search query: @keyword Additive manufacturing / total: 25
reference: 19 / 25
Author: | Lehtinen, Pekka A. |
Title: | Projection microstereolithography equipment |
Projektiomikrostereolitografialaitteisto | |
Publication type: | Master's thesis |
Publication year: | 2013 |
Pages: | [7] + 67 Language: eng |
Department/School: | BIT-tutkimuskeskus |
Main subject: | Optiikka ja molekyylimateriaalit (Tfy-125) |
Supervisor: | Kaivola, Matti |
Instructor: | Partanen, Jouni |
Electronic version URL: | http://urn.fi/URN:NBN:fi:aalto-201303221839 |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 22 | Archive |
Keywords: | additive manufacturing rapid prototyping stereolithography microstereolithography materiaalia lisäävä valmistus pikavalmistus stereolitografia mikrostereolitografia |
Abstract (eng): | Stereolithography (SL) is one of the most successful additive manufacturing technologies. In SL a three-dimensional object is fabricated directly from a CAD model. The product is manufactured layer-by-layer by curing liquid resin. These layers, which are built on one another, form the product. In projection stereolithography (PSL) the laser light source and scanner system commonly used in SL, are replaced with a digital micromirror device (DMD) or a liquid crystal display (LCD). Thus, each layer is cured at once in one exposure according to the pattern on the DMD or LCD. Projection microstereolithography (PµSL) operates on the same principle as PSL, but the fabrication resolution is significantly higher. In this study, a PµSL setup with a DMD chip is constructed and a computer code is written to control the entire manufacturing process. |
Abstract (fin): | Stereolitografia on menestyksekkäimpiä materiaalia lisääviä valmistusteknologioita. Stereolitografiassa kolmiulotteinen kappale tehdään suoraan CAD-mallista. Tuote valmistetaan kovettamalla nestemäistä resiiniä kerroksittain. Nämä päällekkäin kootut kerrokset muodostavat kappaleen. Projektiostereolitografiassa (PSL) laservalonlähde ja skanneri on korvattu DMD-sirulla (Digital Micromirror Device) tai nestekidenäytöllä (LCD), jolloin jokainen kerros kovettuu DMD:ssä tai LCD:ssä olevan kuvion mukaisesti kertavalotuksella. Projektiomikrostereolitografia (PµSL) toimii samalla periaatteella kuin PSL, mutta kappale valmistetaan huomattavasti paremmalla tarkkuudella. Tässä työssä rakennetaan DMD:tä käyttävä PµSL-laitteisto ja kirjoitetaan tietokoneohjelma valmistusprosessin hallintaa varten. |
ED: | 2013-03-14 |
INSSI record number: 45941
+ add basket
INSSI