search query: @keyword kuluminen / total: 20
reference: 7 / 20
« previous | next »
Author:Toikka, Matti
Title:Kulumista kestävät pinnoitteet teollisuusventtiileissä
Durable coatings for industrial valves
Publication type:Master's thesis
Publication year:2013
Pages:99      Language:   fin
Department/School:Koneenrakennustekniikan laitos
Main subject:Koneenrakennuksen materiaalitekniikka   (Kon-67)
Supervisor:Hänninen, Hannu
Instructor:Vierimaa, Kari ; Ilola, Risto
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto     | Archive
Keywords:valve
coating
tribology
pinnoite
venttiili
kuluminen
Abstract (eng):Tribological coatings surface treatments were tested with Metso's wear tester. The corrosion endurance of surface treatments was tested by a simple corrosion test. The diamond-like carbon coatings (DLC) had low coefficients of friction of 0.3 and endured well in test conducted in water. The solid lubricant 2 improved the coefficient of friction to less than 0.1. In ambient air most of the DLC's broke quickly. Only the DLC with solid lubricant 2 against stainless steel and DLC against chromium oxide endured the whole test in ambient air. These two test pairs were tested in 200 °C hot air and they worked well.

From the other tested coatings, the tungsten carbide-cobalt coatings (WC-Co) coated with high velocity oxy-fuel (HVOF) and high velocity air fuel (HVAF) method showed very little wear. The coefficients of friction were high with WC-Co coatings. The highest readings were measured in 300 °C air. The nitrided stainless steel and chromium carbide showed wear marks in the same tests. In the corrosion tests the kolstered stainless steel and the nitrided stainless steel showed corrosion in salt water. In potable water only the nitrided stainless steel corroded.

Further research is recommended for WC-Co coatings, nitrided stainless steel, DLC with solid lubricant 2 and the use of chromium oxide - DLC -pair.
Abstract (fin):Työn teoriaosassa käytiin läpi tribologian perusteet aiheeseen liittyvältä osalta. Lisäksi selvitettiin pinnoitteita ja pinnoitusmenetelmiä. Teoriaosan pohjalta valittiin saatavuuden rajoissa kokeelliseen osaan joukko pinnoitteita ja pintakäsittelyjä, joille suoritettiin nappihankauskokeita. Korroosioalttiille pintakäsittelyille tehtiin lisäksi yksinkertainen korroosiokoe.

Nappihankauskokeissa DLC-pinnoitteille mitattiin vedessä matala alle 0,3:n kitkakerroin ja pinnoitteet kuluivat vahan. Kiinteä voiteluaine 2 pienensi DLC:n kitkakerrointa alle 0,l:n. Huoneenlämpötilassa ilmassa valtaosa DLC-pinnoitteista rikkoutui pienellä operointimäärällä. DLC-pinnoitteista huoneenlämpötilassa ilmassa koko kokeen kesti ainoastaan kiinteällä voiteluaineella 2 käsitelty DLC ruostumatonta terästä vasten sekä käsittelemätön DLC kromioksidia vasten. Näille kahdelle pinnoiteparille tehtiin myös koe 200 °C:ssa ilmassa, jossa ne toimivat erinomaisesti. Muista pinnoitteista sekä HVOF- että HVAF-ruiskutettu WC-Co pinnoite kului kokeissa vahan, mutta kitkakertoimet olivat korkeat. 300 °C:ssa tehdyssä kokeessa WC-Co pinnoitteiden kitkakertoimet olivat välillä 0,7 - 1,1. Nitratun ruostumattoman teräksen kitkakerroin itseään vasten pysyi 0,4:n ja 0,6:n välissä. Kromikarbidin ja seostetun kromikarbidin koeparilla kitkakerroin oli 300 °C:ssa välillä 0,5 - 0,7. Nitrattu ruostumaton teräs ja kromikarbidi kuluivat kokeissa selvästi. Korroosiokokeissa nitrattu koekappale korrodoitui sekä vesijohtovedessä että suolaliuoksessa. Kolsteroitu koekappale korrodoitui vain suolaliuoksessa. Käsittelemättömässä perusaineessa ei tapahtunut havaittavaa korroosiota.

Kokeiden perusteella suositellaan tutkittavaksi lisää WC-Co pinnoitteita, kiinteällä voiteluaineella 2 käsiteltyä DLC:tä, kromioksidin käyttöä DLC:n vastinparina sekä nitratun ruostumattoman teräksen käyttömahdollisuuksia.
ED:2013-10-14
INSSI record number: 47308
+ add basket
« previous | next »
INSSI