search query: @keyword viilu / total: 22
reference: 10 / 22
« previous | next »
Author:Mäkelä, Mikko Juha-Matti
Title:Viilun vaikutus vanerin jäykkyyteen ja lujuuteen
The effect of veneer to stiffness and strength of plywood
Publication type:Master's thesis
Publication year:2012
Pages:81 s. + liitt. 6      Language:   fin
Department/School:Sovelletun mekaniikan laitos
Main subject:Lujuusoppi   (Kul-49)
Supervisor:Tuhkuri, Jukka
Instructor:Freund, Jouni
OEVS:
Electronic archive copy is available via Aalto Thesis Database.
Instructions

Reading digital theses in the closed network of the Aalto University Harald Herlin Learning Centre

In the closed network of Learning Centre you can read digital and digitized theses not available in the open network.

The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/

You can read theses on the Learning Centre customer computers, which are available on all floors.

Logging on to the customer computers

  • Aalto University staff members log on to the customer computer using the Aalto username and password.
  • Other customers log on using a shared username and password.

Opening a thesis

  • On the desktop of the customer computers, you will find an icon titled:

    Aalto Thesis Database

  • Click on the icon to search for and open the thesis you are looking for from Aaltodoc database. You can find the thesis file by clicking the link on the OEV or OEVS field.

Reading the thesis

  • You can either print the thesis or read it on the customer computer screen.
  • You cannot save the thesis file on a flash drive or email it.
  • You cannot copy text or images from the file.
  • You cannot edit the file.

Printing the thesis

  • You can print the thesis for your personal study or research use.
  • Aalto University students and staff members may print black-and-white prints on the PrintingPoint devices when using the computer with personal Aalto username and password. Color printing is possible using the printer u90203-psc3, which is located near the customer service. Color printing is subject to a charge to Aalto University students and staff members.
  • Other customers can use the printer u90203-psc3. All printing is subject to a charge to non-University members.
Location:P1 Ark Aalto  4314   | Archive
Keywords:plywood
veneer
statistics
birch
mechanical behaviour
vaneri
viilu
statistiikka
koivu
mekaaninen käyttäytyminen
Abstract (eng): This research investigates the effects of statistical features of veneers with the mechanical properties of plywood.
The mechanical properties comprise the bending stiffness and strength features of the plywood and veneers.
The research is performed using a statistical model which utilizes standard deviation of mechanical properties as well as the mean value.
The standard deviation model covers the random material properties of wood and their significant variation.

The objective of this study is to develop a calculation method for evaluating veneer stiffness and strength values.
The currently used calculation methods are not able to predict the mechanical behaviour of the plywood when the composition of plywood is changed.
In practice, this means that material tests are needed for every different plywood composition.
In order to develop and validate the new calculation method, several material tests are performed on different plywood structures.
The first structure contains a standard composing and the second contains special directional composition.
These two special structures are used to validate the calculation method.

The obtained results for special structures from both statistical and deterministic calculation methods are then compared.
In this study, deterministic calculation method corresponds to calculation method presented in the standards with certain assumptions.
The modulus of elasticity of veneers differs between two models approximately by 7 per cent, and the greatest difference for the plywood is 11 per cent whereas the average difference is approximately 6 per cent.
Therefore, there is no significant difference between the models when calculating the stiffness values of plywood and veneer.
However, the hypothetical examination shows that the statistical model yields lower strength values compared to the deterministic model.
Lower values follow a different failure criterion, but the results based on experimental data shows that the statistical model performs better for special structures o than the deterministic model.
Abstract (fin): Tässä työssä tutkitaan vanereissa olevien viilujen statistiikan vaikutusta vanerin mekaaniseen käyttäytymiseen.
Mekaanisella käyttäytymisellä tarkoitetaan vanerin ja sen viilujen lujuus- ja jäykkyysominaisuuksia kuormitettuna.
Statistiikan vaikutusta tutkitaan tilastollisen mallin avulla, joka huomioi nykyisten, determinististen laskentamenetelmien antamien tiettyjen keskiarvojen tai karakterististen arvojen lisäksi keskihajonnan vaikutuksen laskennassa.
Keskihajonnan avulla pyritään huomioimaan puun ominaisuuksien satunnaisuutta ja vaihtelua.

Työn tavoitteena on kehittää laskentamenetelmä vanerin viilujen jäykkyys- ja lujuusominaisuuksien laskemiseen.
Nykyiset standardien mukaiset menetelmät eivät kykene ennustamaan vanerin mekaanista käyttäytymistä ladonnan vaihtuessa, vaan tällöin tarvitaan uusia materiaalikokeita ominaisuuksien määrittämiseksi.
Laskentamenetelmän kehittämistä ja validointia varten suoritetaan materiaalikokeita kolmelle erilaiselle vanerirakenteelle.
Yksi rakenteista on standardiladonnalla valmistettu vaneri, josta viiluarvot lasketaan mallia varten.
Kaksi muuta rakennetta ovat suunnattuja erikoisrakenteita, kahdella eri paksuudella, joita käytetään mallin validointiin.

Tilastollisen mallin antamia tuloksia suunnatuille erikoisrakenteille verrataan deterministisen mallin antamiin tuloksiin.
Tässä yhteydessä esitetty deterministinen malli vastaa, tietyin oletuksin, standardien mukaisia laskentamenetelmiä.
Mallien tuottamassa viilun kimmomoduuliarvossa on eroa noin 7 prosenttia ja viiluarvosta edelleen lasketuissa vaneriarvoissa suurimmillaan 11 prosenttia, mutta keskimäärin noin 6 prosenttia.
Vanerin jäykkyyden laskennassa mallien välillä ei ole havaittavissa selvää eroa.
Mallien tuottamat kuormankantokyvyt eroavat erityisesti hypoteettisessa tarkastelussa, jossa tilastollinen malli tuottaa selvästi matalampia arvoja, johtuen erilaisesta murtokriteeristä deterministiseen malliin verrattuna.
Kokeellisen datan perusteella tilastollinen malli ennustaa erikoisrakenteiden lujuuden paremmin, sillä mallin tuottamissa arvoissa hajonta on selvästi pienempää kuin deterministisellä mallilla.
ED:2012-07-03
INSSI record number: 44774
+ add basket
« previous | next »
INSSI