search query: @keyword induction motor / total: 24
reference: 11 / 24
Author: | Tuovinen, Toni |
Title: | Oikosulkumoottorin kyllästyksen mallinnus |
Power electronics and electric drives | |
Publication type: | Master's thesis |
Publication year: | 2009 |
Pages: | vii + 52 Language: fin |
Department/School: | Elektroniikan, tietoliikenteen ja automaation tiedekunta |
Main subject: | Tehoelektroniikka (S-81) |
Supervisor: | Luomi, Jorma |
Instructor: | Hinkkanen, Marko |
Electronic version URL: | http://urn.fi/URN:NBN:fi:aalto-201203071330 |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark S80 | Archive |
Keywords: | induction motor motor model mutual saturation parameter estimation saturation model keskinäiskyllästys kyllästysmalli moottorimalli oikosulkumoottori parametrien estimointi |
Abstract (eng): | This thesis deals with modeling of inductances in induction motors. The aim of this thesis is to develop analytical, lossless saturation models for simulation purposes and frequency converter-fed drives. The proposed models should predict the saturation due to main and leakage flux interaction. The effect of this mutual saturation is particularly strong in motors with closed or skewed rotor slots. The proposed models are simple and physically reasonable. The proposed polynomial model can be used in applications where high accuracy is desirable. The proposed power function model can be used in applications where high accuracy is desirable and the number of free parameters should be low. The proposed piecewise-defined model can be used in applications where the order of the model and the number of free parameters should be low. Methods for obtaining the model parameters from steady-state quantities are proposed. The model parameters are identified for measured steady-state data and steady-state data obtained from finite element analysis of both 2,2-kW and 45-kW induction motors. The steady-state estimates obtained from the models are compared to the reference quantities used in the parameter identification. According to the results, the effect of the saturation due to main and leakage flux interaction on the magnetizing inductance and on the rotor leakage inductance is significant in the studied motors. The proposed models can be used in applications where high accuracy for the inductance model is required, particularly if the effect of the saturation due to main and leakage flux interaction is notable. |
Abstract (fin): | Tämä työ käsittelee oikosulkumoottorien induktanssien mallinnusta. Työn tavoitteena on kehittää simulointiin ja taajuusmuuttajakäyttöön soveltuvia häviöttömiä kyllästysmalleja, jotka ottavat huomioon päävuon ja roottorin hajavuon välisen keskinäisen kyllästyksen vaikutuksen magnetointi-induktanssiin ja roottorin hajainduktanssiin. Keskinäiskyllästyksen vaikutus on erityisen voimakasta moottoreissa, joissa on suljetut tai vinot roottoriurat. Ehdotetut mallit ovat yksinkertaisia ja fysikaalisesti järkeviä. Ehdotettua polynomimallia voidaan käyttää sovelluksissa, joissa halutaan suurta tarkkuutta. Ehdotettua potenssifunktiomallia voidaan käyttää sovelluksissa, joissa malli halutaan pitää lähes yhtä tarkkana kuin polynomimalli ja samalla mallin parametrien määrä halutaan pitää pienenä. Ehdotettua paloittain määriteltyä mallia voidaan käyttää sovelluksissa, joissa mallin kertaluku ja parametrien määrä halutaan pitää pienenä. Työssä esitetään menetelmät ehdotettujen mallien parametrien estimoinnille. Mallien parametrien estimoinnissa käytetään 2,2 kW:n ja 45 kW:n oikosulkumoottorien mitattua pysyvän tilan dataa sekä elementtimenetelmällä laskettua pysyvän tilan dataa. Mallien avulla estimoituja pysyvän tilan suureita verrataan sovituksessa käytettyihin referenssisuureisiin. Tulosten perusteella keskinäiskyllästyksen vaikutus magnetointiinduktanssiin ja roottorin hajainduktanssiin tarkastelluissa moottoreissa on varsin suuri, ja mallit ennustavat tämän vaikutuksen hyvin. Ehdotettuja malleja voidaan käyttää sovelluksissa, joissa induktanssit halutaan mallintaa mahdollisimman tarkasti, erityisesti jos keskinäiskyllästyksen vaikutus on suuri. |
ED: | 2009-10-08 |
INSSI record number: 38454
+ add basket
INSSI