search query: @keyword solar cell / total: 26
reference: 8 / 26
Author: | Salpakari, Jyri |
Title: | Development of thin film and crystalline silicon solar cells with advanced light management based on plasmonic and dielectric nanostructures |
Edistyneen plasmonisiin ja eristenanorakenteisiin perustuvan valonhallinnan kehitystä ohutkalvo- ja kiteisen piin aurinkokennoihin | |
Publication type: | Master's thesis |
Publication year: | 2012 |
Pages: | [9] + 86 Language: eng |
Department/School: | Teknillisen fysiikan laitos |
Main subject: | Ydin- ja energiatekniikka (Tfy-56) |
Supervisor: | Lund, Peter |
Instructor: | Lenzmann, Frank |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 31 | Archive |
Keywords: | solar cell plasmonics anti-reflection coating light management texturing Asahi U nanophotonics aurinkokenno plasmoniikka antiheijastuspinnoite valonhallinta tekstuuri Asahi U nanofotoniikka |
Abstract (eng): | In this thesis, light scattering plasmonic nanostructures were studied as light management techniques in silicon solar cells with an experiment and a literature review, and solar cell designs was developed for future research on plasmonic and dielectric nanostructures. The broad literature review on the state of the art of plasmonic scatterers revealed that such nanostructures on the front side of Si solar cells have been shown to be superior to flat cells with an optimized anti-reflection coating, but the use of texturing has not been outperformed. Plasmonic nanostructures at the back, combined with Mie scatterers at the front side, have been shown to outperform the Asahi U texture for ultra-thin film a-Si solar cells. The effect of computationally optimized arrays of Ag and Al nanoparticles on the front surface of thin-film a-Si:H solar cells on the photovoltaic performance of the device was studied experimentally. The nanostructures enhanced EQE at long wavelengths, and decreased at short. The Ag structure enhanced JSC by 4.6 % compared to the best measured flat cell structure with an anti-reflection coating, and the Al structure by 3.4 %. To the best of the author's knowledge, an experimental demonstration of performance enhancement with an Al nanostructure has not been presented thus far in the literature. Crystalline Si solar cell designs were developed for experiments with metallic and dielectric photonic nanostructures. The designs are based on the IBC Si-HJ architecture and processed on mirror-polished FZ mono-Si wafers, with surface passivation implemented with SiNx for the cells with metallic nanoparticles and a-Si:H for the cells with dielectric nanoparticles. |
Abstract (fin): | Tässä diplomityössä tutkittiin valoa sirottavia plasmonisia nanorakenteita piiaurinkokennojen valonhallintamenetelminä kokeellisesti ja kirjallisuusselvityksellä, ja suunniteltiin sopivat aurinkokennot metallisilla ja eristenanohiukkasrakenteilla tapahtuvaa tulevaa tutkimusta varten. Valoa sirottavien plasmonisten nanorakenteiden tekniikan nykytila selvitettiin laajalla kirjallisuuskatsauksella. On osoitettu, että tällaiset nanorakenteet yhdistettynä antiheijastuspinnoitteeseen piiaurinkokennon etupinnalla ovat parempi valonhallintamenetelmä kuin tasainen kenno, jossa on pelkkä optimoitu antiheijastuspinnoite. Teksturointia paremmin toimivaa kennon etupinnalla olevaa plasmonista nanorakennetta ei ole pystytty esittämään. Kennon takapinnalla olevan plasmonisen nanorakenteen, yhdistettynä Mie-sirottajaan kennon etupinnalla on osoitettu toimivan teollisuudessa käytettyä Asahi U -tekstuuria paremmin ultraohuissa amorfisen piin aurinkokennoissa. Laskennallisesti optimoitujen, a-Si:H-ohutkalvoaurinkokennojen etupinnalle valmistettujen Ag- ja Al- nanohiukkashilojen vaikutusta laitteen toimintaan tutkittiin kokeellisesti. Nanorakenteet paransivat laitteen ulkoista kvanttihyötysuhdetta pitkillä aallonpituuksilla ja heikensivät sitä lyhyillä. Hopeananohiukkasrakenne paransi oikosulkuvirtaa 4,6 % verrattuna parhaaseen mitattuun tasaiseen pelkällä antiheijastuspinnoitteella varustettuun kennoon, alumiininanohiukkasrakenne 3,4 %. Kirjallisuudesta ei löytynyt viitettä kokeellisesti osoitetusta aurinkokennon oikosulkuvirran paranemisesta alumiininanohiukkasrakenteella. Kiteisen piin aurinkokennot suunniteltiin metallisilla ja eristenanohiukkasrakenteilla tapahtuvaa tulevaa tutkimusta varten. Kennot perustuvat IBC-heteroliitosarkkitehtuuriin, ne prosessoidaan mekaanis-kemiallisesti kiillotetuille FZ-yksikiteisille piikiekoille, ja niiden pintapassivointi toteutetaan piinitridillä metallisten nanohiukkasten tapauksessa ja amorfisella piillä eristenanohiukkasten tapauksessa. |
ED: | 2012-12-19 |
INSSI record number: 45727
+ add basket
INSSI