search query: @keyword runnability / total: 27
reference: 5 / 27
Author: | Luukka, Pyry |
Title: | Evaluating the runnability of a heatset web offset process by online data analysis |
Heatset web offset painoprosessin ajettavuuden arvioiminen online data-analyysillä | |
Publication type: | Master's thesis |
Publication year: | 2010 |
Pages: | 82 s. + liitt. 6 Language: eng |
Department/School: | Puunjalostustekniikan laitos |
Main subject: | Paperi- ja painatustekniikka (Puu-21) |
Supervisor: | Paltakari, Jouni |
Instructor: | Kosonen, Mika |
OEVS: | Electronic archive copy is available via Aalto Thesis Database.
Instructions Reading digital theses in the closed network of the Aalto University Harald Herlin Learning CentreIn the closed network of Learning Centre you can read digital and digitized theses not available in the open network. The Learning Centre contact details and opening hours: https://learningcentre.aalto.fi/en/harald-herlin-learning-centre/ You can read theses on the Learning Centre customer computers, which are available on all floors.
Logging on to the customer computers
Opening a thesis
Reading the thesis
Printing the thesis
|
Location: | P1 Ark Aalto 2197 | Archive |
Keywords: | runnability data-analysis heatset web offset printing HSWO online measurement ajettavuus data-analyysi heatset web offset painatus online-mittaus |
Abstract (eng): | In this work, the runnability of a full scale heatset web offset printing machine was studied, using online data analysis. The main objective was to examine the functioning of the collection system and its suitability for determining the runnability of the printing press. A second goal was to use the data analysis methods to identify the signals critical for the runnability of' the press, and the disturbances and deviations present in the examined machine. A data collection system was built on the examined HSWO printing press, by using only the existing measuring instrumentation on the press. The data used for the analysis consisted of 236 signals, collected from the press during a 6 month period. The data was analyzed using Savcor Wedge and MatLab software. As a part of the work, a trial was made studying the effect of a skewed tension profile of paper on the runnability of a printing press. During the study, a better understanding about the runnability of the examined printing press was gained. Even though, the runnability of the press was good, several phenomena, causing deviations and disturbances were identified. They were roll changes, blanket washes, tension oscillation, dryer functions, tension profile of the paper, and telescoped paper rolls. The blanket washes were found to be responsible for the highest web tension peaks, reaching as high as 80 daN/m tensions. Another very remarkable finding, was a regular tension oscillation with a cycle time of 0.32 seconds, and an amplitude of 10 - 15 daN/m. The tension profile of the paper was found to have considerable effect on the lateral movement of the web in the printing press. The online data collection setup tested was found to be very capable of performing this sort of task, and Savcor Wedge was proven to be a appropriate software for the data analysis. The collection system worked reliably, and by using a data logger, accurate, and high sample rate data was collected from the printing press. Using the experiences gathered from the project, a framework for the service concept was established. |
Abstract (fin): | Tässä työssä tutkittiin tuotantokäytössä olevan heatset web offset-painokoneen ajettavuutta online data-analyysin avulla. Päätavoitteena oli selvittää käytetyn keruujärjestelmiin toimivuutta, ja sen soveltuvuutta painokoneen ajettavuuden määrittämiseen. Toinen tavoite oli löytää ajettavuuden arvioimisen kannalta oleelliset signaalit, sekä tunnistaa mahdolliset häiriöt ja poikkeamat tutkitusta painokoneesta data-analyysiä käyttämällä. Eräälle suomalaiselle HSWO-painokoneelle rakennettiin datakeruujärjestelmä, käyttäen vain koneessa valmiina olevia mittalaitteita. Dataa kerättiin 236 signaalista kuuden kuukauden aikana. ja se analysoitiin käyttämällä Savcor Wedge ja Matlab ohjelmistoja. Osana työtä tehtiin koeajo. jossa tutkittiin vinon kireysprofiilin vaikutusta paperin ajettavuuteen painokoneella. Tutkimuksen tuloksena saatiin lisää tietoa tutkitun painokoneen ajettavuudesta, ja vaikka sen todettiin olevan hyvällä tasolla, useita häiriöitä ja poikkeavuuksia aiheuttavia ilmiöitä voitiin tunnistaa. Näitä olivat: rullanvaihdot, painoyksiköiden pesut, ratakireyden vaihtelu, kuivausuunin toiminta, paperiradan kireysprofiili, sekä paperirullien patapäisyys. Painoyksiköiden pesuliuotteet aiheuttivat suurimmat prosessista löydetyt kireyspiikit. Niiden aikana kireys saattoi nousta jopa 80 daN/m:n. Toinen erittäin merkittävä löytö oli kireyden jaksollinen heilunta. Heilunnan amplitudi oli luokkaa 10 - 15 daN/m ja jaksonaika 0.32 sekuntia. Paperin kireysprofiilin huomattiin vaikuttavan huomattavasti paperiradan sivuttaissuuntaiseen liikkumiseen painokoneessa. Testatun datakeruujärjestelmän todettiin soveltuvan erinomaisesti tämän kaltaiseen käyttötarkoitukseen. Myös Savcor:n Wedge-ohjelmisto osoittautui sopivaksi data-analyysin tekemiseen. Keruujärjestelmän luotettavuus oli korkealla tasolla, ja dataloggerin avulla pystyttiin keräämään tarkkaa dataa korkealla taajuudella. Projektista kerättyjen kokemusten avulla muodostettiin kehys palvelukonseptille. |
ED: | 2010-03-22 |
INSSI record number: 39345
+ add basket
INSSI