search query: @keyword kustannuslaskelmat / total: 2
reference: 1 / 2
« previous | next »
Author: | Renvall, Jani |
Title: | Lisäävien menetelmien soveltuvuus prosessiteollisuuteen, soveltamiskohteena mekaaninen tiiviste |
Performance of additive manufacturing in the process industry, mechanical seals as a target of application | |
Publication type: | Master's thesis |
Publication year: | 2014 |
Pages: | 78 Language: fin |
Department/School: | Insinööritieteiden korkeakoulu |
Main subject: | Tuotantotekniikka (K3002) |
Supervisor: | Partanen, Jouni |
Instructor: | Törnqvist, Erik |
Electronic version URL: | http://urn.fi/URN:NBN:fi:aalto-201412033104 |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto | Archive |
Keywords: | additive machining additive manufacturing AM corrosion cost analysis DFM DFMA DLMS EBM AM lisäävä valmistus lastuava työstö mekaaninen tiiviste kustannuslaskelmat |
Abstract (eng): | The purpose of this master thesis is to study the performance of additive manufacturing (AM) for the process industry. The study focuses on the metallic structural parts of mechanical seal. The main research question can be simplified to "Is it possible to make mechanical seal using additive manufacturing methods?" The theoretical data of the study is collected from both professional literature and internet material published by private enterprises. Additional information is collected by interviewing machine manufacturers and engineering workshops. One of the studied manufacturing methods is chosen to produce a mechanical seal, according to gathered knowledge and with help of cooperation. The performance of the chosen method is evaluated by comparing the produced seal to a standard seal trough corrosion, manufacturing and operational tests. The production costs of the produced seal are also estimated by a novel analysis method created for this thesis. The powder bed fusion (PBF) was recognized as the most useful method of AM technology and the mechanical seal was manufactured by laser sintering. In corrosion tests the tested powder metals were verified to be similar to the conventional trade names of the materials. The manufactured seal was finished by chipping and its properties were verified to be equal to standard product. The production costs were determined to be comparable to standard product costs. According to information obtained in the course of this thesis, it is verified that it is possible to make functional mechanical seal by additive manufacturing technology. Production cost analysis encourages keeping on researching AM production for mechanical seals. |
Abstract (fin): | Tämän diplomityön tavoitteena on selvittää lisäävien menetelmien soveltuvuus prosessiteollisuuden näkökulmasta ja tarkastelu tehdään mekaanisen liukurengastiivisteen metallisille rakenneosille. Tutkimuskysymys voidaan kiteyttää seuraavasti: "Voiko lisäävillä menetelmillä tehdä mekaanisen tiivisteen?" Tutkimuksen teoreettinen aineisto koostuu alan kirjallisuudesta sekä yksityisten tahojen julkaisemista internetmateriaaleista. Tietoa kerätään myös laitevalmistaja- sekä konepajahaastatteluin. Kerätyn tiedon ja yhteistoiminnan pohjalta toteutetaan valitulla menetelmällä liukurengastiiviste, jonka onnistumista verrataan vakiotuotteeseen. Vertailua tehdään korroosion, valmistettavuuden sekä toiminnallisuuden suhteen. Valmistetulle tuotteelle tehdään lisäksi tuotantokustannusarviointi tutkimusta varten luodun analyysin avulla. Lisäävistä teknologioista pulveripetisulatusmenetelmä havaittiin toimivimmaksi vaihtoehdoksi ja tiiviste toteutettiin laserkoneistamalla. Korroosiokokeessa pulverimateriaalien todettiin vastaavan kaupallisen nimikkeen arvoja ja lastuavalla työstöllä viimeistellyn tuotteen ominaisuudet todettiin vastaavan vakiotuotetta. Tuotantokustannuksiltaan kyseinen menetelmä todettiin vertailukelpoiseksi vakiotuotteen kustannuksille. Tutkitun tiedon perusteella on todettavissa, että lisäävillä menetelmillä on mahdollista tehdä toimiva mekaaninen liukurengastiiviste. Lisäksi kustannuslaskelmien tulokset antavat rohkaisevan viittauksen sille, että lisäävien menetelmien ottamista tiivisteiden tuotantoon kannattaa tutkia lisää. |
ED: | 2014-12-21 |
INSSI record number: 50189
+ add basket
« previous | next »
INSSI