelun myötä lajitellun sahatavaran teoreettinen suunnittelulujuus paranee, mikä edelleen johtaa yksittäisen kattoristikon myyntikatteen mahdolliseen kasvuun.
ED:2012-05-14
INSSI record number: 44503
+ add basket
« previous | next »
INSSI