search query: @author Lehtinen, Saara / total: 2
reference: 1 / 2
« previous | next »
Author: | Lehtinen, Saara |
Title: | Simulation of stormwater quality in an urban catchment using the Stormwater Management Model (SWMM) |
Kaupunkivaluma-alueen huleveden laadun simulointi SWMM-mallilla | |
Publication type: | Master's thesis |
Publication year: | 2014 |
Pages: | xi + 87 s. + liitt. 5 Language: eng |
Department/School: | Yhdyskunta- ja ympäristötekniikan laitos |
Main subject: | Vesi- ja ympäristötekniikan sivuaine (R3005) |
Supervisor: | Koivusalo, Harri |
Instructor: | Krebs, Gerald |
Electronic version URL: | http://urn.fi/URN:NBN:fi:aalto-201412113212 |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 2551 | Archive |
Keywords: | stormwater SWMM quality parameterization urban modelling hulevesien laatu mallintaminen laatuparametrisointi |
Abstract (eng): | In the face of climate change, population growth and urbanization an understanding of stormwater quality processes and their prediction in urban areas are essential to make good use of stormwater and to minimize its detrimental impacts on the population and the environment. In this study a stormwater quality model calibration was conducted using the Stormwater Management Model (SWMM) for an urban catchment in Lahti, Finland by utilizing rainfall, runoff and turbidity data from the catchment outlet. The continuously observed turbidity data was converted to TSS concentrations, which represented water quality. With the aid of a genetic algorithm the calibration was conducted for five model parameters: the maximum build-up, build-up exponent, wash-off coefficient and wash-off exponent, which appear in the exponential build-up and wash-off functions of the model and the initial build-up of pollutants on the catchment surfaces. Three different sets of parameter boundaries and different calibration sequences of one, two or three events were used. A sensitivity analysis was conducted before and after the calibration to investigate the interrelations of the parameters and their effect on the model output. The simulation results showed that the exponential functions are adaptable within the requirement that fluctuations in water quality are related to fluctuations in runoff. A good performance was obtained for the calibration sequence, when three events were used. However, even three events are too small a sample of the vast variety of rainfall-runoff events and only a few of the validation events were able to be predicted with the calibrated parameters. Additionally, the importance of accurate data is well demonstrated. The results indicate that including the initial build-up as a calibration parameter improves the model performance. The parameters show complex interrelations, but some clear tendencies and regularities were identified. The same set of parameters was assigned for all impervious surfaces with the exception of one optimization, where the parameters for roof surfaces were optimized independently. Interestingly, this optimization produced the best performing parameters for the calibration sequence, which encourages for more detailed stormwater quality modelling. This study provides the obtained ranges and behaviour of the quality parameters as an approximation or a comparison for future stormwater quality modelling applications in similar urban catchments. |
Abstract (fin): | Ilmastonmuutoksen, väestönkasvun ja kaupungistumisen myötä hulevesien rooli kaupunkialueilla tulee yhä tärkeämmäksi. Hulevesien laatuprosesseja tulisi ymmärtää paremmin ja niitä pitäisi pystyä mallintamaan, jotta hulevettä voitaisiin hyödyntää ja toisaalta sen haitallisia vaikutuksia ihmisiin ja ympäristöön voitaisiin vähentää. Tässä työssä hulevesien määrää ja laatua kuvaava SWMM-malli kalibroitiin kaupunkivaluma-alueelle Lahdessa hyödyntäen sadanta-, valunta- ja sameusaineistoa valuma-alueen purkupisteestä. Sameus muutettiin kokonaiskiintoaineen konsentraatioksi, joka edusti huleveden laatua. Geneettisen algoritmin avulla suoritettiin kalibrointi viidelle parametrille: saasteiden lähtökertymälle valuma-alueen pinnoilla, sekä maksimikertymälle, kertymiseksponentille, huuhtoutumiskertoimelle ja huuhtoutumiseksponentille, jotka esiintyvät mallin eksponentiaalisissa kertymis- ja huuhtoutumisfunktioissa. Kalibroinnissa käytettiin kolmea erilaista parametrien vaihteluvälien joukkoa ja erilaisia yhden, kahden tai kolmen tapahtuman sarjoja. Herkkyysanalyysi suoritettiin ennen ja jälkeen kalibroinnin, jotta parametrien keskinäisiä suhteita ja vaikutuksia mallin tuloksiin voitaisiin tutkia. Työ osoittaa, että eksponentiaaliset funktiot ovat mukautuvia sillä ehdolla, että veden laadun vaihtelut seurailevat valunnan vaihteluita. Parhaat tulokset kalibrointijaksolle saatiin laajoilla vaihteluväleillä ja käyttämällä kolmea kalibrointitapahtumaa yhtä aikaa. Silti kolmekin tapahtumaa on hyvin pieni otos edustamaan kaikkia erilaisia sadanta-valuntatapahtumia, minkä vuoksi vain muutama validointitapahtuma pystyttiin ennustamaan kalibroiduilla parametreilla. Lisäksi tarkan ja luotettavan aineiston tärkeys tulee selvästi näkyviin. Työn tulokset viittaavat siihen, että lähtökertymän lisääminen kalibrointiparametriksi parantaa mallin toimivuutta. Laatuparametrit ovat monimutkaisesti sidoksissa toisiinsa, mutta joitakin selviä taipumuksia ja säännönmukaisuuksia voidaan tunnistaa. Optimoinneissa läpäisemättömille pinnoille annettiin samat laatuparametrit, paitsi yhdessä optimoinnissa kattopintojen parametrien annettiin vaihdella itsenäisesti. Tämä optimointi tuotti parhaan tuloksen kalibrointijaksolle, mikä kannustaa tutkimaan myös yksityiskohtaisempaa huleveden laadun mallinnusta. Tämä työ tarjoaa tietoa SWMM-mallin laatuparametrien käyttäytymisestä. Parametreille saatuja vaihteluvälejä voidaan käyttää suuntaa-antavina arvoina ja vertailukohtana tulevissa hulevesien laadun mallinnussovelluksissa samankaltaisilla kaupunkivaluma-alueilla. |
ED: | 2014-12-21 |
INSSI record number: 50221
+ add basket
« previous | next »
INSSI